• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.75-79
• /
• 2022

Fresh, washed ginseng can be contaminated with microorganism loads as high as 6.5 log CFU/g for total bacteria and 4.3 log CFU/g for mold. The goal of this study was to test eight antibacterial agents on ginseng. Immersing fresh ginseng washed in 1% (w/w) sodium citrate, sodium diacetate, sodium acetate, citric acid, and sodium lactate solution for 1 h resulted in a bactericidal effect of 31.0-97.5% for total bacteria. Among the organic acids, sodium citrate had the best antibacterial effect, with total bacteria reduced from 6.5 log to 4.9 log CFU/g. A 1% (w/w) vitamin B₁ lauryl sulfate solution with surfactant function by hydrophilic and hydrophobic sites can reduce 2.7 log CFU/g (99.8% inactivation) on total bacteria. In the 1% (w/w) calcium oxide solution, total bacteria were reduced by 3 log, showing an excellent inactivation effect of 99.9%. Calcium oxide is a highly useful material for inactivation of microorganisms in fresh ginseng.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.4
• /
• pp.3-57
• /
• 1985

This research was conducted to examine the feasibility of developing fire retardant particleboard and complyboard. Particleboard were manufactured using meranti particle(Shorea spp.)made with Pallmann chipper, and complyboard meranti particle and apitong veneer (Dipterocarpus spp.). Particles were passed through 4mm (6 mesh) and retained on 1mm (25 mesh). Urea formaldehyde resin was added 10 percent on ovendry weight of particle. Face veneer for complyboard was 0.9, 1.6 and 2.3mm in thickness and spread with 36 g/(30.48 cm)$^2$ glue on one side. Veneers were soaked with 10 percent solution of five fire retardant chemicals (diammonium phosphate, ammonium sulfate, monoammonium phosphate, Pyresote and Minalith), and particles with 5, 10, 15 and 20 percent solution of five chemicals. Particleboard and complyboard were evaluated on physical and mechanical properties, and fire retardancy. The results obtained were summarized as follows. 1. Among five fire retardant chemicals treated to particleboard and complyboard, the retention of ammonium sulfate in 5 percent solution showed the lowest as 1.39 kg/(30.48 cm)$^3$ exceeding the minimum retention of 1.125 kg/(30.48 cm)$^3$ recommended by Forest Products Laboratory and Koch. 2. Particleboard and complyboard treated with diammonium phosphate showed higher modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength and screw holding power than those with the other chemicals. 3. MOR and MOE of complyboard treated with fire retardant chemicals were greater than those of fire retardant particleboard. 4. Thickness swelling of fire retardant complyboard was lower than that of fire retardant particleboard. 5. The moisture content of the boards treated with Pyresote and Minalith increased and with monoammonium phosphate reduced. 6. Fire retardant particleboard showed no ignition, and fire retardant complyboard started ignition, but time required to ignite was prolonged comparing the controlboard. Complyboard with only shell veneer treated showed ignition and lingering flame, but lingering flame time was shorter than controlboard. Complyboard with treated both core and veneer showed ignition but not lingering flame. 7. Flame length, carbonized area and weight loss were smaller than controlboard but had no significant difference among chemicals treated. 8. Temperature of unexposed surface of fire retardant particleboard was lowered with the increasing concentration of five chemicals. 9. Temperature of unexposed surface of fire retardant particleboard was lowered with the highest in Pyresote and the lowest in Minalith. 10. Temperature of unexposed surface of fire retardant complyboard was lower than that of controlboard.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.839-852
• /
• 1997

It has been submitted that different ion solutions containing sulfate induce crystal growth and might substitute conventional acid etching for pretreatment of enamel in orthodontic bonding(${\AA}rtun$ et al., Am. J. Orthod. 85, 333, 1984). This investigation was designed to evaluate the relevance of crystal growth on the enamel surface as an alternative to conventional acid etching in direct bonding of orthodontic brackets. Annexing Li2SO4, MgSO4, K2SO4 respectively in the solution with $25\%$ polyacrylic md 0.3M sulfuric acids were employed to enhance the crystal growth. Human bicuspids were treated with various parameters as combinations of crystal growth and glass ionomer cement, crystal growth and orthodontic resin, acid etching and orthodontic resin for an investigative purpose. Crystal growth solution containing MgSO4 showed the highest shear bond strength(15.6MPa) within the groups of bonding brackets with glass ionomer cement(p<0.01). Bonding with glass ionomer cement on the surface of crystal growth demonstrated higher shear bond strength than with orthodontic resin(p<0.001). Bonding with glass ionomer cement on the surface treated with crystal growth solution containing MgSO4 or K2SO4 was not different shear bond strength statistically from bonding with orthodontic resin on the acid-etched surface. It suggests that bonding brackets with glass ionomer cement on the surface treated with crystal growth solution containing MgSO4 or K2SO4 is a potential alternative to bonding with resin on the acid etched sufrace.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.412-419
• /
• 2004

