• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.147-154
• /
• 2004

The purpose of this paper is to improve the existing phase split algorithm considering the minimum green time in COSMOS. In the case of a signalized intersection where two wide and narrow streets intersect each other, the time required for the pedestrian crossing is frequently longer than the time alloted to the through traffic on a minor street. In order to meet the minimum green time requirement for the pedestrian less time in alloted automatically to the left-turn traffic, creating heavy congestion on the left-turn approach. To solve this problem, this study suggests a new algorithm which shares the barrier using minimum green time and shares the burden with signal phases alloted to the crossing street traffic on the basis of the equal ratio of the degree of saturation, while maintaining the minimum green time requirement. The new algorithm was compared with the existing algorithm by using a microscopic simulation model for COSMOS evaluation developed at Ajou University. The simulation results show that the new algorithm produces better performance than the existing one.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.394-401
• /
• 2002

The instantaneous flow characteristics of a round jet issuing normally into a crossflow has been studied using a flow visualization technique and particle image velocimetry. The effects of parameters such as jet inflow profile and turbulence intensity of the jet are evaluated for various Reynolds numbers in range between 735 and 3150, which are based on the crossflow velocity and jet-pipe diameter. The jet-to-crossflow velocity ratio is fixed at the value of 3.3. Instantaneous later tomographic images of the symmetry plane of the crossflow jet show that there exist very different natures in the flow structures of the near-field of the jet even though the velocity ratio is same. It is found that when the turbulence intensity of jet is elevated, the shear layer becomes much thicker due to the strong entrainment of the ambient fluid by turbulent interaction between the jet and crossflow. The detailed characteristics of instantaneous velocity and vorticity fields are presented to illustrate the effects of the above parameters on the vertical structures of the crossflow jet.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.155-158
• /
• 2005

The spray characteristics of liquid jet minted in subsonic cross-flow were investigated numerically and experimentally. The behaviors of column, penetration and breakup of plain liquid jet in non-swirling cross-flow of air have been studied. Numerical and physical models are based on a modified KIVAII code. The primary atomization is represented by a wave model based on the KH(Kelvin-Helmholtz) instability that is generated by a high interface relative velocity between the liquid and gas flows. CCD camera has been utilized in oder to capture the spray trajectory. The nozzle diameter was 0.5 mm and its L/D ratios were between 1 and 5. Numerical and experimental results indicate that the breakup point is delayed by increasing gas momentum ratio, the penetration decreases by increasing Weber number and the turbulent or nonturbulent liquid jet is obtained at different L/D ratio.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.61-64
• /
• 2008

The present study of these experiments are close examination of spray characteristics that are continuous liquid jet and modulated pressure pulse liquid jet. The experiments were conducted using water, over a range of cross-flow velocities from 42${\sim}$136 m/s, with injection frequencies of 35.7${\sim}$166.2 Hz. Between continuous cross-flow jet and pressure pulsed cross-flow jet for characteristics of penetration, breakup point, spray angle and macro spray shape are investigated experimentally. In cross-flow field, main parameter of liquid jet for breakup was cross-flow stream rather than pressure pulse frequency. As oscillation of the periodic pressure that could make liquid jet moved up and down, the mixing efficiency was increased. Also, a bulk of liquid jet puff was detected at upper field of liquid surface. So, this phenomenon has a good advantage of mixing spray from concentration of center area to outer area. Because of pressure pulsation frequency, an inclination of SMD for the structured layer was evanescent. Cross-sectional characteristics of SMD at downstream area were non-structured distributions. Then cross-sectional characteristics of SMD size were about same tendency over a range that is effect of spray mixing. The tendency of volume flux value for various frequency of pressure pulse was same distribution. And volume flux was decreased when the frequency of pressure pulse increase.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.491-495
• /
• 2009

최근 하천의 환경 생태적인 기능의 중요성이 부각됨에 따라 하도 내 설치되어있는 보와 같은 하천횡단구조물은 하천의 환경과 생태계를 해치는 대표적인 수공구조물로 인식되어 가고 있다. 하지만 일부의 경우에는 보상류에 특수한 정수형 생태계가 나타나 생태적 가치를 증가시키는 경우도 있고, 수변공간 조성에 따른 친수성 증대의 효과도 있다. 따라서 보가 하천 상 하류 생태계에 미치는 영향을 정량적으로 평가하고 분석할 필요가 있다. 본 연구는 행정중심복합도시 예정지역내에 위치한 제천유역 하류부에 보와 같은 하천횡단구조물이 존재하지 않는 구간을 선정하였고, 가상적으로 대상구간 중간에 보 설정 후 높이에 변화를 주었으며, 그에 따른 보의 상 하류 구간에서 피라미의 물리서식처 변화를 2차원 물리서식처 모의 모형인 River2D를 적용하여 분석하였다. 그 결과 보의 상 하류 구간에서 피라미의 물리서식처 변화를 모의하였으며, 피라미의 물리서식처를 고려한 최적의 보 높이를 산정할 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.83-88
• /
• 2007

