• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.17-25
• /
• 2003

Velocity field behind a container ship model with a rotating propeller has been investigated using PIV (particle image velocimetry) system. Four hundred instantaneous velocity fields were measured at 4 different blade phases and ensemble-averaged to investigate the spatial evolution of vortical structure of near wake within one propeller diameter downstream. The phase-averaged mean velocity fields show the potential wake and the viscous wake formed due to the boundary layers developed on the blade surfaces. The interaction between bilge vortex developed along the hull surface and the tangential velocity component of incoming flow causes to have asymmetric flow structure in the transverse plane.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.4 s.5
• /
• pp.57-64
• /
• 1999

The prediction method of the performance and aerodynamic noise from a sirocco fan was developed and compared with measured data. To predict the performance of the sirocco fan, the well-known slip coefficients and various loss models were tested and applied to forward curved sirocco impellers. Using loss models proposed for both impeller and casing, the predicted performance characteristics were in good agreement with measured ones by an ANSI test plenum. Various scaling models for aerodynamic noise from the sirocco fan were evaluated and tested against measured power levels in terms of flow coefficient. It was shown that the turbulent broadband sound power from the sirocco fan can be modeled successfully by trailing edge noise.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.48-53
• /
• 2011

Current trends in propeller design have led to the need for extremely complex blade shapes, which place great demands on the accuracy of design and analysis methods. This paper presents a new proposal for improving the prediction of propeller performance with a vortex lattice method using the lifting surface theory. The paper presents a review of the theory and a description of the numerical methods employed. For 8 different propellers, the open water characteristics are calculated and compared with experimental data. The results are in good agreement in the region of a high advanced velocity, but there are differences in the other case. We have corrected the parameters for the trailing wake modeling in this paper, and repeated the calculation. The new calculation results are more in agreement with the experimental data.

• Journal of ILASS-Korea
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2003

The flow analysis of the axial fan of rotary burner was performed by SIMPLE(Semi Implicit Method for Pressure Linked Equations) algorithm and finite volume mothod performed in the case of 3-D, incompressible, turbulent flow. In this study, the coordinate transformation was adapted for the complex geometry of axial fan, and the standard $k-{\varepsilon}$ model and wall function method were used for analysis of turbulent flow. Multi-block grid system was used for flow field and divided into four domains such as the inlet, outlet, flow field of rotating vane, and tip clearance. Fan rotation was simulated by rotational motion using MRF(Multiple Rotating Reference Frame) in steady, incompressible state flow.

• Journal of Technologic Dentistry
• /
• v.6 no.1
• /
• pp.5-10
• /
• 1984

This experimental study was performed to investigate the effect of the wax extension method of posterior palatal seal area, introduced by Vig, on the amount of the vertical occlusal change of processed dentures. Twenty samples of maxillary wax trial dentures were constructed. Among them, the posterior palatall seal of ten samples were extended with wax over the posterior wall of the cast while that of the other ten were not. Then all were processed with self-curing resin and the amount of the vertical occlusal change was compared. The obtained result was that this method was proved to be effective in reducing the amount of the vertical occlusal change occuring in denure proccsing.

• Korean Journal of Ichthyology
• /
• v.12 no.2
• /
• pp.89-95
• /
• 2000

Two species of the genus Koreocobitis in Korea are reviewed with a key to species and their illustrations: Koreocobitis rotundicaudata and K. naktongensis sp. nov. A new species, Koreocobitis naktongensis is described based on 9 specimens collected from the Naktong River, Korea. The new species is distinguished from Koreocobitis rotundicaudata by the following combination of characters: yellow body colouration with many brownish speckles, truncate caudal fin, fewer vertebrae, and longer head. It is remarked biogeographically that Koreocobitis naktongensis is distributed only in the Naktong River, Korea.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.15 no.1
• /
• pp.59-66
• /
• 1985

