• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.133-138
• /
• 2001

In this paper, we have investigated the drying characteristics of waste sludge in a rotary dryer equipped with disintegration device. The sludge samples($moisture\;contents\;:\;70{\sim}85%\;W.B.$) used in the experiment were mainly a soybean and an alcohol fermentation sludges in food industry, or sewage sludge. It was studied by measuring the change of moisture contents that the shaft speed($operating\;range\;:\;100{\sim}250rpm$) affected on the drying rate and the particle size distribution of the dried solid. The dried granular products of the diameter of 1 to 5mm are obtained from sludge materials. In the results, as the increased of shaft speed, the particle size and the moisture contents of dried solid was decreased, and the retention time was increased.

• Solar Energy
• /
• v.18 no.2
• /
• pp.91-104
• /
• 1998

This study carried out a numerical analysis on a heat pump assisted dryer using HFC134a. Under the constant degree of superheat and that of subcooling, we analyzed the performance of heat pump assisted dryer with varying an air mass velocity, bypass air ratio, compressor speed and an inlet bulb temperature of dryer. Simulation results were compared with experimental results, so they were maximally agreed in the range of 10%. There was the proper bypass air ratio with varying an air mass velocity. As for the effect of SMER having the inlet temperature $35^{\circ}C$ and compressor speed 1360rpm, bypass air ratio was 30% at the front velocity 0.5kg/s, 40% at the front velocity 0.7kg/s and 50% at the front velocity 0.9kg/s and 1.1kg/s. As the compressor speed was increased, SMER decreased and COP increased. As the inlet bulb temperature was increased, SMER and COP decreased.

• Journal of agriculture & life science
• /
• v.51 no.2
• /
• pp.165-173
• /
• 2017

To evaluate performance of the experimental pick-up type pulse crop harvester for harvesting sprout bean, its pick-up and discharging grain loss ratios, grain quality such as whole grain ratio, damaged grain ratio, unthreshed grain, and foreign material ratio in grain tank, germination rate of threshed grain, and theoretical field capacity of the harvester were analyzed according to engine speeds of 2000, 2400 and 2800 rpm and harvesting speeds of 0.6, 1.0 and 1.4 m/s. It is considered that the harvester showed optimum performance at the engine speed of 2800 rpm and the harvesting speed of 1.0 m/s, and then average pick-up grain loss ratio of 2.7%, discharging grain loss ratio of 0.5%, whole grain ratio of 99.3%, damaged grain ratio of 0.2%, unthreshed grain ratio of 0.0%, foreign material ratio of 0.2%, and germination rate at 8 days after seeding of 72.8% were shown. It is considered that the harvester has lower grain loss and higher grain quality than the imported bean combines. And also as it could harvest 3 rows of cut and dried sprout bean crop width of which was about 2 m, its effective field capacity was estimated for about 50 a/h.

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.18-35
• /
• 2000

The most dominant type of landslide in Korea is debris flows which mostly take place along mountain slopes during the rainy season, July to August. The landslides have been reported to begin activation when rainfall is more than 200mm within 2days. The debris flows are usually followed by translational slips which occur upper part of mountain slopes and they transit to debris flow as getting down to the valleys. Lithology, location, slope inclination, grain size distribution of soil, permeability, dry density and porosity have been proved as triggering factor causing translational slides. The triggering data taken from mapping are statistically analysed to get landslide potential quantitatively. Rock mass creeps mostly occur on well bedded sedimentary rocks in Kyeongsang Basin. Although the displacement of rock mass creep is relatively small about 1m, the creep can cause severe hazards due to relatively large volume of the involved rock mass. Examples are rock mass creep occurred in the mouth of Hwangryongsan Tunnel, in Chilgok and in Sachon in 1999. Although the direct factor of the creeps are due to slope cutting at the foot area, more attention is required A rotational slide occurring within thick soil formation or weathered rock is also closely related to bottom part of slope cutting. It is propagated circular or semi-circular type. Especially in korea, the rotational slide may be frequently occurred in Tertiary tuff area. Because they are mainly composed of volcanic ash and pyroclastic materials, well developed joints and high degree of swelling and absorption can easily cause the slide. The landslide among the Pohang-Guryongpo national road is belong to this type of slide.

• Korean Journal of Food Science and Technology
• /
• v.9 no.1
• /
• pp.68-72
• /
• 1977

Seed separation out of fresh red pepper by impact methods was effective but impossible to separate over 45% of seed. For the increase of seed separation, dehydration effect was studied with the slices of pepper. Heat deformation during the course of drying at hot air of 0. 61m/sec velocity at temperature of $65^{\circ}C$, increased the separation up to 93% with a halfcut pepper. Seed separation was remarkably different upon the location of cut, but it was completed prio tothe completion of drying in every cutting orientations. From these results a simultaneous seed separation and drying operation techniques is successfully developed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.54-59
• /
• 2002

