• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.5 s.248
• /
• pp.465-471
• /
• 2006

Controlled auto-ignition(CAI) combustion, offers the potential to improve fuel economy and reduce emission simultaneously. In this study, CAI-combustion was achieved in a single cylinder gasoline DI engine with modified camshafts in order to restrict the gas exchange process. We investigated the effects of air-fuel ratio, residual EGR rate and injection timing such as early injection and late injection on the attainable CAI combustion region. The effect of injection timings on combustion characteristic such as start of combustion, combustion duration and heat release rate was also investigated. From the result early injection causes the mixture to ignite earlier and burn more quickly due to the exothermic reaction during the recompression and gives rise to good mixing of the fuel/air. On the other hand, late injection extended the operation region more than early injection but the emissions of HC and NOx were more or less increased than early injection.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.620-624
• /
• 2009

Biomedical metal implants have been used clinically for replacement, restoration, or improvement of injury bodies based on high mechanical properties, but it has some risks such as the inflammatory, late thrombosis, or restenosis due to the low biocompatibility and toxicity. In various techniques of surface treatment developed to preserve these drawbacks, this study examined the electrospray coating technology with biodegradable poly (lactic-co-glycoic acid) (PLGA) on metal surface. Based on fundamental examination of electrospraying and solution parameters, the surface morphology of coated film was closely related to the boiling point of solvent, in-flight distance, and droplet size. The thickness of polymer film was linearly proportional to the emerged volume. This result exhibits that the polymeric droplets were continuously deposited on the polymer film. Therefore, the electrospray coating technology might be applied into the fabrication of single/multi-layered polymer film in nano-/micro-thickness and the control of the topology for biomedical metal implants including stents.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.1
• /
• pp.1-14
• /
• 1998

Dangsanbong volcano, which is located on the coast of the western promontory of Cheju Island, occurs in such a regular pattern on the sequences which represent an excellent example of an eruptive cycle. The volcano comprises a horseshoe-shaped tuff cone and a younger nested cinder cone on the crater floor, which are overlain by a lava cap at the top of the cinder cone, and wide lava plateau in the moat between two cones and in the northern part. The volcanic sequences suggest volcanic processes that start with Surtseyan eruption, progress through Strombolian eruption and end with Hawaiian eruption, and then are followed by rock fall from sea cliff of the tuff cone and by air fall from another crater. It is thought that the eruptive environments of the tuff cone could be mainly emergent because the present cone is located on the coast, and standing body of sea water could play a great role. It is thought that the now emergent part of the tuff cone was costructed subaerially because there is no evidence of marine reworking. The emergent tuff cone is characterized by distinctive steam-explosivity that results primarily from a bulk interaction between rapidly ascending magma and external water. The sea water gets into the vent by flooding accross or through the top or breach of northern tephra cone. Dangsanbong tuff cone was constructed from Surtseyan eruption which went into with tephra finger jetting explosion in the early stage, late interspersed with continuous upruch activities, and from ultra-Surtseyan jetting explosions producting base surges in the last. When the enclosure of the vent by a long-lived tephra barrier would prevent the flooding and thus allow the vent to dry out, the phreatomagmatic activities ceased to transmit into magmatic activity of Strombolian eruption, which constructed a cinder cone on the crater floor of the tuff cone Strombolian eruption ceased when magma in the conduit gradually became depleted in gas. In the Dangsanbong volcano, the last magmatic activity was Hawaiian eruption which went into with foundation and effusion of basalt lava.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.90-119
• /
• 2019

The purpose of this study is to investigate the significance of Buddhist stone art in the cultural zone of Mt. Bukhan. Mt. Bukhan witnessed the prevalence of Buddhist culture in and around it since the introduction of Korean Buddhism and served as the center of Buddhist culture in the nation, where new Buddhist temples continued to be built from the Three Kingdoms Period to the Joseon Period. Of the characteristics of its Buddhist culture, it is very noteworthy that the construction of military temples in and around it in the latter half of Joseon supported the function of Buddhist temples as basic places of worship. These military temples were closely related to the mountain's geopolitical location, traffic routes, and position in the national defense system-- its mountain fortress was an important defense facility. The stone art works of Mt. Bukhan can be categorized into various types, including stone stupas, stone pagodas, rock-carved Buddhas, stone Buddhas, towers and monuments (stone monuments), stone lanterns, flagpole supports, and rock-carved sarira pagodas. There are diverse types of stone art left on the mountain. As for its period characteristics, it is clear that the Buddhist art of Silla spread even to the Gyeonggi region, and that most of the works of stone art were created during the first half of Goryeo and the latter half of Joseon. Starting in Goryeo, the Buddhist temples of the mountain maintained close relations with the royal court by operating as the royal buddhist shrine for the royal family. In the latter part of Joseon, the construction of the Bukhan mountain fortress became the most important opportunity to produce stone art. As for the distribution of the stone artwork, it was usually created in the west part of the mountain from Unified Silla to the first half of Goryeo and in the southern and eastern parts of the mountain from the latter half of Goryeo to the latter half of Joseon. It is estimated that central Buddhist temples of the mountain changed due to Silla's military goal of advancing toward the west coast along the Han River in its early days and the construction of the Bukhan mountain fortress in the latter half of Joseon to protect the capital city. Finally, the stone art of Mt. Bukhan holds very high significance in art history because various types of stone art continued to be created on and around the mountain, the stone artwork of the mountain reflected representative styles for each period, and e rare and ofthe works produced on the mountain exemplified rare and unique styles.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.7-14
• /
• 1981

