• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.132-139
• /
• 1992

This paper presents geometrically nonlinear formulation of shell problems using the three-dimensional curved shell element, which includs large displacements and large rotations. Formulations of the geometrically nonlinear problems can be derived in a variety of ways, but most of them have been obtained by assuming that nodal rotations are small. Hence, the tangent stiffness matrix is derived under the assumptions that rotational increments are infinitesimal and the effect of finite rotational increments have to be considered during the equilibrium iterations. To study the large displacement and large rotation problems, the restrictions are removed and the formulations of the curved shell element including the effect of large rotational increments are developed in this paper. The displacement based finite element method using this improved formulation are applied to the analyses of the geometrically nonlinear behaviors of the single and double curved shells, which are compared with the results by others.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.107-113
• /
• 2018

The purpose of this study was to evaluate the dose and image quality according to the rotation of the X-axis direction in the abdominal CT scan, and to find ways to reduce the exposure dose. The phantom was scanned by rotating in the X-axis direction at 0, 5, 10, and 15 degrees, respectively. The CTDIvol value, HU, noise, and signal-to-noise ratio were measured at each rotation. ANOVA analysis was performed using the SPSSWIN (ver 19.0) program. The radiation exposure dose was 5.44mGy, 5.70mGy, 5.98mGy and 6.38mGy at 0, 5, 10 and 15 degrees, respectively. HU, noise, and signal-to-noise ratio were not statistically significant. In the CT scan, if the patient is located in the isocenter of the gantry aperture and there is no rotation in the X-axis direction, the exposure dose is reduced.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.353-355
• /
• 2002

지금까지 회전운동을 선형운동으로 만들기 위해 많은 연구가 되어 실제장치의 특허는 1980년대부터 볼 수 있으나 분명한 이론적 근거가 없었다. 회전운동을 선형운동으로 만들기 위한 방법 중 한 가지를 소개한다. 회전중심의 팔에 관성질량이 달려 있으면 회전중심으로 회전 중 각 가속도를 강제로 제어발생시 작용 반작용에 의해서 관성질량에 순간 질량중심이 발생한다. 그 결과 계 전체의 질량중심에 순간회전 변위가 발생한다. 계의 질량중심의 회전변위를 한 방향이 되도록 각가속도를 적절히 제어하면 선형 선형적인 펄스 운동을 얻을 수 있다. 기존 실제 장치들의 운동특성을 참조하여 회전중심 과 순간질량 중심 및 계의 질량중심 관계의 모델을 세우고 수식 및 이론을 정의하여 해석한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.556-558
• /
• 2000

본 논문은 지문 특징점 들에서 서로 연결되어진 구조 정보를 활용한 지문 매칭 알고리즘에 대해 연구하였다. 매칭에 이용한 특징은 분기점, 단점 그리고 융선의 방향 등이다. 한 융선 위에 존재하는 여러 특징점들의 연결정보를 찾고, 이를 저장하여 기준좌표축(한쌍의 특징)을 검출한다. 서로 일치하는 한 쌍의 특징을 이용해 입력지문을 이동하고 회전하여 원본지문과 일치시킨 후 각 특징들의 위치, 융선 방향이 일치하는 개수에 따라 지문의 동일여부를 판단하였다. 제안된 알고리즘은 회전과 이동에 무관한 지문인식이 가능하며, 처리 속도가 빨라 실시간 지문인식에 적용할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.243-250
• /
• 2012

In this paper, a systematic consequence of evaluation method, procedure, and flight data analysis is investigated for application of ADS-33E-PRF to UAV. And it is applied to unmanned rotorcraft for evaluation. CNUHELI-020, which is developed in Chungnam National University, is used for assessment of handling quality: decoupled longitudinal and lateral/directional model were used to assess handling qualities. Evaluation flight maneuvers are categorized as hover/low-speed requirements, small-amplitude attitude change, and moderate-amplitude attitude change requirements.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.505-506
• /
• 2023

