• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.447-454
• /
• 2012

To examine the performance of a diagnostic X-ray system, we tested a linearity, reproducibility, and Half Value Layer(HVL). The linearity was examined 4 times of irradiation with a given condition, and we recorded a level of radiation. We then calculated the mR/mAs. And the measured value should not be more than 0.1. If the measured value was more than 0.1, we could know that the linearity was decreased. The reproducibility was analyzed 10 times of irradiations at 80kVp, 200mA, 20mAs and 120kVp, 300mA, 8mAs. The values from these analyses were integrated into CV equation, and we could get outputs. The reproducibility was good if the output was lower than 0.05. HVL was measured 3 times of irradiation without a filter, and we inserted additional HLV filters with 0, 1, 2, 4 mm of thickness. We tested the values until we get the measured value less than a half of the value measured without additional filter. We tested the linearity, the reproducibility, and HVL of 5 diagnostic X-ray generators in this facilities. The linearity of No. 1 and No. 5 generator didn't satisfy the standard for radiation safety around 300mA~400mA and 100mA~200mA, respectively. HVL of No.1 generator was not satisfied at 80kVp. The outputs were higher in the three-phase equipment than the single-phase equipment. The old generators need to maintain and exchange of components based on the these results. Then, we could contribute to getting more exact diagnosis increasing a quality of the image and decreasing an expose dose of radiation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.1
• /
• pp.153-164
• /
• 2012

Recently, as the one way of open Innovation management, Not a company's sole activity, but technology development and infrastructure buildup between companies for the synergistic effect of technological innovation, and technology transfer commercialization is needed. For a successful technology commercialization, it needs many experts like technology transfer agents, A technology transfer agent can be qualified with finishing its registration education course over 40 hours on the basis of the article 14 of law on the Promotion of Technology Transfer and the article 21 of the enforcement. After the 2010 revision of notice, the incorporated company, the Korea Technology Transfer agents has conducted the registration education. Until now, educations were conducted twice in January 2011 and November 2011. Accordingly, this study is necessary to improve the education service's quality and seek remedy through the in-depth evaluation of the present basic education service's quality. The results are as in the following. First, the service quality affect the satisfaction of the education service's quality positively. It is identified that the details of service quality of flexibility, reliability, responsiveness, conviction, and sympathy influence the education service satisfaction positively. Second, the education service satisfaction affects the attitude positively after completing the course. Third, service quality affects the attitude after completing the education course, Also it is identified that the details of service quality of flexibility, reliability, responsiveness, conviction, and sympathy influence the attitude after education completion. It is expected that this research may be used as the basic information for establishing education improvements and be helpful in establishing the technology transfer agents' registration education strategy. Through a continuous research, it is also expected that technology transfer markets are accelerated and qualified technology transfer agents are trained.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.50-60
• /
• 2014

The purpose of this study is to identify characteristics and improvements of the climate change vulnerability analysis methods to build a safe city from disasters. For this, an empirical analysis on sea level rise disasters was performed focusing on Heaundae-gu in Busan. For the analysis, Census output areas and Dongs were set as analysis unit and their disaster vulnerability was analyzed. Improvements were reviewed through the comparison and review of analysis process and results. According to analysis results, Modifiable Areal Unit Problem(MAUP) which gives different results according to aggregate unit occurs. Improvements were induced by analysis process, and it was found that in spatial unit setting stage that becomes the base of analysis, analysis unit adjustment, score computation method adjustment, and clearer analysis method for each disaster type would be needed. In analysis execution stage, it was thought that weighting according to variables, diversification of variables, and exclusion of subjective analysis selection method would be needed. It is expected that accurate the total disaster vulnerability analysis will be the base for the improvement of efficiency in urban resilience responding to future weather changes.

• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.651-658
• /
• 2018

A foot pedal switch in the diagnosis x-ray radiography system has been researched to improve radiologic technologist works and patient satisfaction. The switch has been installed in the diagnosis x-ray radiography system used in domestic clinics. Quantitative evaluation has been conducted by measuring the exposure dose reproducibility test, tube voltage, mAs, and percentage average error. Qualitative evaluation has been conducted by analysis of the radiologic technologists questionnaire. In the quantitative evaluation for the use of the foot pedal switch, the coefficient of variation was less than 0.05 in the exposure dose reproducibility test. In the mAs test, percentage average error of ${\pm}20%$ was measured. There was no problem raised since it meets the all inspection standards of the diagnosis x-ray generator. In the qualitative evaluation, most of the opinions are that it has a clinical value for the foot pedal switch in the diagnosis x-ray radiography system. Therefore, developing the foot pedal switch for the diagnosis x-ray radiography system can improve effectively the rapidity and accuracy of the radiologic technologist work. In addition, it is effective in decreasing the x-ray exposure of patients and increasing satisfaction for the medical service due to reduction of retaking x-ray.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.133-143
• /
• 2013

BIM can be utilized variously in construction management(CM) in the respect that it helps to manage comprehensively the construction information and make reliable decisions, but the adoption of BIM is insufficient in the CM area. The purpose of this study is to develop work process models and their guides in order to utilize BIM effectively in CM work at construction stage. This study defined BIM functions as 'BIM converting design', 'Model review', 'Data extraction', 'Automatic estimate', '4D simulation', 'Drawing creation', 'Engineering sector linkage analysis' through literature search, and generated CM works applicable to BIM by analyzing the CM work and process. This study developed BIM-based CM work process models by reconstructing the existing work process in connection with BIM function through an analysis on the relationship between BIM function and CM work, and reconstructing the role of each project participants. In order to improve the usefulness of the developed models, guides that described the BIM works of project participants were prepared through interviews and case studies. To validate the utilization of the models, a comparative analysis on the BIM process of precedent studies was also made and a survey was conducted on experts. This study can contribute to increasing the utilization of BIM in the CM area and can be helpful for CM companies to develop an in-house BIM guide. In the future, it will be necessary to make an assessment on the models from a business perspective through case applications and constantly update BIM-based CM work process model in consideration of the expansion of CM work due to the application of BIM.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.45-54
• /
• 2010

Recently more and more construction projects have become high-rise, complex and intelligent. Accordingly, such projects require an integrated management system for tasks, with a lean approach to construction with work processes for management and productivity. In particular, Construction Information Technology (CIT) fields are concerned with Building Information Modeling (BIM), which represents the process of generating and managing building data during its life cycle. Constructability research has progressed for the project goal which is a cost-time-quality of optimization by integrated construction knowledge and experience. However, the current constructability process has not been performed efficiently, as the existing 2D drawings and papers lack consistent and accurate information, it is difficult to share the contents of work, and the use of information is inefficient. This study proposes that the reformation and enhancement of BIM-based constructability work process can lead to brilliant performance in the framework of the construction phase through achieving collaboration between the design team and the workers at the site.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.228-232
• /
• 2006

Ontology를 이용한 분산 시각미디어 검색 프레임워크인 HERMES(The Retrieval Framework for Visual Media Service)[1][2]는 보다 정확한 시각미디어 정보를 제공하고 웹서비스(Web Services)를 적용하여 HERMES/Provider[1][2]의 자율성을 보장한다. 웹기반의 분산 환경에서 Visual Media Data에 대한 지능적인 검색을 위하여 Meta Data와 Ontology를 이용하고 이기종간 통신을 위한 웹서비스를 제공하는 HERMES/ Broker[1][2]에서 예상치 못한 문제가 발생할 경우 문제를 해결할 수 있는 방법이 제시되지 않았다. 일반적으로 웹 서비스를 제공하는 서버에서 발생되는 결함은 해당 웹 서비스를 이용하여 개발되는 어플리케이션의 갑작스런 중단이나 오류의 원인이 된다. 따라서 결함을 해결할 수 있는 대책이 필요하며 HERMES의 Broker 서버 또한 웹 서비스의 결함이 발생하더라고 이를 효과적으로 해결하여 클라이언트에게 웹 서비스를 정상적으로 제공할 수 있는 결함허용 시스템 도입이 매우 중요하다. 때문에 HERMES 프레임워크가 클라이언트에게 신뢰성과 안정성이 보장된 웹 서비스의 제공을 위해서 Broker 서버에서 발생할 수 있는 결함을 효과적으로 극복할 수 있는 메커니즘이 필요하다. 본 논문에서는 Broker 서버 에서 웹 서비스와 관련된 결함이 발생하더라고 올바르게 운영될 수 있으며 분산 이미지 검색 프레임워크인 HERMES의 구조적 특성에 적합한 결함허용 시스템 설계 기법을 제안하여 HERMES 프레임워크가 클라이언트에게 투명성 있는 서비스를 제공하고 높은 신뢰성과 안정성이 확보될 수 있도록 구성하고자 한다. Query 수행을 여러 서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.5
• /
• pp.75-85
• /
• 2008

