• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.220-232
• /
• 2012

In this paper, we investigate the correlation result due to the problems of delay tracking and fringe rotation module in the VCS(VLBI Correlation Subsystem). The VCS, FX-type correlator, adopts the delay tracking and fringe rotation module in order to compensate the delay change and fringe phase of wave signal from the radio source by Doppler's effect. The phase of observed data is also compensated by means of delay tracking and fringe rotation in the correlator, but we confirmed that the phase is unstable by applying long integration period of AIPS(Astronomical Image Processing System) rather than correlator. And the delay value of observed data has the errors of several tens nanoseconds than normal case at the analysis of correlation result. In addition, we found that the phase of correlation results is not connected as the unit of FFT-segment because the initial fringe phase at the fringe rotation module is not correctly determined. In this paper, in order to solve these problems, the original direction of 90 degree phase jump is reversely modified when the bit-shift occurred at the delay tracking. And the initial fringe phase at the fringe rotation module is correctly modified by using the initial phase of observed data. In addition, the parameter calculation module was abnormally operated as designed in the fringe rotation. So, the logical program by the VCS is modified so as to calculate the parameters correctly. Through the experiments of correlation processing over the above problems, the modified proposal algorithm is adequately corrected to the data analysis results, so that the experimental results make it clear for us to operate the developed VCS hardware correlator normally.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.41-43
• /
• 2014

본 논문은 전류모델과 전압모델의 장점을 취해 자속을 추정하는 고피나스(Gopinath) 모델 자속 추정기에 속도 피드백 오차가 미치는 영향에 대해 분석하였다. 속도 오차는 전류 모델의 위상 지연 및 크기 오차를 발생시키고, 이로 인해 고피나스 모델에 의해 추정 된 회전자 자속의 위상 및 크기에 오차가 발생하였다. 따라서 전류모델에 발생한 위상 지연을 통해 속도 오차를 보상하여 자속 추정 오차를 감소시키는 새로운 알고리즘을 제시하였고, 시뮬레이션 결과를 통해 검증하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.99-105
• /
• 1996

공기 베어링은 마찰과 열 발생이 적고 회전 정밀도가 우수하여 고속 회전하는 축을 지지하는 용도로 많이 사용되고 있다. 그러나 공기 베어링도 유체 베어링이라면 어느것이나 갖는 Whirl 불안정성이라는 치명적인 결점을 갖는데 현재 이것의 발생 시점이 공기 베어링을 사용하는 시스켐에 있어서 고속화의 한계로 되어있다. 본 논문에서는 불안정성의 원인이 되는 동압 발생을 억제할 수 있는 방법으로 베어링의 위치가 축의 위치에 대해 일정한 각도 지연을 갖도록 제어되는 것을 제안하고 여러 각도지연 크기와 제어게인에 따른 안정특성을 이론 해석을 통해 조사하였다.

• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.77-85
• /
• 2013

The precision of retardation measurement has been improved upto $3{\sigma}$ <0.005 nm after improvements are made to the conventional transmission ellipsometer. Improvements are made such that, i) the polarizer module instead of the sample stage is rotated, ii) the light source is replaced, iii) the starting points of two rotating modules are accurately synchronized, and iv) the fine background retardation is compensated. Together with the newly introduced RVD (Retardation Vector Difference) method, the improved instrument is successfully applied to characterize the ultra small optical birefringence of the rubbed polyimide alignment layer, after the residual retardation due to glass substrate whose magnitude is about 1.0 nm is properly subtracted. It is verified that the net retardation of the alignment layer ranges from 0.05 nm to 0.15 nm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.895-902
• /
• 2012

In this paper, we propose a novel equalizer to compensate for the group delay including AM/PM nonlinear distortion characteristics by the nonlinear power amplifier (PA). The group delay characteristic is a nonlinear non-constant time delay that appears differently depending on each frequency component. The phase distortion by AM/PM characteristics arising from the power amplifier is a major factor to increase group delay. By the group delay distortion, the signal in the constellation expands and is rotated. Considering the problem mentioned above, the nonlinear time delay that appears differently depending on each frequency component is classified as a static group delay and AM/PM characteristic of PA, the different phase transitions depending on the size of input signal as a dynamic group delay. Static group delay estimates and compensate for phase distortions in the frequency domain with type-based method and dynamic group delay compensates for phase rotation in the time domain. We confirmed that the group delay compensation techniques were enough to compensate the group delay characteristics including AM/PM characteristics of the power amplifier.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.208-211
• /
• 2003

