• Convergence Security Journal
• /
• v.8 no.2
• /
• pp.95-102
• /
• 2008

In this paper, we proposed topology aggregation method that efficiently aggregating topology information in simple node topology. And, it improved QoS of networks by improving call success rate and call access time. Proposed method can improving performance of network by decreasing aggregation information and aggregating multi-links information between boundary nodes using the line segment scheme within bandwidth and delay parameter. To evaluate performance of the proposed scheme, we compare/analyze the current method with the proposed scheme in respect to call success rate, access time.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.283-285
• /
• 2003

슈퍼컴퓨터 사용자들은 FTP(File Transfer Protocol)을 이용해서 대용량의 파일을 전송한다. 전송되는 데이터들은 승용차나 비행기 설계, 의약품 개발. 기상 예보 그리고 복잡한 수학적 계산 등과 같이 다양한 분야에 걸친 연구관련 데이터로서 고성능 슈퍼컴퓨터에 의한 연산 처리가 요구된다 기존의 FTP 는 네트워크 상태에 따라 전송 지연이나 데이터 손실 등의 문제로 사용자의 불편을 초래하였다. 이에 전송 성능을 효율적으로 높이고 데이터 손실을 최소화를 제공하는 연구가 필요하다. 근래의 TCP (Transmission Control Protocol) 성능 향상 연구에 관한 연구들의 관심은 크게 두 가지이다. 하나는 윈도우 사이즈 조절(auto-tuning)이고, 다른 하나는 Multi-stream 이다. 본 연구에서는 파일 전송 성능 향상을 위한 방법으로 윈도우 사이즈 조절 방법을 사용하였고, 네트워크 상태에 따라 QoS(quality of Service)를 제공한다. 이런 성능 향상 결과로 신뢰성 있는 네트워크를 제공하여 사용자들은 신속하게 데이터를 전송하며 연산처리 결과가 더욱 정확하다고 신뢰할 수 있다. 본 고에서는 대용량 파일을 전송 할 때 성능을 향상시키는 관련 연구를 알아보고 대용량 파일 전송 중 네트워크 상태에 따라 005를 능동적으로 작용하여 테스트하고 성능을 분석하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.75-82
• /
• 2009

This paper proposes a method which increases the linearity using an improvement mechanism of Doherty power amplifier and compensates the decrement of efficiency due to improvement of linearity. To verify the method, a 20W power amplifier is designed and implemented. Compared with 2-way Doherty power amplifier, the implemented 3-way Doherty power amplifier with class F shows improved linearity about 10dBc and efficiency about 1.5%. Also, efficiency characteristic has been improved about 3.5% compared with the 2-way Doherty power amplifier while maintaining linearity. This results show that the proposed 3-way Doherty power amplifier with class F is shown to be adequate for improvement of efficiency and linearity. It is expected that the proposed amplifier can be used for various wireless communication system amplifiers.

• Spatial Information Research
• /
• v.15 no.3
• /
• pp.335-346
• /
• 2007

Road sign is one of the road attached facilities to provide conveniences to motor drivers. The setup of location information according to the related regulation and the inclusion of various attributes such as place names, route numbers, symbols, bearings, distances to the place of interest distinguish the road sign from other facilities. These features give advantages to the informationization of road sign. Presently there established about 130,000 road signs on each class of roads, and about 280 road management offices have controlled these road signs independently, but there are plethora of ineffectiveness such as the lack of consistency, recognition, connectivity, and location suitability etc. These are the major factor of confusions rather than providing conveniences, and arisen a lot of public grievances. Accordingly, in this research the road signs throughout the nation were databased and the web-GIS based road sign management system was established to ameliorate the problems reveled. Since the road sign management system we developed reflected the demands of the persons in charge and users, the management effectiveness might be enhanced and the public inconveniences will be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.372-378
• /
• 2016

A mound was constructed to install a caisson and sofa blocks underwater. The mound riprap, which were of uniform grade, size, shape, and specific gravity, formed the foundation for the support superstructure. Also, rubble leveling works were performed before installing structures such as caissons. In this study, underwater construction equipment was developed with a remotely controlled operating system and underwater environment monitoring system for unmanned underwater rubble leveling work. The performance of the developed equipment was verified using on-land and underwater tests. In addition to the performance verification, the construction process and economic efficiency of the equipment should be checked before applying it to the real construction field for commercial purposes. In this paper, a construction process using the developed equipment was proposed and compared with the existing rubble leveling method. The results demonstrated that the new construction method has higher economic efficiency and safety than the existing construction method.