The construction industry has been leading the growth of the nation's economy not only by providing with various infrastructure projects but also by positively impaction related industries such as crating numerous job opportunities. Relevant statistics show the production amount of construction taking about 17.5% of the GDP (Gross Domestic Product). In spite of its positive impacts on the economy, image of Korea construction industry is generally reflected as negative mainly because of its environmental disruption, low payment, bribe, fraudulent work and inefficiency. It brings students to be reluctant choosing the construction industry as their carrier path and governmental and principal research status. Therefore it has been difficult to recruit highly qualitied human resources to the industry while the morale of the whole industry has gradually become demoralized. To improve this stand, many domestic researchers carried out research projects for improving the image of Korea Construction Industry. This study also sympathizes with necessity of improving the negative image of construction industry to remain as one of the leading industry in the 21st century. Especially, this study focused on finding important factors which have significant influences on the image of the industry. Through out the research, image influence factors was identified by rigorous literature review and interviews as industrial and academic experts. Factors, then, categorized and used as the main framework for the survey which designed to fine the degree of impacts on the image of the construction industry. In analyzing the survey results, various statistical techniques was employed including factor analysis, Chi-Square-Test, Correlation Analysis and Multiple Linear Regression. Identified as the most influent factors to the image of the construction industry include morale of construction employee, and prospects the industry which of the judgement by payment, impacts on nation's economy, future of the industry, etc.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.165-172
• /
• 2012

In this study, the physical, mechanical, structural, and environmental performances based on field measured data were evaluated to check the suitability of concrete for ecological preservation and cultivation of a hydrophilic environment. More specifically, the study is focused on developing an environmentally friendly functional concrete with river ecology restoration and natural river early formation capabilities. The mechanical performance evaluation results showed that the increase in mix rate of the PVA (Poly Vinyl Alcohol) reinforcement fibers and silica fume caused an increase in the strength. The optimal mix rate was found to be 0.05 volume % PVA fiber and approximately 10% silica fume. The frost resistance evaluation showed that superior performance was gained when 0.05 volume % PVA fiber and 15% silica fume was mixed simultaneously. In the structural performance evaluation, the bending strength was improved by 47.7% compared to plain concrete when mixed with 0.05 volume % PVA fiber. The flexural toughness also saw significant improvement. The environmental monitoring of field performance showed that grasses germinated most rapidly, but the growth of red poppies, a plant that germinates in the spring, was most active with passing of time. Coverage measurements in all of the monitoring locations found favorable coverage of over 95% after 12 weeks. The study results showed that the environmentally friendly functional concrete had outstanding environmental performance.

• Journal of The Korean Association of Information Education
• /
• v.22 no.1
• /
• pp.91-102
• /
• 2018

The purpose of this study was to identify the variables that influence the intention of students to continue participating in SW education. Based on the TAM and reference to existing research on IT introduction, subjective norms, activity promotion conditions, programming related self-efficacy, perceived easy of use, and perceived usefulness were set as factors. We also tried to identify the structural causality between these factors and the intention to continue learning. The samples of this study were 204 elementary students participating in SW education. We collected our data by conducting web survey with these students for 1 month. Among the eight hypotheses set out in this study, the two hypotheses 'subjective norms will have a positive (+) effect on perceived ease of use' and 'perceived ease of use will have a positive (+) effect on Learning continuation intention' were rejected. The characteristics of the results are as follows. First, perceived ease of use indirectly influences learning intention through mediation of perceived usefulness. Second, in order to increase the intention of continuing learning, programming self-efficacy proved to be the most significant factor. The results of this study suggest that the usefulness of SW education and the programming self-efficacy of students should be improved for effective support of elementary school students' SW education.