• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.151-152
• /
• 2011

본 연구에서는 황산니켈, 아세트산니켈, 썰파민산니켈 등 니켈 염 종류에 따른 무전해 니켈 도금피막의 기계적 특성을 평가하고자 하였다. 동일한 두께로 도금피막을 형성하여 내절성 시험결과 황산니켈을 사용한 무전해 니켈 도금피막의 경우 97회, 아세트산니켈을 사용한 경우 259회, 썰파민산 니켈을 사용한 경우 467회의 굴곡 시험 후 도금 피막이 파괴되어 썰파민산니켈이 니켈염으로 사용될 경우 가장 우수한 피막을 나타내었다. 도금피막의 연신울 측정결과 니켈염으로 황산니켈을 사용할 경우 0.28%의 연신율을 나타내었고 아세트산니켈을 사용할 경우 0.32%의 연신율을 나타내었고 썰파민산니켈을 니켈염으로 사용한 결과 0.69%의 높은 연신율을 나타내었으며 개발한 도금액을 PCB 도금을 위한 Cu Pattern에 도금한 경우 Cu line에 선택적으로 도금이 가능하였다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 1993.04a
• /
• pp.1-23
• /
• 1993

중유회는 중유 화력발전소 보일러의 전지집진기에서 생성되는 분진으로 지금까지는 산업폐기물로 폐기되어 왔으나 이의 절대량이 증가하고 환경규제가 엄격하여짐에 따라 그대로 폐기할 수는 없게 되었다. 한편 이중에는 바나듐과 니켈 등의 유가금속이 3-10% 함유되어 있어 자원으로서의 가치가 충분하다. 이에 본 연구에서는 중유회로부터 바나듐과 니켈을 효과적으로 추출, 분리하여 재활용하기 위한 목적으로 바나듐과 오산화바나듐으로 니켈을 황산니켈로 각각 회수하는 방법에 관한 기초연구를 행하였다.

• Resources Recycling
• /
• v.30 no.3
• /
• pp.55-62
• /
• 2021

In Korea, a good recycled product (GR) certification system was introduced in 1997 to improve resource and energy use efficiency. However, in industry and society, recycled products are not used well because of the lack of awareness of recycled materials. In this study, the status of domestic and international quality standards for nickel materials was investigated, and the purity and electrochemical properties of nickel sulfate prepared from ore and nickel sulfate recovered from waste lithium-ion batteries were evaluated during the electroplating process. As a result of the test, it was found that there is no quality difference between recycled nickel sulfate and high-purity nickel sulfate reagents when used in the electroplating industry.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.51-59
• /
• 2019

This study focused on the synthesis of the nickel hydroxide using ammonium sulfate in leaching solution from waste nickel-cadmium batteries. The effect of pH, temperature and the input amount of ammonium sulfate in leaching solution was investigated. The ammonium nickel sulfate with high purity was obtained in acidic leaching solution and the solution temperature of $60^{\circ}C$. The suitable molar ratio of the input amount of ammonium sulfate to nickel in solution is 2:1. The impurity about 1.4 at.% of Cd was included in the nickel hydroxide precipitates when ammonium nickel sulfate was used. At the process using sodium sulfide which precipitates the cadmium in solution, nickel and iron compounds were precipitated together.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.312-313
• /
• 2015

무전해 도금은 석출응력이 낮고 작업하기가 용이하기 때문에 산업분야에 있어서 중요한 역할을 한다. 무전해 도금 공정에 있어서, 니켈금속은 차아인산염, 아미노보레인 혹은 수소화붕소 화합물($HBF_4$)에 의한 니켈이온의 화학적 환원에 의해 도금된다. 환원반응이 진행함에 따라서 도금액 중에서 니켈과 차아인산염 이온은 감소한다. 이에 이러한 이온을 보충하기 위하여 도금액 중에 황산니켈과 차아인산나트륨이 일반적으로 첨가된다. 하지만 축적된 인산염, 황산염, 나트륨과 이외의 물질이 전착 박막의 품질을 떨어뜨리고 도금액은 폐기되기도 한다. 니켈회수 속도는 종래의 50% 이하였던 것이 90%이상으로 향상되었다. 이온교환법은 니켈도금 폐액으로부터 니켈회수에 필요한 친환경적이고 원가절감의 기술이라고 사료된다. 특히, 갈탄이 저렴하고 양이온 교환성능이 뛰어나다. 이유는 -COOH, -OH 등의 기능성 그룹을 갖기 때문이다. Fe-P 화합물은 식물에 유용하지 못하고 마그네슘과 칼슘 기반의 석출물은 저렴하고 취급이 용이하며 비료와 같이 재활용이 가능하기 때문에 일반적인 인의 제거 수단이 될 수 있다. 본고에서는 니켈도금 폐액으로부터 인을 제거하는 데 $Ca(OH)_2$, $CaCl_2$와 $CaCO_3$를 채택하여 인이 제거되는 정도를 비교하였고 니켈회수율을 높이기 위하여 갈탄을 사용하였다.

