• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1008-1012
• /
• 2005

최근 디지털 카메라, 영상관련 디지털 기기들의 증가와 DMB(Digital Multimedia Broadcasting)의 시작으로 영상 처리 분야의 중요성이 점차 높아지고 있으며, 적절히 교정하지 못한 영상은 너무 밝거나 또는 너무 어둡게 보일 수 있기 때문에 영상을 컴퓨터 스크린에 정확하게 표현하는 감마교정은 영상을 디스플레이 하는 장치에서 더 많은 비중을 차지하고 있다. 본 논문에서는 영상 입력 장치 또는 카메라 이미지 센서로부터 얻은 Bayer Data 가 전처리 과정에서 수행하는 감마교정에 대해 이해하고, ROM에 감마 값을 고정하여 수행하지 않았다. 구간 선형 알고리즘을 이용한 하드웨어적인 처리를 수행하는 감마 교정을 구현하고자 한다. 이를 위해서 Visual C++을 이용하여 소프트웨어적인 구현과 구간 선형법 알고리즘을 이용한 구현을 검증한 후, 구간 선형 알고리즘을 적용한 감마 교정을 하드웨어로 설계 후, Modelsim6.0a를 이용하여 데이터를 검증한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.168-177
• /
• 1998

The effects of the regeneration parameters such as inlet gas temperature, space velocity, oxygen concentration of the exhaust gas, and initial particulate loading on the oxidation of the particulate inside ceramic cordierite filter have been investigated through an engine experiment. As the inlet gas temperature increases, the remarkable filter temperature occurs owing to the rapid combustion rate. Though the higher space velocity affirms the safe regeneration, it also requires much fuel consumption of the burner. For that reason, the space velocity should be compromised considering the fuel economy. The excessive accumulation of the particulate may cause undesirable regeneration temperatures inside filer even under the optimized regeneration condition. The inlet gas temperature should be selected to overcome the variation of the oxygen concentration which is inherent feature of the diesel engine. It is the most important factor in the regeneration control techniques.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.576-585
• /
• 2020

This study quantitatively investigated the increase in ballasting time through numerical calculations when an ultraviolet (UV) ballast water management system (BWMS) is installed on an existing vessel. The calculation results indicate that the ballasting time of a gas carrier having 55,000 dead weight tonnage was 2.152 hours without installation of the UV BWMS and implementation of a flow control function. Ballasting time increased by 14.2% after installing the UV BWMS, and it increased by 20.4% with both its installation and implementation of a flow control function. If actual conditions are taken into account, ballasting time after installing the UV BWMS is estimated to increase by at least 30% compared with current ballasting time. Therefore, when concerned parties select a UV type BWMS, it is advisable for them to minimize ship operation losses from an increase in ballasting time by considering the capacity of the actual ballast pumps on board and the flow energy loss of the UV BWMS. Additionally, it is recommended that a BWMS with larger capacity, larger pipes, and pipes with inside coatings be used to minimize the increase in ballasting time after installation of the BWMS.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2005.11a
• /
• pp.181-182
• /
• 2005

• Journal of Korean Society on Water Environment
• /
• v.33 no.2
• /
• pp.170-180
• /
• 2017

The study used jet water flow, ultra-sonication and ozonation system units to investigate impact of the unit components on water quality of stagnant Yeo-cheon River reach, Korea. Samples were collected at six locations, before operation and after 1, 3 and 6 hrs of operation. By operating the water flow unit only, dissolved oxygen increased as high as 90% after 3 hr at 25 m downstream of the device and Chl-a was reduced by 80%. Incorporating sonication, greater than 80% of Chl-a was removed even at 100 m distance from the device. Besides, total dissolved phosphorus was reduced from an average value of $420({\pm}70){\mu}g/L$ before ultrasonic irradiation to $160({\pm}40){\mu}g/L$ after the treatment. Releasing ozone into the flow with sonication, Chl-a was considerably removed from the water column and ammonia nitrogen was also decreased to average value of $20{\mu}g/L$ from $60{\mu}g/L$. However, as only $3{\ast}10^{-3}mg/L$ of ozone was used for safety purpose and due to brief reaction time it takes, effect of integrating ozone to the system covered limited area. Generally, combining sonication to jet flow is promising in preventing algal bloom formation since it has effectively removed Chl-a from the water column.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.55-64
• /
• 2009

For realizing ubiquitous computing, many research activities are geared towards various areas including embedded computing, RFID, USN, home networking, context-awareness, and etc. By using the ability of RFID technology to recognize a number of objects simultaneously, more convenient ubiquitous application services are effectively provided. In this case, RFID middleware playing a role as a bridge between RFID reader devices and application services is required as well. In this paper, we propose a method of handling a number of types of RFID reader devices in ALE middleware of EPCglobal. For this, the information of connection and data protocol for a reader device is stored in a database as ontology meta-data, and used to interpret the data read by a reader device. By adding ontology data into a database, even though an RFID device newly emerges, ALE middleware can not only handle the device, but also be effectively extended through reusing ontology data, without any changes in the middleware.