To investigate the utilization of calcium lactates (CaL) as coagulants for tofu manufacture, the quality characteristics and shelf-life of tofu made by CaL-P (black snail powder) and CaL-A (black snail ash) were investigated and compared to calcium chloride (CC), magnesium chloride (MC), calcium sulfate (CS ) and standard calcium lactate (CaL-S). And also, total microbe and turbidity of the tofu were determined during storage at 1$0^{\circ}C$. Coagulation ability of CaL-A was the highest, and the ability of CaL-P was higher than that of CaL-S. Yield of CaL-A tofu was similar to those of CS and CC tofu, while the yield of CaL-P tofu was 50% compared to that of CC. L＊ value of CaL-P tofu was lower, but a＊ and b＊ values were higher than those of other tofus. The hardness of tofu showed in the order of CaL-S>CS>CC>CaL-P>MC>CaL-A, while the cohesiveness showed in the order of MC>CaL-S>CC>CS>CaL-P>CaL-A. Calcium contents were 57 mg% in MC tofu, 174 mg% in CS tofu, 116 mg% in CaL-S tofu, 95 mg% in CaL-A tofu and 172 mg% in CaL-P tofu. From the results of microscopic observations, the lower hardness showed the more soft and the smaller particle. The particle of CaL-A tofu was small and uniformity but the size of CaL-P and CC tofu showed coarse. Sensory quality of CaL-P and -A tofu were better than the other tofu evaluated by texture, springiness, flavor and overall taste. The shelf-life estimated by total microbe was 4∼6 days in CC, MC, CS, CaL-S and CaL-A tofu, but 8 days in CaL-P tofu at 1$0^{\circ}C$. From the above results, the CaL-P and -A may believe to use as coagulant for tofu manufacture due to its softened taste and enhanced shelf-life, and higher calcium content which has higher absorbability in human body.

• The Korean Journal of Pesticide Science
• /
• v.3 no.3
• /
• pp.60-67
• /
• 1999

Insecticidal activities of imidacloprid to sucking type insect pests, brown planthopper (BPH, Nilaparvata lugens) and peen peach aphid (GPA Myzus persicae), to chewing type insect pests, tobacco cut worm (TCW; Spodoptera litura) and beet armyworm (BAW, Spodoptera exigua) and to spiders, Pirata subpiraticus, Pachygnata clercki and Ummeliata insecticeps, as natural enemies were investigated by several bioassay methods. $LD_{50}$ of the chemical by topical treatment to BPH was 0.015 ${\mu}g/g$(48 hrs), while $LC_{50}s$ by leaf dipping and root zone treatment were 18.1 and 21.5 ppm, respectively. There was no difference in insecticidal activities between leaf dipping and root zone treatment. Imidacloprid also showed ovicidal effect of root zone treatment and its $LC_{50}$ was 6.8ppm $LD_{50}$ (48 hrs after treatment) of imidacloprid to GPA was $0.4{\mu}g/g$ in case of topical application and $LC_{50}s$ by leaf dipping and root zone treatment were 1.9 ppm and 13.7 ppm respectively. Leaf dipping was more effective than root zone treatment in GPA At topical application $LD_{50}$ (48 hrs after treatment) of imidacloprid to chewing type insect pests, TCW and BAW, were greater than 1,492 and $312{\mu}g/g$ and $LC_{50}s$ by leaf dipping method were 4,803 and Heater than 5,000ppm respectively. This means that imidacloprid has much less effect on chewing type insect pests, TCW and BAW. $LD_{50}$(48 hrs after treatment) of imidacloprid to wandering spiders, Pirata subpiraticus, Pachygnata clercki at topical application were greater dan $2941{\mu}g/g$ and greater than $2,976{\mu}g/g$ respectively and that to webbing spider, Ummeliata insecticeps, was 357 ${\mu}g/g$. Imidacloprid showed very low toxicity to the spiders and its selective toxicity ratios between spiders and BPH were greater than 19,600, greater than 19,800 and 23,800, respectively.

• Korean Journal of Weed Science
• /
• v.16 no.2
• /
• pp.114-121
• /
• 1996

This study was conducted to investigate seed germination, seedling growth, and responses to herbicides of Bidens tripartita L. When the field-collected seeds were stored under a dry-room temperature, dry-low temperature, wet-low temperature, or dry-high temperature condition, no seeds were germinated in a growth chamber with 14 hr photoperiod up to 35 days after the storage. Exceptionally, however, some seeds stored under a wet-room temperature condition were germinated after 25 days of the storage. This might be due to the fact that the seed coats were damaged by fungi which developed during the storage. Seeds stored under a wet-low temperature condition (stratification) began to be germinated after 3 months of the storage and the germination rate increased with a prolonged stratification. Almost all seeds were germinated after 9 months of the stratification. These results suggest that the dormancy of B. tripartita L. seeds relate to the seed coat and thus several attempts were made to induce seed germination through damaging or weakening the seed coat. Freezing($-20^{\circ}C$), drying($100^{\circ}C$), or swelling($40^{\circ}C$) of the seeds was not effective to induce the germination. Treatments of concentrated sulfuric acid, $KNO_3$, or gibberellin to the seeds had no effect on inducing the germination. However, ethrel had a stimulatory effect on the germination of the seeds with an optimum concentration of 250ppm. A seed cutting was also effective to induce the germination, but seedlings from the seeds had cutted cotyledons. Germination of the stratified seeds varied with the temperature condition to which they were subjected, but not with light. The germination rate was the highest at 35 - $40^{\circ}C$. Although the seeds were not able to germinate under a submerged condition, seedlings after 2-leaf-stage exhibited better growth under a submerged or a subirrigated condition than under an upland condition. Among the herbicides tested, pyrazosulfuton-ethyl, linuron, and bentazone were found to be effective for controlling B. tripartita L., having more herbicidal effect with an earlier application.