• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.276-276
• /
• 2019

하천에서 신뢰성 있는 유속 및 유량의 측정 자료는 수자원의 효율적인 계획과 관리를 위한 가장 기본적인 사항이다. 유속 및 유량을 측정하기 위해 지금까지는 주로 프로펠러 유속계나 초음파유속계 또는 봉부자 등을 활용해왔으며, 홍수 시에는 봉부자에 의존하고 있다. 봉부자를 이용한 유속 측정은 측정 환경이나 측정자에 따라 정확도 차이가 난다는 한계점이 있다. 뿐만 아니라 실제로 홍수가 발생했을 때는 유량이 매우 크기 때문에 교량으로 접근이 어렵고 현장으로의 접근자체가 제한될 수 있다. 위와 같은 문제들을 해결하기 위한 대안으로 비접촉식 유속 측정방법인 표면영상유속계(LSPIV, Large Scale Particla Image Velocimetry)가 있다. 표면영상유속계는 수면을 촬영한 영상을 분석하여 표면 유속을 측정하는 기법으로, 영상 촬영 장비와 분석 소프트웨어만 있으면 유속을 측정할 수 있다. 유속 및 유량 측정 결과를 보고할 때는 그 결과를 사용하는 사람이 얼마나 믿고 사용해도 좋은가에 관한 신뢰성을 판단할 수 있도록 신뢰도를 나타내는 어떤 정량적인 값인 불확도를 유량 측정 결과와 함께 제시하여야 한다. 표면영상유속계는 매우 간편하고 신속하게 하천의 유속장을 측정하는 기법이지만 측정 불확도 산정에 대한 연구가 미흡하여 정확한 측정 불확도를 제시할 수 없는 실정이다. 표면영상유속계의 불확도 인자는 바람의 영향, 입자 밀도/크기, 촬영시간 간격, 상관영역의 크기, 전단흐름/회전흐름, 참조점 측량/식별, 이동거리 산정 등이 있다. 표면영상유속계의 측정불확도를 제시하기 위해서는 각 불확도 인자에 대한 불확도를 제시하여야 한다. 따라서 본 연구에서는 Matlab을 이용하여 표면영상유속계의 불확도 요인 중 영상에서 참조점식별 시 발생하는 불확도를 분석하고자 한다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.113-122
• /
• 2016

In this study, the dispersion process of pollutant substances in a port under wave and current environments was evaluated by a hydraulic experiment. Once the contaminants washed ashore into the port of Wolseong nuclear power plant, transport processes of pollutants were investigated by tracking the tracer according to the variations of experimental condition through a hydraulic experiment. Several hydraulic experiments were performed to analyze the pollutant discharge rate of the surface coming from the different coastal environments. From the hydraulic experiment results, the tracer concentration decreased exponentially. These results suggested that, after the tracer was transported to the open sea, a different gradient was shown under different conditions. For the case of a diluted condition, the half-life of flow rate was 2.70, 10.40, and 26.39 days for 30, 20 and 10 rpm in the left-side, respectively. The decrease of the tracer concentration under conditions of 30 rpm was much faster than that under conditions of 10 rpm. For the wave condition, the half-life of flow rate was 4.59 and 15.35 days for the right and left side of the port in a hydraulic scale prototype, respectively.

• Korean Journal of Agricultural Science
• /
• v.12 no.1
• /
• pp.108-117
• /
• 1985

The process of conveying of soil with the open auger to cover the seed completly with less power was reviewed by theoretical analysis. The power efficiency, the reasonable range of RPM of the open auger and the velocity of soil conveying to the direction of the shaft are examined to establish the extent of characteristics of the open auger performance. The results of theoretical analysis and application of similitude are as follows: 1. It is possible to predict the power efficiency by the following equation; ${\eta}_p={\frac{P_n}{P_g}}=({\frac{{\omega}_s}{{\omega}_a}}){\cdot}tan{\gamma}{\frac{mg}{(F_mcos{\alpha}+F_scos{\gamma})}}$ 2. The reasonable range of the revolutions per minute of the open auger was presented as follow to cover completely with less power ; $$\frac{4d(L_a-L_i){\cdot}V_w}{{\pi}(D_o^2-D_s^2){\cdot}r{\cdot}{\frac{{\omega}_s}{{\omega}_a}}{\cdot}tan{\gamma}}{{\leq_-}}{\omega}_a{{\leq_-}}({\frac{{\omega}_a}{{\omega}_s}}){\sqrt{\frac{g}{r}}}$$ 3. The velocity of soil conveying to the direction of the auger shaft may be calculated by the equation; $V_h=({\frac{{\omega}_s}{{\omega}_s}})V_a{\cdot}tan{\gamma}$ 4. The factor of RPM was more important than other factors on the power efficiency.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.5
• /
• pp.622-630
• /
• 1998

Rotating Biological Contactor (RBC) was tested for the removal of total ammonia nitrogen (TAN) by using simulated aquaculture system. RBC performance was evaluated by controlling revolution rate of disk and hydraulic residence tile (HRT). The optimum revolution rate of disk was 4 rpm, As HRT of RBC was increased, TAN removal efficiency of RBC and TAN concentration of rearing water were increased. HRT for maintaining lowest TAN concentration of rearing water was 9.5 minutes and at that condition TAN concentration of rearing tank was $1.03 g/m^3$