The experiment using Anake broiler strain chicks was conducted to study the effort fungistatic agents on microbial counts, Ins of nutrient, growth rate and feed efficiency of the broiler. Feed was adjusted to 12% and 15% moisture level during hot and high humidity season and sorbic acid at the level of 0.02%, 0.04% and Ca-propionic acid at the level 0.1% 0.2% was added. The results obtained were as follows. 1, The Addition of fungistatic agents could slightly reduce mold and yeast counts. The highest effect on inhibition of mold and yeast counts was observed for the addition of sorbic acid at 0.04% level to the fled contained 15% moisture. 2, Approximately 14% starch loss of ground corn was observed from the fred contained 15% moisture and the loss could be diminished to 3-7% by the addition of fungistatic agents with the superior effect of sorbic acid to Ca-propionic acid. 3. Approximately 15% fat loss was detected when high moisture fled was und and this was reduced to 7% by the addition of 0.04% sorbic acid to the feed. 4. Significantly higher growth rate (p＜0.05) during starter period was observed for low moisture feed added by sorbic acid compared with that for high moisture diet without fungistatic agents or with Ca-propionate at the level of 0.1%. 5. Significantly lower feed efficiency (p＜0.05) during starter period of high moisture feed without fungistatic agents was observed; hower no significant different response was detected by either moisturer level of kinds and levels of fungistatic agents used. 6. Significantly higher growth rate (p＜0.05) during finisher period of lower moisture feed with 0.04% sorbic acid was observed compared with that of high moisture fled without fungistatic agents or the feed added by 0.1% Ca-propionate level. 7. Significantly higher feed efficiency (p＜0.05) during finisher period of low moisture feed added by sorbic acid 0.02% or 0.04% level was found compared with that of high moisture feed without fungistatic agents and low moisture feed added by Ca-propionate at the level of 0.1% or 0.2%. 8. Mort bacteria, mold and yeast were observed in the ceca than in small intestine. The. moisture content of dict had no effect on intestinal microfloral counts. However, numbers of mold and yeast of intestine could slightly be reduced by fungistatic agents administration. 9. Nothing but encephalomalacia to chicks fed feed contained 15% moisture without addition of fungistatic agents was observed. In conclusion, addition of either sorbid acid at 0.04% level and Ca-propionate at 0.2% level to high moisture feed or reduced moisture level to 12% could be con-sidered more effective to enhance growth rate and fled efficiency of broilers during summer period.

• Polymer(Korea)
• /
• v.34 no.2
• /
• pp.178-183
• /
• 2010

Medical metal stents inserted to patients with a cardiovascular disease associated with coronary artery system have relatively increased the survival rate. The development of new stents is, however, urgently required due to restenosis and late thrombosis generated in metal stents. To solve these problems, the biodegradable polymers such as poly(lactide-co-glycolide) (PLGA), poly(L-lactide)(PLLA), and poly ($\varepsilon$-caprolactone)(PCL) were mixed with alpha lipoic acid (ALA), which is well known to inhibit the proliferation of neointimal hyperplasia. Subsequently, the ALA-loaded polymers were coated on stainless steel by electrospray. The drug-eluting behaviors from the coated polymers were investigated according to kinds and concentrations of polymers, spray rates, and kinds of solvents. The drug-eluting rate from PCL with the lowest glass transition temperature was the fastest among three polymers and followed by PLGA and PLLA. The surface roughness increased as the spray rate was increased and also the drug-eluting rate was affected by kinds of solvents with different boiling point. It is expected that drug-eluting stent (DES) coated with ALA-loaded polymers can be applied practically for clinical applications by controlling the behavior of drug release.

• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.49-53
• /
• 2011

The present study was performed to select suitable potato (Solanum tuberosum L.) varieties for double cropping in seed production using aeroponic system, the nutrient solution was sprayed for 20 seconds in every 3 minutes, and potatoes were planted into styrofoam at a distance of 25 cm between plants. Transplantation was completed in September 9 and potatoes were harvested in November 12. The 10 trial cultivars, 'Atlantic', 'Dejima', 'Haryong', 'Hongyoung', 'Jayoung', 'Jopung', 'Jowon', 'Namsuh', 'Seohong', 'Superior' were examined for growth and yield. The shoot growth of all cultivars at the early stage was better than 'Superior', however, no difference was observed at the late stage of plant growth. In addition, 'Superior' showed a excellent root growth during the early plant growth stage, however, increased root growth was only found in 'Jayoung', 'Seohong', during the late plant growth stage. The stolon weight was greater in the order of 'Seohong'>'Superior'>'Jayoung'>'Hongyoung'. Particularly, the number of tuber in 'Jowon' was 22.4/plant that was over twice than 'Superior'(11.3/plant). As results of the current study, therefore, we concluded that four cultivars 'Seohong', 'Jayoung', 'Hongyoung', 'Jowon'were the most suitable cultivars for basic seed production using aeroponic system in Autumn potato.