• Clean Technology
• /
• v.23 no.3
• /
• pp.331-342
• /
• 2017

To estimate the combustion characteristics of sewage sludge and wood pellet, thermogravimetric analysis (TGA) was conducted. As TGA results, combustion characteristics of sewage sludge was worse than wood pellet. In ash fusion temperature (AFT) analysis, slagging tendency of sewage sludge is very high compared to wood pellet. And also, the bubbling fluidized bed reactor with a inner diameter 400 mm and a height of 4300 mm was used for experimental study of combustion characteristics fueled by sewage sludge and wood pellet. The facility consists of a fluidized bed reactor, preheater, screw feeder, cyclone, ash capture equipment and gas analyzer. The thermal input of sewage sludge cases were $54.5{\sim}96.5kW_{th}$, in case of wood pellet experiment, it was $96.1kW_{th}$. As experiment results, the $NO_x$ emission of sewage sludge was averagely about 10 times the $NO_x$ emission of wood pellet. And also CO emission of sewage sludge is about 3.5 times of wood pellet. Lastly as a result of analysis of captured ash in cyclone, the combustion efficiency of all cases were over 99%, but the potential for slagging/fouling was high at all cases by component analysis of ash.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.137-145
• /
• 1990

In this research, biological uptake of heavy metals(Cd(II), Cu(II), Zn(II)) was measured under various conditions ; pH, initial heavy metal concentration, temperature, contact time and the amount of biomass through batch test. From this research, it was found that heavy metals might be removed through adsorption and accumulation in activated sludge process. Heavy metals were highly concentrated by microbial floc in activated sludge. Also, the removal efficiency was reached up to 80~90% within and after 1 hour the increase of removal efficiency was minimal. The order of accumulation efficiency was Cu(II)>Zn(II)>Cd(II), and the bonding strength between heavy metals and microbial floc may be expressed in order of Cu(II)>Zn(II)>Cd(II).

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.315-320
• /
• 1996

In this paper, we investigated the retention amounts(ash contents) according to the addition amounts of retention aid and calcium carbonate and compared the mechanical and optical properties of sheets under the same ash content. As the addition amounts of retention aid increase, the retention of calcium carbonate, that is, ash contents of sheets increase in all retention system. In this case, the sheets included ash content as already expected is produced by adjusting the addition amounts of retention aid and calcium carbonate. Tensile index, burst index, tear index, internal bonding strength of sheets straightly decrease as the ash content of sheets increases. Especially, in the same ash content, all sorts of strength are high in compozil system, low in dual polymer system. Opacity increases along with according to the increase of ash content, and is high in hydrocol system, the worst in dual polymer system. In equal opacity, the strength of paper decreases compozil, hydrocol, and dual polymer system in order. But to judge she superiority or inferiority of retention aids, it should consider the various factors such as the optimum production and process conditions besides the retention amounts of filler and the sheet strength.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.112.1-112.1
• /
• 2011

쌀을 주식으로 하는 우리나라의 여건상 연간 추정치로 싸라기 약 12만톤, 미강 약 49만톤, 왕겨 약 79만톤의 벼 도정 부산물이 발생하고 있다. 본 연구에서는 벼 도정 부산물 중 비식량 자원인 왕겨를 대상으로 고효율 효소 당화를 위한 바이오매스 전처리 방법을 탐색하였다. 왕겨 원시료의 초기 조성은 셀룰로스 34.5%, 헤미셀룰로스 20.5%, 리그닌 25.3%, 회분 14.6%로 나타났는데, 억새 등 초본계 바이오매스와 비교하여 특이하게 높은 성분은 회분으로 이는 벼에 대한 규산질 비료의 시용에서 기인한 것이다. 바이오매스 전처리에 많이 사용되는 암모니아, 희황산 용매와 규산염에 침식성을 가지는 가성소다 용매를 이용하여 각 용매별 단독 및 알칼리-산 복합 처리 하였을 때 효소 가수분해 효율, 고상시료 성분변화 등을 상호 비교하였다. 예비실험을 통하여 암모니아 처리조건은 15%(w/w) $150^{\circ}C$ 20분, 가성소다 처리조건은 1.5%(w/w) $150^{\circ}C$ 20분, 희황산 처리조건은 1.0%(w/w) $150^{\circ}C$ 10분으로 설정하였다. 암모니아 단독, 희황산 단독, 암모니아-희황산 복합 처리 시료의 효소 가수분해 효율은 각각 37.8%, 39.1%, 42.8%로 약 40%선에서 큰 차이가 없었다. 반면 가성소다 단독, 가성소다-희황산 복합 처리시료의 효소 가수분해 효율은 각각 62.7%, 82.8%로 나타나 앞선 3가지 처리방법 대비 50%, 100%에 가까운 효소 가수분해 효율 향상을 보였다. 이 때 전처리 고상시료의 성분 변화를 살펴보면 회분 함량에서 큰 차이를 보였는데 암모니아 단독, 가성소다 단독, 희황산 단독, 암모니아-희황산 복합, 가성소다-희황산 복합 처리에서 각각 47.8%, 77.1%, 43.5%, 55.8%, 94.7%의 회분 성분 기각률(rejection rate)을 나타냈다. 이는 왕겨 효소 가수분해 효율의 최대 저해요인이 회분임을 추정할 수 있다. 왕겨 전처리 알칼리 용매는 암모니아보다 가성소다가 더 효과적이었고 희황산 복합 처리시 그 효과가 크게 상승하였다. 따라서 규산염(회분) 함량이 높은 바이오매스는 고온 고압 조건에서 가성소다 용액으로 처리한 후 그 고상분을 희황산 용액으로 복합 처리하는 시스템이 효소 당화 증진에 매우 유리함을 확인하였다.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.61-72
• /
• 1996

