• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.113-120
• /
• 2021

An experimental device was designed to control the opening of a damper via operating the folding blade drive of the device and to control the amount of air flowing through the damper. In addition, an inverter was installed in the blower to control its fan rotation speed and hence the amount of air flowing through the damper. An experimental study was conducted on the opening of the folding blade damper and changes in the rotational speed of the blower. From the results, the theoretical air volume of the folding blade damper and experimental air volume were observed to be in good agreement within an error range of ±3%. As the mass flow rate of the air passing through the folding blade damper increases proportionally with the changes in damper opening and fan rotation speed, the performance of the damper can be controlled proportionally. The mass flow rate was also observed to increase linearly; therefore, the mass flow rate of the air passing through the folding blade damper increases proportionally with changes in the rotation speed of the blower, such that the performance of the damper is proportional to a constant air volume even with varying rotation speeds of the blower.

• Journal of Korean Library and Information Science Society
• /
• v.54 no.4
• /
• pp.1-24
• /
• 2023

In a situation with reducing numbers of students and local universities in crisis, this study aims to analyze collection and loan usage data in small-sized university libraries and present evidence for guiding their collection development policy. The data was collected from Rinfo from 2010 to 2022 regarding the numbers of enrolled students, collected books, book loans, and electronic resources and compared the average values of entire 4-year university libraries to those of small-sized ones by year and region. Results show that while the numbers of enrolled students and book loans have decreased in both of groups, the number of collected books has increased 30% more in small groups and the amount of electronic resource use has increased enormously as well. Correlation analysis presents that both of groups have the consistent result. It is suggested that small-sized university libraries should highly increase their budget ratio to electronic resources for collection development and build a consortium by university's speciality for mutual use of electronic resources.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.47-53
• /
• 2003

In this paper, we described the laboratory layout of the optical CT in connection with the measurement of large current based on Magneto-Optic Effects. It was used He-Ne laser for light source and was used PIN-Photodiode for light receiver. The sensing section was organized by winding optical fiber around conductor on the concept that the rotation angle of polarizing axis by Faraday Effect is proportional to the applied current in to conduction. The optical signal passed through optical fiber sensor was induced to analyzer arranged in the direction of $\theta$ for input polarization, and then analyzed its rotation angle and researched on operating characteristics of optical CT for 60[Hz] AC current measurement from l00[A] to 1000[A] was carried out. In this results, the output signals induced linearly with the current and proved that the intensity is increased with increasing turns of fiber through output differences which in accordance with turns of fiber and we verified that there is not only difference of the output with the medium between electric field and optical fiber, but also the lineality. Measuring the references and output intensities of the optical CT, ratio errors were within $\pm$7%. This confirmed that error rate will be improved by each medium and turns.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.453-467
• /
• 2018

The excavation performance and the cutting tool wear prediction of shield TBM are very important issues for design and construction in TBM tunneling. For hard-rock TBMs, CSM and NTNU model have been widely used for prediction of disc cutter wear and penetration rate. But in case of soft-ground TBMs, the wear evaluation and the excavation performance have not been studied in details due to the complexity of the ground behavior and therefore few testing methods have been proposed. In this study, a new soil abrasion and penetration tester (SAPT) that simulates EPB TBM excavation process is introduced which overcomes the drawbacks of the previously developed soil abrasivity testers. Parametric tests for penetration rate, foam mixing ratio, foam concentration were conducted to evaluate influential parameters affecting TBM excavation and also ripper wear was measured in laboratory. The results of artificial soil specimen composed of 70% illite and 30% silica sand showed TBM additives such as foam play a key role in terms of excavation and tool wear.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.31-36
• /
• 1995

