• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.211-212
• /
• 2015

본 논문에서는 MRAS(Model Reference Adaptive System)을 이용한 유도 전동기의 회전자 저항을 추정하는 방법을 제안하였다. 슬립 계산은 회전자 저항 값과 연관되어 있기 때문에, 잘못된 회전자 저항 값 정보는 벡터제어의 동특성을 저하시킬 수 있다. 따라서 회전자 저항 값을 정확히 측정 또는 추정이 매우 중요하다. 본 논문에서는 회전자 자속의 크기 기반의 MRAS를 바탕으로 회전자 자속 전압 모델을 기준 모델로 구성하고 회전자 자속 전류 모델을 적응 모델로 구성하는 방법을 제안하였다. 제안한 방법은 두 모델 사이의 오차 신호를 영으로 수렴하도록 적응 메커니즘을 구성하여 회전자 저항 값을 추정한다. 본 논문에서는 시뮬레이션을 통하여 제안된 방법의 타당성을 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.714-721
• /
• 2018

In this study, we investigate a design technology intended to radically increase the buckling strength of vertically curved panels. Recent studies proposed a buckling strength formula which properly reflects the effect on the local plate buckling strength of flat plates when they are stiffened by closed section ribs. Herein, we attempted to quantitatively evaluate this effect on curved panels and to reveal the correlations with the design parameters. The commercial finite element software, ABAQUS, was used to build a three dimensional numerical model and numerical parametric studies were conducted to evaluate the variation of the buckling strength. In the case of flat panels, the local buckling strength of stiffened curved panels increases proportionally with increasing rotational stiffness of the closed-section ribs. After attaining a limiting value, an obvious tendency was found that the local buckling strength of the stiffened curved panel would converge towards a fixed value when the panels are supported along both sides. The parametric studies performed using the influential design parameters confirmed that the estimated partially-restrained curved panel strength is well correlated with the proposed formula.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.82-89
• /
• 2008

Ideal rotator cuff repair is to maintain high fixation strength and minimize gap formation for optimizing the environment of biologic healing of tendon to bone. Among the current repair techniques, the suture bridge technique is superior to single- or double-row repair in ultimate load to failure, gap formation, restoring anatomical footprint and achieving pressurized contact area. The suture bridge technique also minimizes gap formation and has rotational and torsional resistances allowing early rehabilitation. However, despite superior biomechanical characteristics of the suture bridge technique, there is no evidence that these mechanical advantages result in better clinical outcomes. Furthermore, there is no difference in failure rates between the double-row repair and suture bridge techniques. An appropriate repair technique should be determined based on tear size and pattern and tendon quality.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.2
• /
• pp.162-170
• /
• 1993

축력과 횡력을 받는 전단벽의 휨과 전단 거동을 분리산정하기 위하여 R/C 전단벽에 관한 실험 결과에 대해 System Identification을 행한다. 이를 토대로, 전단벽의 강도 저하 계수 'R'과 극한 회전능력을 구하는 실험식을 제안한다. R/C뼈대구조-전단벽에 대한 비탄성 해석 유한요소 컴퓨터 프로그램(IDARC)을 이용하여 전단벽의 지진 이력 거동을 재현한다. Identification 결과를 Digitize한 실험 결과와의 비교에 의해 검증하고, 총변형으로부터 휨과 전단에 의한 변형요소를 해석적으로 분리 함으로서 비탄성 전단 거동과 강도 저하 계수 'R'의 산정이 가능해진다. 또한 실험 결과에 대한 회귀 분석을 통하여 전단벽의 극한 회전 능력에 대한 실험식이 얻어진다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.20-20
• /
• 1998

풍력발전용 회전날개의 구조설계 요구조건은 크게 제한 강도 요구조건(Limit strength requirement), 강성도 요구조건(Stiffness requirement), 피로수명 요구조건(Fatigue life requirement)의 세 가지를 들 수 있다. 첫째로 제한 강도 요구조건은 운용기간 중에 발생할 수 있는 최대하중에 견딜 수 있어야 하며, 폭풍이나 돌풍의 상황에 대한 안전성을 의미한다. 둘째로 강성도 요구조건은 운용 중 공진을 피하기 위한 고유진동 수확보, 타워와의 충돌을 피하기 위한 변위의 제한, 공력성능의 변화를 피하기 위한 비틀림각의 제한등이 있다 셋째로 피로수명에 대한 요구조건은 요구피로수명 동안에 예상되는 반복하중에 견딜 수 있어야 한다.

• 전기의세계
• /
• v.51 no.6
• /
• pp.15-20
• /
• 2002

• 전기의세계
• /
• v.51 no.6
• /
• pp.28-34
• /
• 2002

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.617-624
• /
• 2008

Well-designed steel moment connections will undergo local buckling before they exhaust their available rotation capacity, and inelastic post-buckling deformation plays a major role in defining the connection rotation capacity. An approximate analytical method to model strength degradation and failure of beam plastic hinges due to local buckling and estimation of the seismic rotation capacity of fully restrained beam-column connections in special steel moment-resisting frames under both monotonic and cyclic loading conditions is proposed in this study. This method is based on the plastic mechanism and a yield line plastic hinge (YLPH) model whose geometry is determined using the shapes of the buckled plastic hinges observed in experiments. The proposed YLPH model was developed for the improved WUF-W and RBS connections and validated in comparison with experimental data. The effects of the beam section geometric parameters on the rotation capacity were discussed in the companion paper (parametric studies).

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.3
• /
• pp.5-14
• /
• 2017

Experimental study on strength characteristics of frozen soils is necessary for the safety evaluation of design and construction in cold region. The objective of this study is to evaluate the direct shear strength of frozen soils obtained from traditional system (Type-1), system with roller on the upper shear box (Type-2), and system with fixed upper shear box separated from bottom shear box (Type-3). Specimens mixed with sand, silt, and water are frozen to $-5^{\circ}C$, and then direct shear tests are conducted under the normal stress of 5, 10, 25, and 50 kPa. Experimental results show that the upper shear box of Type-1 touches the bottom shear box due to the rotation of the upper shear box. The shear strength obtained from Type-2 is overestimated because the preventing rotation force is added to shear force. Type-3 may acquire the only strength of the specimen, and shear strain at peak shear strength is similar to that at the beginning of vertical displacement occurrence. In addition, internal friction angle and cohesion at both peak and residual stresses in Type-3 are smaller than those of Type-2. This study shows that high strength specimens including frozen soils can be effectively evaluated using improved shear box system such as Type-3.

• Clinics in Shoulder and Elbow
• /
• v.10 no.2
• /
• pp.155-159
• /
• 2007

Arthroscopic single-row rotator cuff repair is a well established surgical technique for the treatment of rotator cuff tears. However, the problem of postoperative retear remains a concern. Various avenues are being explored to address this problem. Some studies have suggested that restoring the anatomical footprint may improve the healing and initial strength of the repaired rotator cuff tendon. The double-row technique was introduced as a method of reconstructing the anatomical footprint. According to biomechanical studies on cadavers, this technique improved mechanical strength and reduced gap formation. However, the biological properties of reattached tendon such as tension, and vascularity have not been proved yet. Furthermore, the apparent mechanical superiority of the double-row over the single-row construction has not resulted in better functional outcomes. Therefore, the less complicated and less costly single-row technique is still the recommended treatment for rotator cuff repairs.