1. 일시수확형 고추의 기계수확 요인을 구명하기 위하여 4종류의 탈과장치를 제작하여 공시고추로 탈과시험을 실시한 결과 탈과장치는 방사대칭식(브러쉬형), 고추이송(공급)속도는 0.1m/s, 탈과장치 간격은 3cm, 탈과장치 회전수는 180rpm에서 정상탈과율 77.3%, 손상률 7.6% 미탈과율 3.0%로 가장 양호한 성적이 나타났다. 2. 방사대칭식(브러쉬형) 탈과장치를 이용하여 무지용 상향착과형 고추, 지주용 하향착과형 고추, 지주용 상향착과형 고추를 공시하여 고추별 탈과시험을 실시한 결과, 고추이송(공급)속도 0.1m/s, 원통사이간격 3cm, 탈과장치 회전수 180rpm에서 가장 양호한 성적이 나왔으며, 지주용 하향착과형 고추가 정상탈과률 82.7%, 손상률 7.4%, 미탈과율 2.7%로 무지주용 상향착과형 고추(52.3%, 14.3%, 12.5%)와 지주용 상향착과형 고추(77.3%, 7.6%. 3.0%)에 비해 기계수확에 적합한 것으로 나타났다. 3. 이상의 고추 기계수확 요인시험의 결과, 탈과장치는 방사대칭식(브러쉬형) 고추종류로는 하향착과형 고추가 기계수확에 바람직한 것으로 나타났으며, 수확 후 회수가 가능한 줄기부착고추를 포함한다면 고추기계수확률은 80% 이상, 꼭지가 떨어진 것이 대부분인 손상고추도 수확 후 즉시 기계건조하여 가공용으로 사용한다고 가정한다면 기계 수확률은 90% 이상 가능하지만, 이것의 수용 여부는 좀 더 폭넓은 의견수렴 및 조사가 필요하다고 사료된다. 4. 고추수확 기계화를 위해서는 실내요인 시험 결과를 토대로 포장에서 수확메커니즘 구명과 더불어 고추 과실이 크고 무지주용 하향착과형 일시수확형 고추 품종의 개발이 병행되어야 한다고 판단된다. 5) 마늘 선별작업 -마늘선별기는 작업성능이 높고 5등급으로 균일 선별되었으며 손상도 없었으나, 기계가 크고 무거워 이동이 곤란하고 가격이 비싸므로 선별등급을 3∼4단계로 줄이고 소형 농가보급형으로 개량제작이 요구됨. 나. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음. the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.he dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.463-470
• /
• 2016

A vane shear test (VST) is a simple testing method for determining an undrained shear strength of cohesive soils by minimizing soil disturbance. In this study, the VST was used to determine a shear strength of sand. Dry Nakdong River sand was prepared for loose and dense conditions in a cell and then pressurized with 25, 50, 75 or 100 kPa from the surface of sand. A vane (5 cm in diameter and 10 cm in height) was rotated and a torque was measured within sand. When a torque moment by vane and friction resistance moment by sand is assumed to be equalized, a friction angle can be obtained. When a vane rotates within clay, a uniform undrained shear strength is assumed to be acting on cylindrical failure surface. On the other hand, when it is applied for sand, the failure shape can be assumed to be an octagonal or square column. The relationship between measured torque and resistant force along assumed failure shapes due to friction of sand was derived and the internal friction angle of sand was determined for loose and dense conditions. For the same soil condition, a series of direct shear test was carried out and compared with VST result. The friction angle from VST was between 24-42 degrees for loose sand and 33-53 degrees for dense sand. This is similar to those of direct shear tests.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.133-142
• /
• 2022

The purpose of this study is to develop an impact crusher with a radial rotating plate installed at the bottom, which is a shock absorber that can produce high-quality recycled coarse aggregate for concrete and to verify the effect of improving the quality performance of recycled coarse aggregate and its applicability through concrete tests. As a result, it showed improved quality in all items such as absolute dry density, absorption rate, abrasion resistance, Particle shape judgment rate, amount lost in the 0.08 mm sieve passing test, alkali aggregate reaction, clay mass, stability, and impurity content, and it was found to meet the criteria of recycled aggregate quality standards. In addition, the air volume and slump of concrete to which recycled coarse aggregate is applied meet all domestic standards. According to the test results of the compressive strength characteristics by age of concrete according to the mixing ratio of the recycled coarse aggregate, it was confirmed that the mixing ratio of the recycled coarse aggregate was applicable up to 60 %.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.127-149
• /
• 2003

The bridge tested was 3 spans 90m-long PSC beam concrete bridge with a stub-type abutment which had a skew of 60$^{\circ}$ about the axis of bridge. A cement concrete was placed at the superstructural slab of the bridge. Inclinometers and straingauges were installed at piles as well. During 7 days-curing of superstructural slab, the pile behavior in response to hydration heat and drying shrinkage of the slab was monitored. Then monitored values were compared with the horizontal movement obtained from the HACOM program and the calculated lateral behavior obtained from the nonlinear p-y curves of pile. As a result, lateral behavior of H-piles by the field measurement occurred due to the influence of hydration heat and drying shrinkage obtained during curing of superstructural concrete. The lateral displacements by hydration heat and drying shrinkage were 2.2mmand 1.4mm respectively. It was observed as well that the inflection point of lateral displacement of pile was shown at 1.3m down from footing base. It means that the horizontal movement of stub abutment did not behave as the fixed head condition of a pile but behave as a similar condition. The measured bending stress did not show the same behavior as the fixed head condition of pile but showed a similar condition. The increment of maximum bending stress obtained from the nonlinear p-y curves of pile was about 300(kgf/$\textrm{km}^2$) and was 2 times larger than measured values regardless of installation places of straingauges. Meanwhile, lateral load, maximum lateral displacement, maximum bending stress and maximum bending moment of pile showed a linear behavior as curing of superstructural concrete slab.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.29-38
• /
• 2010

This research was conducted to improve a hill seeding technology under puddled wet soil condition for direct seeded rice. There were severe constrains in hill sowing method under puddled wet soil such as a bird damages, dryness of seeds sown due to strong sunlight in May and buoyancy of seeds and young seedlings after raining and irrigation particular under strong wind. Thus, we have adopted a sandy type(<2mm) silicate covering method in Bokto drill seeding technology for a hill seeding method as well. The average silicate amount in order to cover seeds sown was of 840kg/ha which was evaluated to a proper volume for those problem solution and farmer's handling during sowing operation. In this experiment there was an additional problem like a precious hill drop of rice seeds, covering of silicate over hill seeded rice and seed broken during roller operation.