• Journal of the Korean Chemical Society
• /
• v.37 no.10
• /
• pp.895-902
• /
• 1993

The chemical behavior of trivalent lanthanide ($Pr^{3+}\;and\;Dy^{3+}$) and organo ligands (phen' and terpy') complexes was investigated by the use of UV/vis-spectrophotometric, magnetization and electrochemical method. The magnitude of crystal field splitting energy, the pairing energy and spin state was obtained from the spectra of complexes. These complexes were founded to be diamagnetics, delocalization and low spin complexes. The electrochemical behavior of complexes was observed by the use of cyclic voltammetry in aprotic media. These reduction peaks were irreversible two step reduction processes by electron transfer.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.291-299
• /
• 2018

Under a pyro-processing concept, an electrolytic reduction process has been developed to reduce uranium oxide in molten salt by electrochemical means as a part of spent fuel treatment process development. Accordingly, a model based on electrochemical theory is required to design a reactor for the electrolytic reduction process. In this study, a 1D model based on the phase-field theory, which explains phase separation behaviors was developed to simulate electrolytic reduction of uranium oxide. By adopting parameters for diffusion of oxygen elements in a pellet and electrochemical reaction rate at the surface of the pellet, the model described the behavior of inward reduction well and revealed that the current depends on the internal diffusion of the oxygen element. The model for the electrolytic reduction is expected to be used to determine the optimum conditions for large scale reactor design. It is also expected that the model will be applied to simulate the integration of pyro-processing.

• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.15-21
• /
• 1988

The Polarographic behavior of 1-(2-thiazolylazo)-2-naphthol (TAN) in acetonitrile solution was studied. From the DC polarograms of TAN in acetonitrile solution, the type of reduction current and the effect of proton donor such as water have been investigated. In order to explain the reduction mechanism, the number of the electrons for each reduction step was measured by controlled potential coulometric technique and the electrolysis products were identified by UV-Vis spectroscopy and IR spectroscopy. The results were shown that the reduction of TAN in acetonitrile solution occurred with four-one electron steps. In addition, each reduction step was considerably reversible and the reduction current was diffusion controlled.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.37-43
• /
• 2002

As the consumption of galvanized steels in cans and automobiles and the quantity of scraps increase, the recycling problems of EAF dust become a important problem. Valuable metals such as Fe, Zn, Pb are of continued interest to metallurgists. To recover the valuable metal and to remove the toxicity of EAF dust, high temperature smelting process is or researching as a pilot scale. The Reduction kinetics of Zn in EAF dust is so important in a view of the economic consideration of the process. In this study, the kinetics behavior of Zn in EAF dust were measured as a point of application in high temperature smelting process. The rate control step in ZnO and franklinite is revealed to be chemical reaction on the reaction surface.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.62-69
• /
• 2013

A study on the recovery of lithium and leaching behavior of NCM powder by carbon reduction for NCM-system Li-ion battery scraps was conducted. First of all, the oxide powders of NCM-system with layer structure were decomposed by carbon, lithium was converted to lithium carbonate by carbon reaction at above $600^{\circ}C$. The lithium carbonate powders with 99% purity were manufactured by washing method with water and concentration process for NCM powder after carbon reduction. The reaction yield was approximately 88% at $800^{\circ}C$ by carbon reduction. At this time, leaching efficiency at 2M sulfuric acid concentration was over 99% for cobalt, nickel and manganese.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.405-409
• /
• 1991

The electrochemical behaviors of copper-1-(2-thiazolylazo)-2-naphthol [Cu(II)-TAN] complex in acetonitrile (AN) solution have been investigated by the use of polarography, controlled potential coulometry and UV-Vis spectroscopy. Cu(II)-TAN complex exhibit three reduction waves at -0.91 V, -1.34 V and -1.65 V vs. S.C.E. in acetonitrile solution containing 5.0 ${\times}\;10^{-3}$M tetraethylammonium perchlorate. Every reduction wave is diffusion controlled. The first reduction wave is considerably reversible and this process is attributed to the formation of anion radical. The second reduction process to the dianion is followed by a chemical reaction producing a complex of hydrazo complex. The third reduction process produce Cu(Hg) amalgam and amine compound.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.151-157
• /
• 2005

