• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.75-83
• /
• 2001

In this paper, numerical analysis is used to find the effects of inclination of rear end on flow characteristic around an automobile. The reference slant angle of rear end is 28.6$^{\circ}$, the slant angle of rear end is decreased to 24$^{\circ}$, 26.6$^{\circ}$ and also increased to 31.6$^{\circ}$, 36.4$^{\circ}$. The 3-D incompressible Navier-Stockes equations are solved by the iterative time marching scheme. The computed surface pressure coefficients were compared with experimental results and a good agreement has been achieved. The A- and C-pillar vortex and other flow phenomena around the ground vehicle are evidently shown. The variation of aerodynamic coefficients of drag, lift with respect to inclination angle of rear end are systematically studied. The flow characteristic on the automobile surface with respect to change of inclination of rear end have been also studied.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.559-562
• /
• 2015

본 연구에서는 EDISON_CFD를 활용하여 승용차 모델을 단순화한 Ahmed Body의 후미 경사각 Slant angle $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$의 항력계수변화를 확인하였다. 결과 분석을 통해 Ahmed Body 후면의 후류와 항력계수의 변화 경향성이 같다는 것을 확인하였다. 항력계수는 자동차의 연비 및 최고속도 등 동력성능에 큰 영향을 미치므로 최저 항력계수를 찾아보았다. 각각의 경우에 EDISON_simulation 결과 값을 비교해보면 $15^{\circ}{\sim}30^{\circ}$ 사이에서 최저 항력계수를 갖는 것을 확인할 수 있었다. 정확한 값을 찾기 위해 Polynomial Curve Fitting을 사용하여 Slant angle 이 $22.91^{\circ}$일 때 최저항력계수 0.1375를 갖는 것을 확인하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.31-31
• /
• 2000

초음속 충돌제트(impinging jet)의 열 및 운동량 전달(heat and momentum transfer)은 로켓의 이ㆍ착륙, 다단 로켓의 분리, 로켓의 방향조절을 위해 배기 노즐에 부착되는 제트 베인(jet vane)이나 스포일러 탭(spoiler tab), 수직/단거리 이착륙기의 발진, 미사일 발사시스템, 전투기 동체, 날개, 후미 부분에서 발사되는 미사일의 배기가스가 주변장치 등에 충돌할 때 발생되는 문제점 등을 사전 예측하여 관련장비의 설계 둥에 유용한 자료로 이용된다. 따라서 이에 대한 기초 연구로서 초음속 유동 실험장치를 이용하여 마하수(Mach Number) 1.0 및 1.8인 경우에 대하여 수직/경사평판에서 팽창 비, 거리, 경사각에 따른 충돌 면에서의 단열 벽면온도를 측정하였다. (중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.277-286
• /
• 1989

Turbulent flows around two-dimensional vehicle-like bodies in ground proximity are numerically simulated. The Reynolds averaged Navier-Stokes equations with a k-.epsilon. turbulence model are numercally solved, and a body-fitted coordinate system is used. It is shown that the simulation is acceptable in comparison with limitted data measured in the wind-tunnel. According to numerical simulations, drag coefficients are under-estimated and lift coefficients are over-estimated during the model test in the wind-tunnel if the ground is fixed. Such ground effects are reduced as Reynolds number is increased. Reducing the gap between the vehicle and the ground make drag coefficients smaller and lift coefficients larger. The changes in static pressure distributions on the bottom and the rear surface play dominent roles in determination of the drag and the lift of the body in ground proximity. Drag component less than 10% of the total amount is contributed by skin-frictions. When the slant-angle of the body is reduced, the drag shows its minimum value and the lift shows its maximum value at about 22 degree.