The spray characteristics and liquid column penetration of steady and pulsed injection measurements have been experimentally studied using high speed camera in liquid jets injected into subsonic crossflow. The objectives of this research are to comparison the spray characteristics of steady injection with pulsed injection. Moreover. the effects of frequency are also studied. As the result, This research has been showed that pulsed injection has different penetration compared with steady injection.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.439-442
• /
• 2001

선로상에 열차의 은행에 지장을 주는 장애물들 검지하였을 때 반대편 열차에 알리거나 열차내의 긴급한 상황이 발생하였을 경우에 대비하여 열차와 지상의 사령과는 항상 열차무선을 통하여 정보를 교환한다. 초창기에 사용하는 열차무선시스템은 열차의 운행빈도나 사용자의 측면에서 아날로그방식의 음성통화로 충분한 서비스를 제공할 수 있었으나, 근래에는 고밀도의 열차운행 및 고속화로 다수의 사용자가 요구하는 서비스를 충족하기에는 많은 개량할 부분을 가지고 있다. 통신기술의 발전과 더불어 한국의 고속철도에서 사용예정인 열차무선시스템은 이러한 사용자들의 요구를 충족하기 위해 통신망의 개념을 도입하고 디지털의 TRS 시스템을 이용하여 많은 사용자의 요구를 충족하려고 노력하고 있다. 또한, 유럽에서 여러 국가를 횡단하는 고속열차의 경우 열차무선시스템에서 횡단하는 국가들간의 호환성을 극복해야하는 문제 등을 가지고 있다. 본 연구에서는 기존 VHF방식의 개량할 점과 TRS시스템의 특징 및 유럽에서 사용중인 열차무선시스템의 운영방법 등을 통하여 열차무선의 발전방향을 제시하고자한다.

• Journal of ILASS-Korea
• /
• v.23 no.1
• /
• pp.9-15
• /
• 2018

Breakup lengths of circular and elliptical liquid jets in a subsonic crossflow were experimentally studied. Two circular-shaped and four elliptical-shaped plain-orifice injectors, which had different aspect ratios and orifice length to diameter ratios, were used to provide various liquid jet conditions such as steady, cavitation, and hydraulic flip. By varying the injection pressure drop from 1 bar to 6 bar, spray images were taken using a shadowgraph technique. Breakup lengths were measured and analyzed. As the aspect ratio in orifices increased, liquid column breakup lengths normalized by the equivalent diameter were reduced irrespectively of the switching of the major or minor axis to the crossflow. It was also found that when hydraulic flip developed inside the orifice, x-directional breakup lengths more decreased for both circular and elliptical liquid jets.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.514-519
• /
• 2003

The objective of this study is to document the secondary flow and the total pressure loss distribution in the contoured endwall installed linear turbine nozzle guide vane cascade passage and to propose an appropriate contraction ratio of the contoured endwall which shows the best loss reduction among the simulated cases. In this study, three different contraction ratio of contoured endwalls have been tested. This study was performed by experimental method and when the contoured endwall has the contraction ratio of 0.17 on exit height the results showed the best loss reduction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.294-294
• /
• 2017

본 연구에서는 입력 매개변수의 변화에 따른 하천의 수리특성의 변화를 분석하기 위하여 2차원 수리해석 모형의 입력변수들에 대하여 초기 입력값의 15%~ +15% 범위로 변화시켜 해석하였다. 하도내 구조물 주변의 2차원 부정류 해석으로 각각의 매개변수의 입력값에 따라 나타나는 해석결과 최댓값들의 영향을 검토하여 하도내 2차원 분석결과에서 각각의 매개변수의 민감도를 파악하였다. 2차원 수리해석 입력자료의 민감도 분석을 위하여 수온, 밀도, 난류교환계수, 조도계수, MP(Marsh Porosity)에 대한 초기치를 기준으로 $0%{\sim}{\pm}15%$ 변화된 값을 각각 입력하여 하도내 합류부와 구조물 주변에 나타나는 2차원 수리특성 변화를 분석하고 하도구간의 종단 및 횡단에 대해서 각각 매개변수들의 결과 값에 따라 변화되는 특성을 분석하였다.