• The Monthly Diabetes
• /
• s.223
• /
• pp.46-49
• /
• 2008

우리나라는 65세 이상 노인인구가 전체인구의 9.5%로 이미 '고령화사회'로 진입하였다. 현재 그 속도가 더욱 빨라져 이제는 '초고령사회'로 나아가고 있는 실정에서 노인들을 위한 전문 의료시설이 절실하다. 이에 발 맞춰 노인성 질환을 중심으로 진료하고 어르신들을 위한 특성화된 치료를 제공하고 있는 노인전문병원이 있어 찾아가 봤다.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.375-384
• /
• 2001

The shared disk file systems use a technique known as file system journaling to support recovery of metadata on the SAN(Storage Area Network). In the existing journaling technique, the metadata that is dirtied by one host must be updated to disk space before some hosts access it. The system performance is decreased because the disk access number is increased. In this paper, we describe a new recovery technique using a global buffer to decrease disk I/O. It transmits the dirtied metadata into the other hosts through Fibre Channel network on the SAN instead of disk I/O and supports recovery of a critical data by journaling a data as well as metadata.

• Analytical Science and Technology
• /
• v.9 no.2
• /
• pp.179-191
• /
• 1996

In order to understand the high temperature deformation behavior of superalloy 718, a rotating grade 718 alloy has been compression tested to about 0.7 upset ratio at $927{\sim}1066^{\circ}C$ temperature range and $5{\times}10^{-4}{\sim}5{\times}10^0sec^{-1}$ strain rate. The maximum flow stress was increased with increasing strain rate, and similar behavior was observed with decreasing temperature. At low temperature and high strain rates other than $5{\times}10^{-1}sec^{-1}$, strain softening was occurred mainly by dynamic recovery and deformation twinning processes, while at high temperature and low strain rates strain softening was offseted by dynamic recrystallization. At $5{\times}10^{-1}sec^{-1}$, strain hardening was occurred due to work hardening of the dynamic recrystallized grains. Strain rate sensitivity, m, was varied with strain rates. In the case of lower strain rate tests, m was measured as 0.3 and it was observed that the deformation was mainly controlled by dynamic recrystallization. At higher strain rate, m was lowered to 0.1 and the deformation was controlled by the dynamic recovery and the deformation twinning processes.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.197-206
• /
• 2006

This study evaluated the effect of ultrasonic irradiation on improving the flux and cleaning efficiency in membrane process which is widely applied for the treatment of landfill leachate. The experiments on improvement of membrane flux according to the types of membranes(hallowfiber microfiltration, MF and tubular ultrafiltration, UF) were performed with changing frequency($40{\sim}120$ kHz), intensity ($200{\sim}500$ W) and irradiation time of ultrasound as well us operation pressure($0.1{\sim}2.3kg/cm^2$). Membrane was fouled for the first 50 min with primary treated leachate and then the change in flux according to ultrasonic irradiation period was observed for 70 min. Parameters influenced to the recovery ratio corresponding the net flux on pure water and to the enhancement ratio applied after ultrasonic irradiation on the flux were analyzed. In same condition, the flux was improved in proportion to ultrasonic intensity while the improvement of flux was inversely proportional to ultrasonic frequency. The cleaning effect of membrane was delayed and reduced when operation pressure of membrane was high. The recovery ratio and enhancement ratio for $0.1{\mu}m$ MF membrane were 10% and 500%, respectively while those were maximized at $75{\sim}98%\;and\;40{\sim}50%$ for UF membrane for 10,000 and 100,000 MWCO, respectively. In conclusion, it was confirmed that ultrasonic cleaning using mechanical vibration is alternative to water or chemical cleaning for improving membrane flux.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.6
• /
• pp.591-595
• /
• 1990

A promoting effect of ginseng saponin on the growth recovery rate of Saccharomyces rouxii which was treated by heat was confirmed in previous report(22). In order to deduce the promoting effect on the growth recovery of the heat stressed yeast, the effect of ginseng saponin on the activity and the heat stability of the amylase produced by Sacchirromyces rouxii were observed. The amylase showed the highst activity at 0.01％ of saponin. At this concentration, the activity increased about 23％ compared to the control. Furthermore, the ginseng saponin showed a protective effect against thermal inactivation of the amylase produced by Saccharomyces rouxii.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.371-378
• /
• 2012