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.255-263
• /
• 2006

Objectives: This article reported three patients developed anterior open bite seemed to be related to TMJ anterior disc dislocation without reduction(ADD WO R), but no evidence of condylar destructive or collapse and analyzed the craniofacial skeletal structure by means of cephalometric analysis. Results: All patients suddenly developed a centric relation/centric occlusion discrepancy, an increased overjet and an anterior open bite following ADD WO R. All patients had Angle's Class I occlusion and shallow bite, but they had skeletally Class III and Class II pattern and all were vertically significant hyperdivergent type. Conclusions: These 3 patients had characteristics of common facial morphology including:(1)Angle classification Class I and shallow bite,(2)high mandibular plane angle,(3)high gonial angle. Developed anterior open bite resulted from clockwise rotation of the mandible related TMJ ADD WO R, rather than a result from the eruption of posterior teeth. We hypothesize rotation may relate to attached direction of masticatory muscle.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.621-627
• /
• 1994

Two crystal structures of dehydrated, $Ag^{+}$ and $Ca^{2+}$-exchanged zeolite A treated at $250^{\circ}C$ with 0.15 torr of Cs vapor have been determined by single-crystal X-ray diffraction technique in the cubic space group $Pm{\bar\3m$ at $21(1)^{\circ}C$ (a = 12.344(2) $\AA$ and 12.304(2) $\AA$). Their structures were refined to the final error indices, R (weighted), of 0.091 with 180 reflections, and 0.093 with 179 reflections, respectively, for which I > $3\sigma(I).$ In each structure, Cs species are found at four different crystallographic sites: 3 $Cs^{+}$ ions per unit cell are located at 8-ring centers, ca. 6.81∼7.14 $Cs^{+}$ ions are found on opposite 6-rings on threefold axes in the large cavity, ca. 1.93∼2.03 $Cs^{+}$ ions are found on threefold axes in the sodalite unit, and 0.53∼0.66 $Cs^{+}$ ions lie on opposite 4-rings. Also, ca. 4.12∼4.27 Ag atoms are located near the center of the large cavity. In these structures, excess cesium atoms in a unit cell are associated with other $Cs^{+}$ ions on a single threefold axis to form the linear cationic cluster $(Cs_4)^{3+}$. By blocking 8-rings, the $Cs^{+}$ ions may have prevented silver atoms from migrating out of the structure. The Ag atoms are likely to have formed hexasilver clusters at the centers of the large cavities. Each hexasilver cluster is stabilized by coordination to 14 $Cs^{+}$ ions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.108-116
• /
• 1997

A laboratory experiment was made of critical transition flow modes in Czocllralski convection. Numerical computation was also made to delineate the dynamic transition. The period of temperature oscillation ($t_p$) and the interval of temperature oscillation ($\Delta\theta$) were scrutinized to capture the critical transition regime. The mixed convection parameter was varied in the range of $0.134\le Ra/PrRe^2 \le3.804$. The data from calculation were in good agreement with ones from experiment. The influence of the Prandtl number on the transition was examined for Pr ＝ 910, 4445 and 8889. To understand the transition mechanism, the detailed temperature oscillation modes, the isolines of meridional temperature and the axial velocity profiles were investigated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1462-1466
• /
• 2009

우리나라 가뭄의 지역적 특성은 수문학적으로 동질한 지역의 구분 결과에 따라 달라진다. 지역의 구분에는 가뭄에 영향을 미치는 다양한 변수들이 사용될 수 있다. 가뭄을 특징짓는 요소로서 지속기간, 심도, 이외의 통계적 특성들이 있으며, 이 변수들을 정보화하여 변수의 유형을 구분지어 모든 변수들을 요약된 정보로 활용하여 가뭄의 특성을 구분할 수 있다. 본 연구에서는 우리나라 기상청 강우자료 75개 관측지점 중 30년 미만의 강우기록이 있는 17개의 지점을 제외한 58개 강우 관측 지점을 대상으로 가뭄지수(SPI)를 산정하여 가뭄사상의 특성을 정량화 과정으로 남한지역 가뭄특성을 분류하였다. SPSS를 활용한 다변량 분석기법인 주성분 분석(principal component analysis)을 통해 가뭄특성인자의 상관관계가 높은 변수들을 조합하여 그 변수들 중 가뭄정보를 가능한 많이 함축하고 있는 새로운 특성 변수를 만들어 내었으며, 선정된 변수들을 바탕으로 요인분석(factor analysis)의 직각회전 방식(Varimax)을 이용하여 변수들의 표준화를 통해 가뭄특성요인을 찾아내었다. 이를 통해 지역간 동질성을 파악하여 K-means기법을 적용하여 군집해석(clustering analysis)을 실시하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1063-1069
• /
• 2011

Today, tire performance becomes better as vehicle performance increases. Driviability, endurance, comfortability, noise, and antiwear performance is influenced by tire contour. Tire design method is developed by high-tech engineering technology. Among theses studies, tire performance improvement through tire contour optimization is performed by many vehicle investigator. Therefore, in the present study, an optimum contour design system satisfying the tire performance requirements is constructed by regression analysis and genetic algorithm by using design of experiments.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.521-524
• /
• 2009

This study describes aerodynamic noise of high speed wind turbine system, which is invented as a new concept in order to reduce the torque of main shaft, for design parameters of the rotor blade. For parametric study of high speed rotor aerodynamic noise, Unsteady Vortex Lattice Method with Nonlinear Vortex Correction Method is used for analysis of wind turbine blade aerodynamic and Farassat1A and Semi-Empirical are used for low frequency noise and airfoil self noise. Parameters are chord length, twist and rotational speed for this parametric research. In the low frequency range, the change of noise is predicted the same level as each parameters varies. However, in case of broadband noise of blade, the change of rotational speed makes more variation of noise than other parameters. When the geometric angles of attack are fixed, as the rotational speed is increased by 5RPM, the noise level is increased by 4dB.