A series of batch and lab-scale continuous tests were conducted to optimize the design parameters for the full-scale in-situ soil flushing experiments. The cleaning abilities of the surfactant solutions of Tween 80, Triton X-100 and SDS were compared for the soil artificially contaminated by hydrophobic organic contaminants: n-dodecane, naphthalene and anthracene. Tween 80 and Triton X-100 were shown to be efficient for n-dodecane. SDS and Tween 80 were shown to be efficient for naphthalene and anthracene. At the end of each column test, the sorbed amount of surfactant to soil was also measured. Tween 80 was found to be the least adsorbed surfactant to soil. The flushing ability at flowrate of 7 ml/min, was hampered comparing to flowrate of 3 and 5 ml/min. Initial pH of the soil did not significantly affect the flushing efficiencies. Tween 80 was determined as the most harmless surfactant for the Gram(+) and Gram(-) bacteria.

• Microbiology and Biotechnology Letters
• /
• v.20 no.2
• /
• pp.196-202
• /
• 1992

Zoogloea ramigera 115 was selected for the production of viscous microbial polysaccharide for bioflocculants usage. Batch, fed-batch, and continuous culture processes were examined with regard to the high biopolymer production. Several carbon sources were tested, including glucose, lactose, molasses, and cheese whey. The C/N ratio of 90 was most effective for biopolymer production from glucose, while the C/N ratios of 30 for lactose and 60 for both molasses and cheese whey substrate gave a maximum production. Fed batch culture proved more effective to increase final biopolymer concentration than batch culture. Continuous fermentation with two stages modifying C/N ratio increased the productivity. The production rates were a maximum at dilution rate of 0.048 $hr^{-1}$ for molasses and at 0.096 $hr^{-1}$for cheese whey.

• KSBB Journal
• /
• v.16 no.6
• /
• pp.620-625
• /
• 2001

This study was examined to investigate the time course behaviors of cell growth and sucrose consumption, and effects of various elicitors on ginsenoside production in batch suspension cultures of Panax ginseng Meyer. Suspended cells reached to the stationary phase at 12 days after innoculation. The maximum cell concentration was 14.7 g-DCW/L at 17 days. The highest cell growth rate was 0.59 g-DCW/L d. The sucrose used as a sole carbon source was hydrolysed to glucose and fructose in 4 days, then quickly utilized until the middle-log phase and consumpted completely at 16 days. Various elicitors were app1ied at 8 days from inoculation which is the middle-log phase. Among the elicitors tested, jasmonic acid was the most efficient to increase the ginseneside production, which was 1.5 times higher than control.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.131-136
• /
• 2013

The aim of this study was to investigate the removal of fluoride using thermally treated pyrophyllite as adsorbent. Sorption experiments were conducted under batch conditions to examine the effects of adsorbent dose, reaction time, initial fluoride concentration and solution pH on fluoride removal. In the experiments, the pyrophyllite thermally treated at different temperatures [untreated (P-U), $400^{\circ}C$ (P-400), $600^{\circ}C$ (P-600)] were used. Results showed that the adsorption capacity was in the order of P-400 > P-U > P-600. The XRD analysis indicated that both P-U and P-400 were composed of quartz, dickite and pyrophyllite while P-600 was quartz. The BET analysis showed that the specific surface area was in the order of P-600 > P-400 > P-U. Kinetic data showed that fluoride sorption to P-400 arrived at equilibrium around 24 h. Equilibrium test demonstrated that the maximum sorption capacity of P-400 was 0.957 mg/g. In addition, fluoride removal by P-400 was not sensitive to solution pH between 4 and 10. However, fluoride removal decreased considerably at highly acidic (pH < 4) and alkaline (pH > 10) conditions. This study demonstrates that pyrophyllite could be used as a low-cost adsorbent for fluoride removal from aqueous solution.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.787-791
• /
• 1995

중수형 원자력발전소의 중수는 중성자 흡수반응에 따라 그 일부가 삼중수소화 된다. 삼중수소의 제거반응에 효율적인 고분자 백금촉매를 제조하여 회분식 반응기에서 탈삼중수소 반응실험을 수행하였다. 기액접촉반응탑내에서 고분자 촉매는 탈삼중수소 반응에 유효한 활성이 있음을 확인하였다.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.181-187
• /
• 1999

We have investigated industrial media for lactic acid fermentation to reduce the cost of nitrogen sources. Corn steep liquor (CSL) was successfully used at 5% (v/v) in batch fermentations. Use of soluble CSL improved the productivity about 20% with an advantage of clearer fermentation broth. Yeast extract-complemented CSL improved the productivity about 20% with an advantage of clearer fermentation broth. Yeast extract-complemented CSL media further increased the increased the productivity. It was found that 3.1 g/L yeast extract and 5% CSL could be an effective substitute for 15 g/L yeast extract in 10% glucose medium. Brewing yeast was also used as a sole nitrogen source equivalent to 5% CSL. A continuous culture coupled with cell-recycle by microfiltration at the dilution rate of 0.05-0.065 h-1 led to the highest lactic acid productivity. Lactic acid was recovered by electrodialysis from the cell free broth. Depleted cell free broth supplemented with 5-10 g/L of yeast extract performed reasonably in batch and continuous cultures. Reuse of the fermentation broth may reduce the cost of raw materials as well as minimize the fermentation wastes.