• Journal of Engineering Education Research
• /
• v.10 no.3
• /
• pp.79-92
• /
• 2007

To enhance the excellence, effectiveness and economical efficiency in the learning process, we implement a hybrid educational system for engineering experiments where web-based virtual laboratory systems and distance education systems are properly integrated. In the first stage, we designed client/server distributed environment and developed web-based virtual laboratory systems for digital systems and electrical/electronic circuit experiments. The proposed virtual laboratory systems are composed of four important sessions and their management system: concept learning session, virtual experiment session, assessment session. With the aid of the management system every session is organically tied up together to achieve maximum learning efficiency. In the second stage, we have implemented efficient and cost-effective distant laboratory systems for practicing electric/electronic circuits, which can be used to eliminate the lack of reality occurred during virtual laboratory session. The use of simple and user-friendly design allows a large number of people to access our distant laboratory systems easily. Thus, self-guided advanced training is available even if a lot of expensive equipment will not be provided in the on-campus laboratories. The proposed virtual/distant laboratory systems can be used in stand-alone fashion, but to enhance learning efficiency we integrated them and developed a hybrid educational system for engineering experiments. Our hybrid education system provides the learners with interactive learning environment and a new approach for the delivery of engineering experiments.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.360-369
• /
• 2007

Since wireless sensor networks consist of nodes with the constrained battery, it is important to construct the topology performing energy-efficient routing while maximizing the whole network lifetime. Previous works related to this do not take into consideration the specific communication pattern in wireless sensor networks. In this paper, we propose a novel routing algorithm, called Up-Down Tree(UDT), which first constructs the tree topology based on distance and then adjusts the transmission range determined by the two different phases, tree setup and data gathering, to adapt the specific communication pattern in wireless sensor networks. Therefore, the UDT can improve energy efficiency, maximize the network lifetime, and block network partition Simulation results show that the UDT has the improved energy efficiency by constructing the optimal topology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2826-2832
• /
• 2012

A smart grid is an electric-power grid that employs a new information technology.This technology makes it possible to exchange real-time energy information between suppliers and consumers, finally resulting in high energy efficiency. The energy management system in smart grid provides up to date information on electricity consumption as well as dynamic electricity price to consumers of smart grid system. However, the existing energy management systems only focus on pricing system, for example, real-time electricity prices. In this paper, we try to improve the existing energy management system and propose the energy management system that mainly focuses on the efficiency of electricity consumption. In the proposed management system, PMU(Phasor Measurement Units) installed in switchboards gathers electricity data in a real time. We also propose to use data mining method, which is applied to analyzed electricity data for improving energy efficiency. Also, the proposed energy management system is designed to efficiently control the electricity between PMU and management system in case of a shortage of electricity or surplus electricity.

• Journal of Korea Multimedia Society
• /
• v.16 no.3
• /
• pp.399-409
• /
• 2013

The development of IT has led to increase the business's dependence on IT and the interests of enterprises on IT governance. Also, more enterprises have adopted managed services to save operating costs in IT departments and to maximize their business efficiency. However, until recently, there are very few academic as well as practical researches regarding managed services, IT service effectiveness, IT governance and their interrelations. This study analyzes the effects of managed services on IT governance based on the IT-BSC (Balanced Scorecard) model. Using the expert FGI (Focus Group Interview) and survey, the research results present that managed services have the most significant effect on the user-oriented and the operational efficiency in enterprises. Also, managed services through the business process standardization can improve the IT governance more effectively. This study will be a relevant guideline for enterprises that will adopt managed services.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.101-112
• /
• 2005

Recently, a curtain wall construction is a exterior finishing components which is most used for shortening time in high-rise building as well as the class of key management factors in cost and schedule control. Also, it is recognized that an effective management for curtain wall process is a major subject to accomplish the project successfully. However, as the current management for curtain wall construction is focused on the construction stage, it makes problems such as errors in business performance, rework by mistakes and duplications, errors and omissions by ineffective information management and there has never been any efficient management from a view of the entire Curtain Wall Life-cycle process. Therefore, the aim of this study is to suggest a stage check point for process improvement in the curtain wall Life-cycle process through current curtain wall process analysis, and then to investigate the cause of waste factors using the Muda method from the Toyota Production System and extract the weighted effects of the waste factors using the analytical hierarchy process method. According to the result, Most of the inefficient factors happened in architectural design stage of the entire curtain wall Life-cycle process and my research identified that detail factors of them are a delay of decision making and an approval in changes, a deficit of engineering capacity and a delay of approval in architectural design drawings by owner, etc.