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.341-347
• /
• 2005

본 논문은 터널에서 화재 발생 시, 시간에 따른 연기거동에 대해 실물실험과 3차원 수치해석을 수행하고 각각의 결과를 비교,검토하였다. 실물실험을 위하여 8.8 kW의 열원과 901iter/h의 연기 발생이 가능한 연기발생장치를 자체 제작하였으며, 대상터널은 길이 570m, 단면적 $64.6m^2,$ 그리고 약 $2\%$의 구배를 가지고 있다. 실험은 외풍의 영향을 줄이기 위해 터널 입,출구에 차단막을 설치하였으며 연기발생장치로부터 20m 간격의 위치에서 20초 간격으로 연기전파, 속도 그리고 온도를 측정하였다. 연기는 60초 경과 후, 연기발생장치로부터 20m 떨어진 위치에 도달하였으며 140초, 180초 및 260초 경과 후, 각각 40m, 60m 및 80m 위치에 도달하였다. 3차원 수치해석의 결과는 터널벽면을 매끈한 표면으로 처리하였을 때, $26.3\~49.5\%$정도 과대 예측하였다. 또한 터널벽면을 일정 조도를 갖는 거친 표면으로 처리한 경우는 $-2.7\~17.6\%$ 오차로 실험결과에 보다 근접하는 결과를 보였다. 따라서 터널 내 연기거동에 대한 3차원 수치해석을 수행할 때에는 벽면조도에 대한 고려가 필요하리라 판단된다.

• Journal of dental hygiene science
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2014

The purpose of this study was to investigate the killing effect of Candida albicans on hairless mouse-2 (HRM-2) mouse tissues. We tested the effectiveness of a non-thermal atmospheric pressure plasma in killing C. albicans strains. The viability of C. albicans was determined by counting the colony forming units (CFU), after non-thermal atmospheric pressure plasma treatment. When non-thermal atmospheric pressure plasma was repeatedly treated on mouse skin which inoculated with C. albicans. The C. albicans cells were planted on skin tissue, and then the infected mouse tissue was exposed to non-thermal atmospheric pressure plasma for 0 sec, 60 sec, 180 sec and 300 sec. The death rate of C. albicans was increased in dependent with treatment times. The three times of non-thermal atmospheric pressure plasma at the interval of 10 minutes significantly showed the 6 log CFU/ml reduction of death rate on HRM-2 mouse tissues. Thus, non-thermal atmospheric pressure plasma could be used for the disinfection of C. albicans on oral surface.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1867-1879
• /
• 1997

DREAM-S is a distributed main-memory database system for the real-time processing of shared operational datra in ATM switching systems. DREAM-S has a client-server architecture in which only the server has the diskstorage, and provides the T-Tree index structure for efficient accesses to the data. We propose a recovery technique for the T-Tree index structre in DREAM-S. Although main-memory database system offer efficient access performance, the database int he main-memory may be broken when system failure such as database transaction failure or power failure occurs. Therfore, a recovery technique that recovers the database (including index structures) is essential for fault tolerant ATM switching systems. Proposed recovery technique relieves the bottleneck of the server processors disk operations by maintaining the T-Tree index structure only in the main-memory. In addition, fast recovery is guaranteed even in large number of client systems since the T-Tree index structure(s) in each system can be recovered cncurrently.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.13-17
• /
• 2004

In order to measure the retina thickness, the retina photographing system and the multi-channel high speed image data acquisition system is developed. This system requires the optical processing techniques and the high speed image processing techniques. The HeNe laser beam is projected the retina in artificial eye and then we sensed the reflected laser signal using APD array. The laser projection system on retina using optical instruments is implemented. In order to project the plane laser beam on retina, laser photographing system used the polygon mirror for horizontal scanning and the galvano mirror for vertical scanning. We acquired retina images in each channel of APD array, transferred computer using PCI interface the image data after real-time A/D converting.