The Purpose of this study is to detect morphological changes of the maxilla following the operation of paranasal sinuses in the orthopantomogram. 1) The measurement of the angle set up by two reference lines which represent posterior aspect of the maxilla and skull base was made. 2) The mean angle in the post-operative patients showed significantly smaller than that in the normal subjects. 3) The forms of posterior aspect of maxilla were classified into 5 types. (flat, convex, concave, uneven and obliterated.) 4) In contrast with the convex type in the majority of normal subjects, approximately half of the post-operative patients showed the concave type. 5) These results may suggest that the superior part of the posterior aspect of the maxilla tend to depress following the operation of these paranasal sinuses.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.435-436
• /
• 2008

The manufacturing technology used for next generation high-speed air-breathing engines, such as ramjet engine, scramjet engine and so on, was classified and reviewed to check up if pre-occupied manufacturing technology in Hyundai Rotem and other Korean companies in the field of liquid rocket engines, gas turbines and afterburners can be applied for fabricating next generation air-breathing engines.

• Radiation Oncology Journal
• /
• v.21 no.3
• /
• pp.183-191
• /
• 2003

Purpose: To suggest the optimal radiation fields after a surgical resection based on a nationwide survey on the principles of radiotherapy for rectal cancer in the Korean Patterns on Care Study. Materials and method: A consensus committee, composed of radiation oncologists from 18 hospitals in Seoul Metropolitan area, developed a survey format to analyze radiation oncologist's treatment principles for rectal cancer after a surgical resection. The survey format included 19 questions on the principles of defining field margins, and was sent to the radiation oncologists in charge of gastrointestinal malignancies in all korean hospitals (48 hospitals). Thirty three ($69\%$) oncologists replied. On the basis of the replies and literature review, the committee developed guidelines for the optimal radiation fields nor rectal cancer Results: The following guidelines were developed: superior border between the lower tip on the L5 vertebral body and upper sacroiliac joint; inferior border $2\~3$ cm distal to the anastomosis in patient whose sphincter was saved, and $2\~3$ cm distal to the perineal scar In patients whose anal sphincter was sacrificed; anterior margin at the posterior lip of the symphysis pubis or $2\~3$ cm anterior to the vertebral body, to include the internal iliac lymph node and posterior margin $1.5\~2$ cm posterior to the anterior surface of the surface, to include the presacral space with enough margin. Comparison with the guidelines, the replies on the superior margin coincided in 23 cases ($70\%$), the inferior margin after sphincter saving surgery in 13 ($39\%$), the inferior margin after adbominoperineal resection in 32 ($97\%$), the lateral margin in 32 ($97\%$), the posterior margins in 32 ($97\%$) and the anterior margin in 16 ($45\%$). Conclusion: These recommendations should be tailored to each patient according to the clinical characteristics such as tumor location, pathological and operative findings, for the optimal treatment. The adequacy of these guidelines should be proved be following the Korean Patterns of Care Study.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.4
• /
• pp.333-340
• /
• 1990

The authors carried out a visiualizational model test by the hydrogen bubble method to examine the pattern of the fluid flow besides the simple camber type and plane type otter board in circulation water channel. The experimental conditions are velocity of flow 0.05 and 0.1m/sec, angle of attack 0$^{\circ}$~45$^{\circ}$(5$^{\circ}$step). The results obtained are as follows: 1. In the case of the simple camber type otter board located angle of attack 25$^{\circ}$, vortex at the leading edge was geneated at 1/2 of chord length. 2. Size of the vortex generated in the trailing edge was about 2~3 times larger then that of the leading edge. 3. In the case of the simple camber type otter board located angle of attack 30$^{\circ}$, separation of stream-line at leading edge was generated at 1/3 of chord length. 4. Nearest stream-line in the back side of the simple camber type otter board was bent in the direction of otter board when the angle of attack was 25$^{\circ}$ and 30$^{\circ}$, and in the case of plane type otter board was expanded outside of the flow direction. 6. Area separated of the simple camber type otter board at the angle of attack 30$^{\circ}$ was smaller then that of plane type otter board. 7. Flow speed in the back side of the simple camber type otter board was about 1.4 times faster then that in the front side, and in the case of the plane otter board about 1.2 times faster.