비유선형의 물체 주위의 유동은 정체유동, 경계층 박리 및 주기적 와열 생성 등의 복잡한 유동현상이 공존한다. 본 연구에서는 비교적 단순한 형상인 정사각주 주위의 비정상 난류 유동을 2-방정식 와점성 난류모델인 표준 $k-{\varepsilon}$ 모델과 RNG $k-{\varepsilon}$ 모델을 이용하여 예측할 수 있는지를 검증하였다. 정교하게 수행된 최근의 실험과 대와류모사(LES)의 결과를 검증을 위한 비교의 자료로 삼았다. 적절한 난류모델의 선정과 더불어 시간 정확도, 공간 정확도 및 대류항 처리법 등이 해석결과에 미치는 영향도 살펴보았다. 기존의 표준 $k-{\varepsilon}$모델은 정체점 부근에서 난류 운동에너지를 과도하게 생성하는 근본적인 문제점 때문에 실험 및 LES의 결과를 제대로 예측할 수 없었다. 난류운동에너지의 초과 예측에 따른 운동량의 과도한 혼합으로 인해, 항력계수 및 양력계수의 비정상성 뿐 아니라 평균 항력계수도 부정확하게 예측하였다. RNG $k-{\varepsilon}$ 모델을 사용한 경우에는 정체점 주위 유동현상의 예측이 상당히 향상되어 항력계수 및 양력계수의 평균치, 진폭 및 비정상성의 주기 등을 정확하게 예측하는 것이 가능하였다. 그러나 이 경우에도 예측의 정확도가 시간 증분과 격자의 크기 및 대류항 처리법등에 영향을 받으며, 특별히 대류항 처리법에 상당히 민감하게 변하는 것을 알 수 있었다. 향상된 유동예측은 RNG $k-{\varepsilon}$ 모델의 난류에너지 소산율 방정식의 개선된 항이 과도하게 생성된 난류에너지를 정체점 부근에서 제거하기 때문에 가능하다는 것을 알 수 있었다.의 20세 이하 골절 및 탈구가$30.3\%까지 감소하게되어 년도가 증가함에 따라 청장년 층에 비하여 소아골절 및 탈구가 전체적으로 감소하는 경향을 보였다. 스키골절의 부위별 발생빈도는 1990년 이전까지 하지골절 및 탈구가 많았으나 이후 점차 상지의 골절 탈구가 증가하였다 하지에서 가장 많은 골절은 경골 골절이었으며, 경골골절은 회전력에 의한 나선형골절이 $76.5\%로 가장 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여 감염의 위험성을 증가시키지 않으면서 영구적인 신경학적 합병증을 일으키지 않았고 좋은 혈관 개존율을 보여주었다. 따라서 동맥 도관을 이용한 Off pump CABG는 관상동맥의 협착의 정도에 따라 효율적으로 시행

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.187-195
• /
• 2013

Most of former studies for car license plate detection restrict the image acquisition environment. The aim of this research is to diminish the restrictions by proposing a new method of using SIFT and neural network. SIFT can be used in diverse situations with less restriction because it provides size- and rotation-invariance and large discriminating power. SIFT extracted from the license plate image is divided into the internal(inside class) and the external(outside class) ones and the classifier is trained using them. In the proposed method, by just putting the various types of license plates, the trained neural network classifier can process all of the types. Although the classification performance is not high, the inside class appears densely over the plate region and sparsely over the non-plate regions. These characteristics create a local feature map, from which we can identify the location with the global maximum value as a candidate of license plate region. We collected image database with much less restriction than the conventional researches. The experiment and evaluation were done using this database. In terms of classification accuracy of SIFT keypoints, the correct recognition rate was 97.1%. The precision rate was 62.0% and recall rate was 50.2%. In terms of license plate detection rate, the correct recognition rate was 98.6%.