A one-dimensional numerical model was developed to simulate vertical profiles of electron acceptors and their reduced species in benthic sediments. The model accounted for microbial degradation of organic matter and subsequent chemical reactions of interest using stoichiometric relationships. Depending on the dominant electron acceptors utilized by microorganisms, the benthic sediments were assumed to be vertically subdivided into six zones: (1) aerobic respiration, (2) denitrification, (3) manganese reduction, (4) iron reduction, (5) sulfate reduction, and (6) methanogenesis. The utilizations of electron acceptors in the biologically mediated oxidation of organic matter were represented by Monod-type expression. The mass balance equations formulated for the reactive transport of organic matter, electron acceptors, and their corresponding reduced species in the sediments were solved utilizing an iterative multistep numerical method. The ability of model to simulate a freshwater sediments system was tested by comparing simulation results against published data obtained from lake sediments. The simulation results reasonably agreed with field measurements for most species, except for ammonia. This result showed that the C/N ratio (106/16) in the sediments is lower than what the Redfield formula prescribes. Since accurate estimates of vertical profiles of electron acceptors and their reduced species are important to determine the mobility and bioavailability of trace metals in the sediments, the model has potential application to assess the stability of selected trace metals in the sediments.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.53-64
• /
• 2007

The dynamic release behavior of Cs from high burn-up spent PWR fuel was experimentally performed under the conditions of a thermal treatment process such as voloxidation and sintering conditions. In voloxidation process, influence of the oxidation and reduction atmosphere on the Cs release characteristic using fragment type of spent fuel heated up to $1,500^{\circ}C$ was compared. In sintering process, temperature history effect on Cs release behavior was evaluated using green pellet under 4% $H_2/Ar$ environment. Temperature range for complete Cs release from spent fuel fragment under voloxidation condition was about $800^{\circ}C{\sim}1,200^{\circ}C$, but that of green pellet under the reduction atmosphere was $1,100^{\circ}C{\sim}1,400^{\circ}C$. Key parameters on Cs release behavior from spent fuel was powder formation as well as the diffusion rate of Cs compound to grain boundary and fuel surface.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.71-77
• /
• 2011

$MoO_3$ powders were reduced to $MoO_2$ under Ar+$H_2$ gas mixture in a tubular furnace at temperature range 723~873 K. Reaction rate was quantitatively deduced by measuring relative humidity of off gas. Observed reaction rate increased significantly with hydrogen partial pressure and reaction temperature and the rate of $H_2O$ evolution increased drastically during the initial period of reduction. As reduction proceeded, however, $H_2O$ partial pressure decreased noticeably. During the initial period of the reduction, a linear relationship for time dependence of the reduction fraction was observed. The activation energy for the reduction of $MoO_3$ to $MoO_2$was 73.56 kJ/mol during the initial period of reduction.

• Resources Recycling
• /
• v.28 no.1
• /
• pp.47-54
• /
• 2019

In this study, the wastes were used as fuels for direct reduction iron (DRI) production to reduce production cost and recycle the wastes. We examined the effects of wastes on the reduction behavior of DRI manufacture and the possibility of using wastes as auxiliary fuels. The proximate and Ultimate analysis were carried out to confirm the properties of wastes as fuels, and high-quality reduced irons were fabricated by using the waste as an auxiliary fuel. The metallization of reduced irons increased as the calorific value increase of auxiliary fuel. Especially, the reduced irons fabricated from the waste tires and vinyl plastics which had high heat energy and volatile matters showed higher metallization than the others. The high calorific value and volatility of waste were significant properties as fuel. The high quality DRI could be fabricated with wastes as auxiliary fuels through optimization of reaction conditions.