• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.79-89
• /
• 2006

The purpose of this study is to propose a new method using the GPS-INS integrated system which measures the superelevation of a curved yoad rapidly and safely Also, using the CPS-INS integrated system. this Paper is to analyze the expected accuracy of the superelevation on the roads which are already opened for traffic. The superelevation of the roads which are already opened for traffic often changes by roads rehabilitation work such as resurfacing of Pavement and rutting However, it is difficult to measure 1,he changes of road geometry because or the high cost and the safety problem. If the measurement of superelevation using GPS-INS integrated system is used instead of existing conventional surveying method, the superelevation of road is expected to be measured accurately(under 0.4% RMSE) just by driving without interfering the traffic Therefore, the application of the GPS-INS integrated system is expected to be useful tool for measuring the superelevation of the roads.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.557-564
• /
• 1996

Based on stem analysis as well as branch analysis data of each tree from 8 plots of circle clear-cutting and 1 biomass plot in Changbai Mountain area, located in Northeast of China, the effective crown form of Changbai larch(Larix olgensis H.) plantation were studied by using the approach of crown curve. The results indicated that the cross-section forms of effective crown were stable and showed approximate circle for different tree size. Because the effective crown was on upper position of the canopy and its form reflects crown architecture under non-competition condition, the architecture is mainly affected by species hereditary feature. Therefore, for the specified species the effective crown form was thought to be relatively stable. The effective crown form of tree was neither related to the tree size within stand nor to the stand condition for different stand. The total effective crown curve of larch plantation could be characterized by using mean effective crown taper.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.257-264
• /
• 1989

In order to study spatial variability of soil chemical properties across the land-partitioned boundary on Hwadong silt clay loam soil (Fine clayey, mixed, mesic family of Aquic Hapludalfs) in the experimental fie ld of the wheat and Barley Research Institute in Suwon, all measured data were analyzed by means of kriging, fractile diagram, smooth frequency distribution, and autocorrelation. Sampling for soil chemical property analysis was made at 225 intersections of 15x 15 grid with 10m interval from three soil depths (0-10cm, 25-35cm, 50-60cm) in the seven patitioned fields. 1. The coefficient of variance (CV) of various chemical properties varied from 5.4 to 72.7%. Soil pH was classified into the low variation group with CV smaller than 10%, while the other chemical properties belonged to the medium variation group with C.V. between 10 and 100% 2. The approximate number of soil samples for the determination of various chemical properties with error smaller than 10% were two for pH, ten for CEC, 15 for exchangeable Ca, 32 for total nitrogen content, 39 for exchangeable Mg, 40 for exchangeable K, 61 for exchangeable Na, 82 for organic matter content, 212 for available phosphate,. 3. Smooth frequency distribution and fractile diagram showed that available phosphate was in log-normal distribution while others were in normal distribution. 4. Serial correlation analysis revaled that the soil chemical properties had spatial dependence between two nearest neighbouring grid points. Autocorrelation analysis of chemcial properties measured between the serial grid points in the direction of south to north following land-partitioned boundary showed that the zone of influence showing stationarity ranged from 20 to 50m. In the direction of east to west accross land-partitioned boundary, the autocorrelogram of many chemical properies showed peaks with the periodic interval of 30m, which were similar to the partitioned land width. This reveals that the land-partitioned boundary causes soil variability.

• Journal of Korea Water Resources Association
• /
• v.50 no.7
• /
• pp.455-465
• /
• 2017

Understanding of the two-dimensional velocity field is crucial in terms of analyzing various hydrodynamic and fluvial processes in the riverine environments. Until recently, many numerical models have played major roles of providing such velocity field instead of in-situ flow measurements, because there were limitations in instruments and methodologies suitable for efficiently measuring in the broad range of river reaches. In the last decades, however, the advent of modernized instrumentations started to revolutionize the flow measurements. Among others, acoustic Doppler current profilers (ADCPs) became very promising especially for accurately assessing streamflow discharge, and they are also able to provide the detailed velocity field very efficiently. Thus it became possible to capture the velocity field only with field observations. Since most of ADCPs measurements have been mostly conducted in the cross-sectional lines despite their capabilities, it is still required to apply appropriate interpolation methods to obtain dense velocity field as likely as results from numerical simulations. However, anisotropic nature of the meandering river channel could have brought in the difficulties for applying simple spatial interpolation methods for handling dynamic flow velocity vector, since the flow direction continuously changes over the curvature of the channel shape. Without considering anisotropic characteristics in terms of the meandering, therefore, conventional interpolation methods such as IDW and Kriging possibly lead to erroneous results, when they dealt with velocity vectors in the meandering channel. Based on the consecutive ADCP cross-sectional measurements in the meandering river channel. For this purpose, the geographic coordinate with the measured ADCP velocity was converted from the conventional Cartesian coordinate (x, y) to a curvilinear coordinate (s, n). The results from application of A-VIM showed significant improvement in accuracy as much as 41.5% in RMSE.