• Resources Recycling
• /
• v.8 no.5
• /
• pp.28-33
• /
• 1999

Trus paper presenls a hydrometallurgical process Tor recovcnng ~uckcals mckcl sulfate fiom the spent nickel-cadrnlum bauery in whch c:,dmi~lm war re~novcdb y vapowing m e h d in vacuum. F ~ s ts,e lcct~vcc rushing and classification mell~odw ere performed to separate iron physically and the nickel-rich sample (over 80% nickel) was obtained. Ths sarnple was dissolved in sulf~ uiuica cid to obtain a luckcl sulfatc soluho~d~o se to its seluradon painl. TIE Cree acid in the unpurificd nickcl solut~onw as neutl-dized and iron war ve~novedk om the solulmn Thc mckel sulhte solution was c~yst~llizeadt around 45'C to obtain ruckel sulfate henahyril-ate.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.183-189
• /
• 2010

It is of importance to separate Ni(II) and Co(II) from Mg(II) in solution which was leached from nickel laterite ore. In order to investigate the possibility of separating Ni(II) and Co(II) from Mg(II), adsorption behavior of the three metals from individual and mixed sulfate solutions was investigated by using Diphonix resin. The concentration of each metal in solution was fixed at 100 ppm and the pH of the sulfuric acid solution was changed from 5 to 7. At ambient temperature, the adsorption behavior of the three metal ions followed Langmuir adsorption isotherm. The loading capacity of Diphonix resin for the three metal ions was obtained from the Langmuir isotherm. Since adsorption behavior of the three metal ions from the mixed solution was similar to each other, it was found to be difficult to separate Ni(II) and Co(II) from Mg(II) by using Diphonix resin.

• Resources Recycling
• /
• v.4 no.3
• /
• pp.32-39
• /
• 1995

Thc purpose of this study is to develop the efficient process for recovering vanadium and nickel from the incineralionash of the oil fly ash. In this paper, the physical and chemical properties of the incineration ash was examined, and theleaching characteristics of the incineration ash were investigated by water leaching and sulEuric acid leaching tcsls. The incinerationash of oil fly ash was mainly consisted of oxldes such as V,09, V,O,, NaVO,, Ni,(VO,)Z, Fe,O,, CaSO,, SiO,.Thc waler leaching showed low extraction of metallic components, while the sulfunc acid lcaching with high temperahlreand pressure increased the extraction of vanadium and nickcl considerably. For instance, the exlraction rates of the metalllccomponents on the sulfuric acid leaching were 99% for V and 45% for Ni at 90$^{\circ}$C with pH 0.5 H,SO,, and were86% for V and 75% far Ni at ZOO"C(64 psi) with pH 1.0 H-SO,. with pH 1.0 H-SO,.

• Journal of Environmental Impact Assessment
• /
• v.32 no.2
• /
• pp.123-133
• /
• 2023

Wastewater generated in the secondary battery production process contains lithium and high-concentration sulfate. Recently, as demand as demand for high-Ni precursors with high-energy density has surged, nickel emission is also a concern. Lithium and sulfate are not included in the current water pollutant discharge standard, so if they are not properly processed and discharged, the negative effect on future environment may be great. Therefore, in this study, the ecotoxicity of lithium, nickel, and sulfate, which are potential contaminants that can be discharged from the secondary battery production process, was evaluated using water flea (Daphnia magna) and luminescent bacteria (Aliivibrio fischeri). As a result of the ecotoxicity test, 24-hour and 48-hour D. magna EC₅₀ values of lithium were 18.2mg/L and 14.5mg/L, nickel EC50 values were 7.2mg/L and 5.4mg/L, and sulfate EC₅₀ values were 4,605.5mg/L and 4,345.0mg/L, respectively. In the case of D. magna, it was found that there was a difference in ecotoxicity according to the contaminants and exposure time (24 hours, 48 hours). Comparing the EC₅₀ of D. magna for lithium, nickel, and sulfate, the EC₅₀ of nickel at 24h and 48h was 39.6-37.2% compared to lithium and 0.1-0.2% compared to sulfate, which was the most toxic among the three substances. The difference appeared to be at a similarlevelregardless of the exposure time. The EC₅₀ of sulfate was 253.0-299.7% and 639.5-804.6%, respectively, compared to lithium and nickel, showing the least toxicity among the three substances. The 30-minute EC₅₀ values of luminescent bacteria forlithium, nickel, and sulfate were 2,755.8mg/L, 7.4mg/L, and 66,047.3mg/L,respectively. Unlike nickel, it was confirmed that there was a difference in sensitivity between D. magna and A. fischeri bacteria to lithium and sulfate. Studies on the mixture toxicity of these substances are needed.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.41-47
• /
• 2010

It has been continuously noted that many sewage treatment concrete structures have deteriorated due to sulfur-oxidizing bacteria. There have been many reports on approaches to protecting concrete from this bacteria corrosion. The purpose of this study is to evaluate the inhibition of growth of a sulfur-oxidizing bacterium by a antifungal agent such as $NiSO_4{\cdot}6H_2O$, and the characteristics of polymer cement mortar using nickel type antifungal agent. First, we developed antifungal agents using metal nickel and $NiSO_4{\cdot}6H_2O$ to inhibit the growth of thiobacillus novellus, which is the sulfur-oxidizing bacteria in concrete. Then, ordinary cement mortar and polymer cement mortar using nickel type antifungal agent with various polymer-cement ratios, and antifungal agent content were prepared, and were tested for the antifungal adding effect, compressive and flexural strengths, expansion and leaching of nickel ion. From the test results, it was confirmed that the adding of an antifungal agent has an inhibition effect on the growth of sulfur-oxidizing bacteria at antifungal agent contents of 20 mM or more. In addition, the strengths and expansion of polymer cement mortars are not significantly changed by the addition of an antifungal agent. Therefore, the nickel-type antifungal agent developed in this study can be used to improve the durability of reinforced concrete hume pipe in the construction industry.