본 논문은 임베디드시스템을 적용한 대용량 고부하 레이다 플랫폼의 구동 제어 방안을 제안한다. 군사적 방어 목적용 지대공 유도 미사일 시스템의 구성품인 다기능 레이다 시스템은 고중량의 안테나를 구동해야하는 대용량 고부하 레이다 구동 플랫폼이 필수이다. 이 다기능 레이다 시스템은 360도 방위각 전방향을 일정한 속도로 방위각 회전하며 감시정찰 및 방어 임무를 수행한다. 여기서 대부하 레이다 구동 플랫폼은 방위각회전 구동장치를 이용하여 일정한 속도로 360도 방위각 방향으로 안정적인 회전을 가능하도록 구동 제어한다. 본 구동 제어를 실시간으로 구현하기 위해 임베디드시스템인 DSP(Digital Signal Processor)가 포함된 제어모듈은 구동모듈에 회전구동 명령을 인가하여 일정한 회전각속도로 구동하도록 회전구동 모터를 실시간 제어한다. 고부하 레이다 플랫폼은 직구동모터타입의 회전구동모터, 회전체에 신호와 전원을 공급하기 위한 회전슬립링, 회전체의 회전각도를 측정하기 위한 회전센서로 구성된 방위각회전구동장치와 전체 전원을 공급받아 사용 목적에 맞게 변환하여 공급하는 전원모듈, 구동모터에 구동전원을 공급하기 위한 구동모듈, 회전구동 명령에 따라 구동제어하기 위한 제어모듈로 구성된 제어장치로 구분된다. 본 논문에서는 대부하 레이다 구동 플랫폼을 시뮬레이션 모델링으로 구현하고 제안하는 구동 제어 방안은 구동제어시뮬레이션으로 검증한다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.441-447
• /
• 2013

Purpose: The present study was conducted to investigate the axial rotations of toric soft lens during the change of lens wearer's posture, and the relationship between its rotation and corneal astigmatism. Methods: The amount, direction, and speed of toric soft contact lens rotation were measured for 42 eyes (aged 20s) with the rule astigmatism in the straight and lying postures, and it compared between their changes according to corneal astigmatism. Results: There was no significant difference in the axial rotation of lens for the astigmatism prescription between the straight and lying postures. However, the rotation angle was significantly different according to the posture of lens wearer. Rotating directions in straight posture were nasal direction for 20 eyes and temporal direction for 22 eyes. In lying posture, lenses of most wearers were rotated to a direction of lying posture, and the initial rotating speed was very fast in initial wearing for -0.75 D toric lenses, but consistency for -1.25 D toric lenses. The rotation angle in lying posture showed significantly different according to the amount of corneal astigmatism, the lens speed was also significantly different according to the wearing time but not the amount of corneal astigmatism. Conclusions: The axial rotation of toric soft lens was different by the lens wearer's posture and its amount was the greater with the higher degree of corneal astigmatism. Thus, these factors should be considered for the development of toric lens design.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.36-43
• /
• 2004

In this paper, the frequency spectra from respective mechanical noise signals detected using ultrasonic wave and AE(Acoustic Emission) sensor were analysed to under spark generation between brush and commutator side with arbitrarily 15$^{\circ}$ rotation for brush from the DC motor in operation. Also, the frequency spectra from respective magnetizing noise signals detected using ultrasonic wave and AE sensor were analysed to under neutral point for brush from the DC motor in normal operation. And the analyses and comparison between the mechanical noise signal and magnetizing noise signal of ultrasonic wave with brush location change from the DC motor in operation. As the experimental results, tile mechanical noise signal of ultrasonic wave under spark generation between brush and commutator side with brush location change from the DC motor in operation were increased about 2.5∼3.0 times than magnetizing noise signal of ultrasonic wave form the DC motor in normal operation. Also, the main frequency band for mechanical noise signals of AE under spark generation between brush and commutator side with brush location change from the DC motor in operation, appeared about 1.3[MHz]∼l.5[MHz] by the fast fourier transform.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.1
• /
• pp.60-66
• /
• 2002

In this paper, an efficient content-based rotation-invariant retrieval of the trademarks is proposed using the edge-direction histogram for a principal symmetry axis and the moment invariants. Rotation invariant retrieval of trademarks is difficult for the conventional retrieval systems because their feature vectors are not rotation-invariant. In this paper, to obtain rotation invariant feature vectors, in addition to invariant moments, the edge-direction histogram for a principal symmetry axis is introduced and is used to solve the bin shift problem of the histogram resulted from the rotated trademark. Performance evaluation has been carried out for a database of 300 kinds of trademarks including 20 kinds of typical trademarks which are reported to be difficult to retrieve when rotated, and the proposed scheme is proved to retrieve trademarks more efficiently, especially for the rotated trademarks, than the conventional methods.

• Journal of the Korean Society of Visualization
• /
• v.9 no.1
• /
• pp.49-54
• /
• 2011

An investigation has been made of a viscous incompressible flow in a circular cylindrical tank. The flow is driven by the spinning bottom disk of tank together with/without central injection and radial uniform-ejection through the sidewall. Numerical solutions of steady and unsteady flows to 3-dimensional Navier-Stokes equation were obtained for several cases of injection strength. In a moderate flow rate of injection, the mass transfer occurs through the boundary layers but, as the flow rate increases, the inner region far from the container walls takes part in mass transfer.