• 제목/요약/키워드: 회생 에너지

검색결과 177건 처리시간 0.024초

연비와 충전 횟수를 고려한 회생제동 알고리즘 연구 (A Research on the Regenerative Braking Algorithm considering Fuel Economy and Charging Oftenness)

  • 양호림;전순일;박영일;이장무
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.370-373
    • /
    • 2005
  • In this research, we presented the regenerative braking algorithms considering fuel economy and charging oftenness, and also analyzed these algorithms. The first algorithm was the regenerative braking algorithm for the ideal recovery of kinetic energy. The HEV using this algorithm had high fuel economy, on the other hand frequent charging was occurred. The second algorithm was the regenerative braking algorithm for reduction of the charging oftenness. Using this algorithm, the HEV had the low charging oftenness and small loss of fuel economy.

  • PDF

유압 축압기식 제동에너지 회생시스템을 장착한 정유압구동식 차량의 모의시험기 개발 (Development of a Simulator of Vehicle Equipped with Hydrostatic Transmission and Hydraulic Accumulator Type-Braking Energy Regeneration System)

  • 이성래
    • 한국자동차공학회논문집
    • /
    • 제11권5호
    • /
    • pp.119-126
    • /
    • 2003
  • The simulator of a vehicle equipped with hydrostatic transmission and hydraulic accumulator type-braking energy regeneration system is developed using a PC. The simulator receives the accelerator pedal angle and the brake pedal angle generated by the operator using the keyboard, updates the state variables of the energy regeneration system responding to the input signals, and draws the moving pictures of the accumulator piston, pump plate angle and pump/motor plate angle every drawing time on the PC monitor. Also, the operator can observe the accel pedal angle, brake pedal angle, pressures of accumulators, vehicle speed, hydraulic torque, engine torque and air brake torque representing the operation of braking energy regeneration system through the PC monitor every drawing time. The simulator can be a very useful tool to design and improve the braking energy regeneration system.

자기 에너지 회생 스위치를 이용한 3상 유도전동기의 역률개선 (Power Factor Correlation of 3-phase Induction Motor Using Magnetic Energy Recovery Switch)

  • 선민균;신상훈;고광철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
    • /
    • pp.2191-2192
    • /
    • 2006
  • 이 논문에서는 자기에너지 회생 스위치(MERS)를 이용한 3상 유도전동기의 역률개선을 목표로 한다. 기존의 MERS는 단상의 유도성 부하에 대해서는 간단한 제어방법을 통하여 역률을 개선시키는 효과가 있는 스위치로 알려져 있다. 이러한 스위치의 기능을 응용하여 논문에서는 실제 전철 등의 구동시스템에서 사용하는 3상 유도전동기 부하를 가진 시스템에 MERS를 적용시켰을 때 어떠한 이점들이 발생 하는지를 제안한다. 시뮬레이션을 위해 실제로 사용되는 3상 유도전동기와 이를 구동시키기 위한 컨버터와 인버터가 포함된 모터 구동 회로를 직접 구성하였다.

  • PDF

자기 에너지 회생 스위치를 이용한 3상 유도전동기의 역률개선 (Power Factor Correlation of 3-phase Induction Motor Using Magnetic Energy Recovery Switch)

  • 선민균;신상훈;고광철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
    • /
    • pp.559-560
    • /
    • 2006
  • 이 논문에서는 자기에너지 회생 스위치(MERS)를 이용한 3상 유도전동기의 역률개선을 목표로 한다. 기존의 MERS는 단상의 유도성 부하에 대해서는 간단한 제어방법을 통하여 역률을 개선시키는 효과가 있는 스위치로 알려져 있다. 이러한 스위치의 기능을 응용하여 논문에서는 실제 전철 등의 구동시스템에서 사용하는 3상 유도전동기 부하를 가진 시스템에 MERS를 적용시켰을 때 어떠한 이점들이 발생하는지를 제안한다. 시뮬레이션을 위해 실제로 사용되는 3상 유도전동기와 이를 구동시키기 위한 컨버터와 인버터가 포함된 모터 구동 회로를 직접 구성하였다.

  • PDF

산업용 인버터의 감속 기법에 관한 연구 (A Study on the Deceleration Techniques in an Industrial drive)

  • 김정한;전종욱;김정빈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 추계학술대회 논문집
    • /
    • pp.69-70
    • /
    • 2012
  • 유도 전동기를 제어하기 위한 일반적인 상용인버터는 다이오드 정류부, 평활용 Cap부, 인버터부로 구성된다. 시스템의 설계에 따라 가감속을 선정 할 수 있으며 산업현장에서는 부하의 관성이 큰 경우에 빠른 감속이 요구되는 경우가 있다. 상용 인버터는 감속 시 소비되는 에너지 외에 회생에 사용되며 회생 에너지에 비례하여 DC 링크 전압이 커지는데 이는 인버터의 소손 원인이 된다. DB유닛으로 이 문제를 해결해 줄 수 있지만 가격적인 부담을 가지고 있다. 부하의 관성이 크고 감속시간이 짧은 경우 DC 링크 과전압 방지를 위해 모터 출력의 정격에 맞는 출력지령을 내보내는 기술에 경제형 상용 인버터 시스템에 맞게 지령을 조정하는 부분을 추가하여 본 논문의 감속기법을 제안하였다. 이 방법은 DB유닛을 사용하지 않았으며, 실험을 통해 검증하였다.