This paper presents a timing recovery method using Gardner TED (Timing Error Detector) with a Peak Detector using Parabola Peak Interpolation in underwater acoustic communication. This method will have an eye to improve phase converge speed of timing recovery and reduced amount of Tx data. The OQPSK(Offset Quadrature Phase Shift Keying) modulation technique was considered. The proposed algorithm has faster recovery speed and more accurate than Gardner TED because the sampling values in the proposed algorithm are moved persistingly to maximum or minimum point using parabolic peak interpolation. when simulation performed using Preposed method, it improved BER (Bit Error Rate) performance about 23% And to evaluate the performances of the proposed algorithm the sea trial was performed in the Korean East Sea. And distance of a transmitter-receiver is 3 km each other. As a result, the proposed algorithm outperforms better BER performance about 20% of timing recovery than the Gardner method. Also Proposed method improved converge speed of timing recovery about 1.4 times better than Gardner method.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.47-54
• /
• 1996

Highly sensitive $WO_{3}$ doped with $SnO_{2}$ and Pt thick-film sensors for NOx gas were fabricated. The sensors had a maximum sensitivity at operating temperature of $250^{\circ}C$, but the optimum operation temperature, considering recovery desorption time, was at $330^{\circ}C$. These sensors improved sensitivity, response and recovery time, selectivity and stability, as compared to $WO_{3}$ sensors. The good linearity of sensitivity as a function of the gas concentration exhibited the possibility to be used for concentration meter.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.557-562
• /
• 1998

This study was conducted to investigate the influence of soil moisture on the photosynthetic rate, transpiration rate, stomatal conductance, leaf water content and its any correlation in soybean. Followings were achieved as a conclusion. At the soil moisture was moved from drought condition to saturation condition, the photosynthetic rate, transpiration rate, stomatal conductance and leaf water content were gradually increased on the period of re-watering treatment. The recovery of photosynthetic rate was faster than others. There were positive correlation with the photosynthetic rate and leaf water content, the stomatal conductance and leaf water content, the photosynthetic rate and stomatal conductance respectively, but the correlation coefficient of photosynthetic rate and leaf water content was high.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.51-51
• /
• 1995

혐기성 미생물의 특징은 성장 속도가 느리고 침강성이 좋지 않다는 점이다. 이 문제의 한 해결책인 막결합형 혐기성 소화는 고액분리를 완전하게 수행함으로써 미생물의 유출을 방지하여 반응조 내부에 미생물을 고농도로 유지할 수 있을 뿐만 아니라 에너지의 회수와 설비 면적의 축소 등 많은 장점이 있다. 이 막결합형 혐기성 소화의 경제성은 사용된 분리막의 투과 속도에 의해 크게 좌우된다. 분리막의 투과 속도에 영향을 미치는 인자로는 미생물 및 유입수를 비롯한 반응조 내부의 상태, 막모듈 압력 온도 막면유속 등의 운전 조건이 있다. 또한 사용되는 분리막 자체의 재질도 투과 유속에 큰 영향을 미친다. 본 연구의 목적은 관형의 지르코니아 스킨층과 탄소 소재 지지층으로 이루어진 복합 재료 분리막과 폴리프로필렌 분리막을 이용하여 막재질에 따른 막오염 특성을 비교 분석하고 효과적인 투과율 회복 방법을 확립하는 것이다.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.211-217
• /
• 2010

This study was conducted to investigate a proper method of ball mark repair by comparing the creeping bentgrass recovery speed on golf course green treated by various methods of ball mark repair. Nine general repairing methods were tested and compared; control (no repair, A type), two common methods of USGA (B type) and GCSAA (C type), three methods with fork shaped hand set performing at Korean golf courses (Ansung Benest, D; Sky72, E; Lakeside, F type), and three methods using the repair machine with 6, 8, or 14 teeth (G, H, I type, respectively). Three creeping bentgrass cultivar of 'Penncross', 'T-1', and 'CY-2' were tested in this field experiment. This test was carried out from September to November in 2009 at the nursery on the Seoul Lakeside Golf course. The average speed of turfgrass recovery after various ball mark repairing methods have been ranked as in the order of E, D, C, B, F, I, H, G, and A. The methods of hand practise showed more effective results than repair method using machines. The ball mark recovery speeds of 'Penncross' were in the order of E, D, B, C, F, I, H, and A. In the case of 'T1' and 'CY-2', similar orders were showed as D, E, B, F, C, H, I, A, G and the order of D, E, C, F, B, H, G, I, A, respectively. The ball mark recovery speed among creeping bentgrass cultivar resulted in the order of 'CY-2', 'Penncross', and 'T-1'. The most proper method of ball mark repair was repair method using a hand set tool especially the method of the Sky72 Golf course (E type). At the first, remove a damaged grass area with fork and tap. And then gather the side grasses into the center area with pulling the grasses with fork. After that, make harden and flat on the turf surface by pounding and rolling with the round wooden stick. The final Nstep, water the repaired grass surface. This ball mark repairing practise showed a most rapid and proper recovery method on creeping bentgrass green.