본 논문에서는 비선형 단상부하에 의해 발생하는 전류 고조파를 보상하기 위한 단상능동전력필터의 제어방법을 제안한다. 측정된 부하전류에 시간지연을 주어 가상의 두 번째 상을 만들어서 단상시스템을 두 축을 갖는 시스템으로 만들어 복소계산이 가능하게 한다 기존의 방법과 달리 저역통과필터의 지연특성을 고려하여 필터를 통과한 지연된 위상을 가진 정현파를 가상의 상으로 이용하였다 두 개 의상이 존재하므로 순시로 무효전력을 구할 수 있게된다. 본 논문에서는 회전좌표계를 사용하여 순시계산을 하였고, 부하전류만을 검출하여 보상전류 지령치를 구하였다. RL부하에 대한 실험을 수행하였고, 이러한 실험을 통하여 제안된 제어법의 유효성을 입증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.3
• /
• pp.231-242
• /
• 2001

In this paper, we present a method to improve the torque characteristic of PMSM(Permanent Magnet Synchronous Motor) and its hardware realization. It is based on the compensation of sinusoidal current delay caused by phase winding inductances. Since coordinate transformation is not used, simple hard-wired logic in the controller design is adopted and this scheme can eliminates the delay through the coordinate transformation. The delay components are varied according to rotation speeds, but this method can also make it possible to compensate those, dynamically. The control scheme has been verified by experiments on a 4-pole 3-phase PMSM, and the generated torques are increased at whole operation speed ranges.

• Korean Journal of Optics and Photonics
• /
• v.25 no.1
• /
• pp.29-37
• /
• 2014

We have studied and demonstrated general, systematic error-correction methods for a dual rotating quarter-wave plate ellipsometer. To estimate and correct 5 systematic error sources (three offset angles and two unexpected retarder phase delays), we used 11 of the 25 Fourier components of the ellipsometry signal obtained in the absence of an optical sample. Using these 11 Fourier components, we can determine the errors from the 5 sources with nonlinear optimization methods. We found systematic errors ${\epsilon}_3$, ${\epsilon}_4$, ${\epsilon}_5$) are more sensitive to the inverted Mueller matrix than retarder phase delay errors (${\epsilon}_1$, ${\epsilon}_2$) because of their small condition numbers. To correct these systematic errors we have found that error of any variety must be less than 0.05 rad. Finally, we can use the magnitudes of these errors to correct the Mueller matrix of optical components. From our experimental ellipsometry signals, we can measure phase delay and the rotational angular position of its fast axis for a half-wave plate.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.83-85
• /
• 2000

멀티미디어 서버는 시간 제약성을 가지는 멀티미디어 데이터를 정해진 시간 이내에 디스크로부터 검색해야 하므로 디스크 검색 요청 이전에 디스크 서비스 시간을 예측하여 제한된 시간 이내에 종료된다는 것을 보장해야 한다. 리눅스는 자원의 이용률 및 시스템 성능을 향상시키기 위해서 선행 읽기와 페이지 캐쉬 등의 기법들을 사용하고 있는데 이러한 기법들의 사용으로 디스크 서비스 시간은 매우 가변적이게 된다. 본 논문에서는 리눅스 파일 시스템을 개선하여 디스크 서비스 시간의 가변성이 최소화되도록 하고 이를 기반으로 정밀한 회전 지연 시간 모델에 의한 디스크 서비스 시간의 예측 기법을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10A
• /
• pp.964-971
• /
• 2008

This paper compares the performances of cyclic delay diversity and phase rolling techniques for SC-FDE(Single Carrier with Frequency Domain Equalization) systems with multiple transmit antennas assuming time-flat and frequency-flat channels. In OFDM(Orthogonal Frequency Division Multiplexing) systems generation of time varying channels using phase rolling can result in performance gains comparable to those of frequency-selective channels made by cyclic delay diversity However, in SC-FDE systems making time-selective channels may produce better results than creation of frequency-selective channels.