  • PDF

자기 에너지 회생 스위치를 이용한 3상 유도전동기의 역률개선 (Power Factor Correlation of 3-phase Induction Motor Using Magnetic Energy Recovery Switch)

  • 선민균;신상훈;고광철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
    • /
    • pp.1225-1226
    • /
    • 2006
  • 이 논문에서는 자기에너지 회생 스위치(MERS)를 이용한 3상 유도전동기의 역률개선을 목표로 한다. 기존의 MERS는 단상의 유도성 부하에 대해서는 간단한 제어 방법을 통하여 역률을 개선시키는 효과가 있는 스위치로 알려져 있다. 이러한 스위치의 기능을 응용하여 논문에서는 실제 전철 등의 구동시스템에서 사용하는 3상 유도전동기 부하를 가진 시스템에 MERS를 적용시켰을 때 어떠한 이점들이 발생 하는지를 제안한다. 시뮬레이션을 위해 실제로 사용되는 3상 유도전동기와 이를 구동시키기 위한 컨버터와 인버터가 포함된 모터 구동 회로를 직접 구성하였다.

  • PDF

폐루프 유압 에너지 회생 시스템에 관한 연구 (Design and Assessments of a Closed-loop Hydraulic Energy-Regenerative System)

  • 호 치엣 흥;윤종일;안경관
    • 유공압시스템학회:학술대회논문집
    • /
    • 유공압시스템학회 2010년도 춘계학술대회
    • /
    • pp.116-125
    • /
    • 2010
  • In this study, a novel hydraulic energy-regenerative system was presented from its proposal through its modeling to its control. The system was based on a closed-loop hydrostatic transmission and used a hydraulic accumulator as the energy storage system in a novel configuration to recover the kinetic energy without any reversion of the fluid flow. The displacement variation in the secondary unit was reduced, which widened the uses of several types of hydraulic pump/motors for the secondary unit. The proposed system was modeled based on its physical attributes. Simulation and experiments were performed to evaluate the validity of the employed mathematical model and the energy recovery potential of the system. The experimental results indicated that the round trip recovery efficiency varied from 22% to 59% for the test bench.

  • PDF

자기 에너지 회생 스위치를 이용한 3상 유도전동기의 역률개선 (Power Factor Correlation of 3-phase Induction Motor Using Magnetic Energy Recovery Switch)

  • 선민균;신상훈;고광철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1685-1686
    • /
    • 2006
  • 이 논문에서는 자기에너지 회생 스위치(MERS)를 이용한 3상 유도전동기의 역률개선을 목표로 한다. 기존의 MERS는 단상의 유도성부하에 대해서는 간단한 제어방법을 통하여 역률을 개선시키는 효과가 있는 스위치로 알려져 있다. 이러한 스위치의 기능을 응용하여 논문에서는 실제 전철 둥의 구동시스템에서 사용하는 3상 유도전동기 부하를 가진 시스템에 MERS를 적용시켰을 때 어떠한 이점들이 발생 하는지를 제안한다. 시뮬레이션을 위해 실제로 사용되는 3상 유도전동기와 이를 구동시키기 위한 컨버터와 인버터가 포함된 모터 구동 회로를 직접 구성하였다.

  • PDF

유압식 에너지 회생시스템의 성능평가 (Performance Evaluation for Hydraulic Type Energy Regenerative System)

  • 정동수;김형의;강이석
    • 한국자동차공학회논문집
    • /
    • 제14권2호
    • /
    • pp.136-144
    • /
    • 2006
  • Vehicles usually have 3 types of speed pattern like acceleration, travel, and deceleration. It requires much driving energy from engine while accelerating, preserves much kinetic energy by inertia moment at travel speed, and releases the kinetic energy to the air while decelerating by the break system. If we accumulate the kinetic energy while decelerating and reuse the energy at the accelerating stage, then it can elevate the fuel efficiency, reduce the emission and improve the motive power. This paper proposes a hydraulic type energy regenerative system which converts the kinetic energy into hydraulic energy at the stage of deceleration and reuses it at the starting and accelerating stage of vehicles. The test equipment which has the field condition of city bus was prepared to evaluate the performance for energy regeneration. The test results show that both energy regeneration efficiency and fuel efficiency are improved significantly and the emission is reduced notably.

전동열차 운행에너지를 최소화 하는 운전모드 결정 (A Study on the Selection of Train Operation Mode Minimizing the Running Energy Consumption)

  • 김용현;김동환;김치태
    • 한국자동차공학회논문집
    • /
    • 제15권1호
    • /
    • pp.38-48
    • /
    • 2007
  • this paper analyses how much acceleration and deceleration of urban rail vehicle should be applied and how to choose an operation mode to minimize energy consumption when train runs between stations within the fixed operation time. The decided operation pattern satisfying the minimum energy consumption becomes a target trajectory and a basis for the controller design criteria. To make this goal it grasps the characteristics of urban rail vehicle, realize operation energy model of urban rail vehicle and verity the accuracy of embodied model the Matlab simulation with the same operation result of real route. It searches for operation pattern to minimize operation energy by changing the acceleration and deceleration on the imaginative route and proposes operation pattern minimizing energy consumption by applying real operation data between stations of Seoul Metropolitan Subway Line 6.