• Journal of Plant Biology
• /
• v.35 no.4
• /
• pp.323-332
• /
• 1992

Chlorophyll-a concentrations of phytoplankton and primary productivities in closed marine ecosystem, Inchon Dock, were measured and analyzed monthly from August, 1990 to December, 1991. Chlorophyll-a concentrations ranged from 1.61 to $28.67\;\mu\textrm{g}\;Chi-a/I$, where nanoplankton ($2-20\;\mu\textrm{m}$) fractions contributed in 19.0-82.3% and picoplankton ($0.2-2\;\mu\textrm{m}$) fractions in 4.5-51.4%. Primary productivities measured by $^{14}C$ method ranged from 49.4 to $4359.4\;mg\;C{\cdot}m^{-2}{\cdot}day^{-I}$, where nanoplankton ($20\;\mu\textrm{m}$) contributed in 18.8-94.6%. These results implied that very tiny cell-sized phytoplankton populations were important in point of chlorophyll-a concentration and primary productivity of phytoplankton community. In monthly variations of chlorophyll-a concentration by phytoplankton, the first peak occurred in March and the second in August. Nitrogen requirement by phytoplankton ranged from 0.7 to $60.7\;mg\;at-N{\cdot}m^{-2}{\cdot}day^{-I}$ and the turnover time of inorganic nitrogen showed maximum during winter and minimum in summer. Carbon assimilation number increased in summer and decreased in winter.winter.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.150-154
• /
• 2017

A self-propelled turner was developed to produce mushroom compost at low costs and high efficiency, and the uniformity of compost produced by an excavator, compost mixer, and self-propelled turner was compared. The material of the compost was mixed with rice straw and chicken manure at a dry weight ratio of 3:1. After the final turning, internal temperature distribution, water content of the compost pile, ash ratio, and uniformity of the compost pile were examined. After the compost was completed, the water content was $69.9{\pm}0.54%$, $72.1{\pm}0.15%$, and $74.5{\pm}0.82%$, respectively. The length of rice straw was $47.5{\pm}15.4cm$, $24.9{\pm}10.1cm$, and $31.0{\pm}10.6cm$, respectively. The ash content in the dry weight of each compost was $25.0{\pm}6.2%$, $33.6{\pm}4.2%$, and $28.2{\pm}1.1%$, respectively. The deviation in the length of rice straw was affected by the linear velocity of the spinner in the compost mixer and the self-propelled turner, which were 21.5 m/sec and 9 m/sec, respectively. As a result, the most uniform mushroom compost was produced by the self-propelled turner.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.21-29
• /
• 2005

The HANARO, a multi-purpose research reactor of 30 MWth open-tank-in-pool type, has been under normal operation since its initial criticality in February, 1995. Recently, ten years after the initial operation of the HANARO, one of the two primary cooling pumps was decontaminated for overhaul maintenance in 2004. Before decontamination exposure doserate and surface contamination level of primary cooling pump measured at 4 points. After final decontamination exposure doserate and surface contamination level of primary cooling pump remeasured by same method done before. It is easy to decontaminate the out side exposed surfaces of the pump, but it is difficult to approach the inside surface due to double volute installed in the casing. Therefore, a new decontamination facility has been developed to solve this problem. A concentrated de-contaminant (DX-300) is rotated in the closed pump casing by the impeller actuated by a temporary motor. Nuclide particles are removed by the emulsification effect of the de-contaminant and the surface contaminants are chemically removed from the pump by the corrosion and dissolution effect. The inside surfaces of the primary cooling pump have been decontaminated by using the facility. As results, the contamination level of the inside surfaces was maintained below the surface contamination limit.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.7-14
• /
• 2013

This study investigated the optimum condition of abrasion peeling machine and pellicle peeling ability of chestnut (Castanea spp.) varieties for the efficient production of peeled chestnuts. The optimum conditions were 50 minutes peeling time and 27 rpm of drum rotation speed and chestnut pellicle peeling ratio was 89.3%. Among 8 Korean chestnut varieties which were peeled under the optimum condition (27 rpm/50 min), 'Tsukuba (89.3%)', 'Tanzawa (72.2%)' and 'Ishizuchi (70.9%)' showed the highest ratio of pellicle peeling ratio. 'Tsukuba' had the most excellent peeled (grade I) chestnuts (77.3%), followed by 'Ishizuchi (46.7%)', and 'Tanzawa (45.0%)'. Regarding the chestnuts quality for commercialization, 'Tsukuba' had the most excellent peeled chestnuts (90.5%), followed by 'Tanzawa (74.8%)', and 'Ishizuchi (74.3%)'. 'Mipung (37.2%)' had the most broken and injured chestnuts and 'Tsukuba (5.9%)' had the least broken and injured chestnuts. Therefore this study concluded that 'Tsukuba' was the superior variety for producing high value-added processed chestnuts.