• Journal of Life Science
• /
• v.17 no.10
• /
• pp.1309-1314
• /
• 2007

Investigation on health conditions of Thai koi (Anabas testudineus) were carried out through clinical and histopathological observations from different farms of Mymensingh district for seven months during August 2006 to February 2007. Fish sampling and water quality parameters (temperature, dissolved oxygen and pH) were monitored on a monthly basis. Clinical examination of fishes was also carried out for any kind of abnormalities at monthly intervals. Samples of skin, muscle, gill, liver and kidney were observed by histological technique. Among the water quality parameters the values of water temperature, dissolved oxygen were found to be at unfavorable level for fish during the colder months in the farms. Clinically it was observed that fishes were more affected from December to January and almost normal in appearance during August to September and February. Different clinical symptoms like scale loss, dermal lesion, ulcer and loss of caudal fin were noticed in December and January. In histopathological study, structures of fish organs were normal from August to September. In the months of October and November, minor pathologies were found to be started. Marked pathological changes like necrosis, pyknosis, inflammation, hemorrhage, hypertrophy, hyperplasia, missing of primary and secondary gill lamellae were observed in the months of December and January. Whereas, in the month of February the pathological condition of fish gradually reduced. Again when considered individual fish farm, fishes of Reliance Aqua Farm were more affected than Sotota Matshya Hatchery. The study showed that severity of clinical and pathological changes were increased in December and January. During the period EUS and protozoan diseases were noticed in A. testudineus of the investigated farms.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.11-21
• /
• 2014

The purpose of this study was to furnish basic information for forest community ecology and to accumulate vegetational datum related to hierarchy of forest community for the efficient management of forest vegetation in Mt. Mani. Samples were collected and analyzed by 32 releves from August to October in 2010 using phytosociological analysis methodology of Z-M school and importance value analysis. The results were summarized that the forest vegetation was classified into 5 units in total. Importance value at vegetation unit 1 indicated Pinus densiflora 54.31 (18.10%), Quercus mongolica 39.21 (13.07%), Carpinus coreana 37.29 (12.43%), at vegetation unit 2 Quercus mongolica 89.43 (22.23%), Rhododendron mucronulatum 57.75 (14.43%), Carpinus coreana 47.19(11.80%), at vegetation unit 3 Styrax japonica 53.97 (13.50%), Acer mono 33.60 (8.40%), Carpinus coreana 26.48 (6.62%), Quercus serrata 22.51 (5.64%), at vegetation unit 4 Carpinus coreana 47.70 (11.92%), Quercus acutissima 38.40 (9.60%) and at vegetation unit 5 Evodia daniellii 80.59 (20.14%), Robinia pseudoacacia 35.00 (8.74%), Pueraria thunbergiana 28.63 (7.15%), Quercus dentata 28.20 (7.05%) in the order, respectively.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.199-207
• /
• 2016

This study was conducted to develop a forest fire occurrence model using meteorological characteristics for practical forecasting of forest fire danger rate by reflecting the climate change for the time period of 2000yrs. Forest fire in South Korea is highly influenced by humidity, wind speed, temperature, and precipitation. To effectively forecast forest fire occurrence, we developed a forest fire danger rating model using weather factors associated with forest fire in 2000yrs. Forest fire occurrence patterns were investigated statistically to develop a forest fire danger rating index using times series weather data sets collected from 76 meteorological observation centers. The data sets were used for 11 years from 2000 to 2010. Development of the national forest fire occurrence probability model used a logistic regression analysis with forest fire occurrence data and meteorological variables. Nine probability models for individual nine provinces including Jeju Island have been developed. The results of the statistical analysis show that the logistic models (p<0.05) strongly depends on the effective and relative humidity, temperature, wind speed, and rainfall. The results of verification showed that the probability of randomly selected fires ranges from 0.687 to 0.981, which represent a relatively high accuracy of the developed model. These findings may be beneficial to the policy makers in South Korea for the prevention of forest fires.

• Korean Journal of Weed Science
• /
• v.14 no.2
• /
• pp.120-127
• /
• 1994

To establish an efficient herbicide screening method for purple nutsedge(Cyperus rotundus) control, its sprouting characteristics, tuber production and responses on several herbicides were investigated under greenhouse condition. The tubers stored at $4^{\circ}C$ after sterilization with the diluted prochloraz(Spotac) solution showed higher sprouting than the non-sterilized did. The harvested tubers were not dormant, and the sterilized tubers which stored at low temperature had a sprouting capability of about 80% after 6 months. If the fresh weight of purple nutsedge tubers was decreased to below 48%, they could not sprout. However, the tubers soaked in water and then stored at low temperature could sprout by 88% even 6 months later. Sprouting and initial growth of tuber were much better at $35^{\circ}C$-day/$25^{\circ}C$-night than at 30/$20^{\circ}C$ or 25/$15^{\circ}C$. The half-sected tubers, which were prepared by setting the intact tuber of above 1.2g latitudinally, were shown similar initial growth to the intact but those sected crucifically were not. These results suggest that the half-sected tuber itself can be used as a material on herbicide screening. About 1000 tubers could be harvested when 10 tubers planted in a pot($56{\times}35{\times}16cm$) filled with the artificial soil were cultivated in greenhouse of $35^{\circ}C$-day/$25^{\circ}C$-night for 3 months(April-July, 1993). Chlorimuron, Bentazon and Norflurazon were selected as the standards for the screening because of providing relatively effective control on purple nutsedge in both soil-surface and foliar spray treatment.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.411-415
• /
• 2009

Some microorganisms are capable of leaching Mn(II) from nonsulfidic manganese ores indirectly via nonenzymatic processes. Such reductive dissolution requires organic substrates, such as glucose, sucrose, or galactose, as a source of carbon and energy for microbial growth. This study investigated characteristics of Mn(II) leaching from manganese nodules by using heterotrophic Bacillus sp. strain MR2 provided with corn starch as a less-expensive substrate. Leaching of Mn(II) at 25.6 g Mn(II) $kg^{-1}$ nodule $day^{-1}$ was accompanied with cell growth, but part of the produced Mn(II) re-adsorbed onto residual $MnO_2$ particles after 24 h. Direct contact of cells to manganese nodule was not necessary as a separation between them with a dialysis tube produced similar amount [24.6 g Mn(II) $kg^{-1}$ nodule $day^{-1}$]. These results indicated an involvement of extracellular diffusible compound(s) during Mn(II) leaching by strain MR2. In order to optimize a leaching process we tested factors that influence the reaction, and the most efficient conditions were $25\sim35^{\circ}C$, pH 5~7, inoculum density of 1.5~2.5% (v/v), pulp density of 2~3 g/L, and particle size <75 ${\mu}m$. Although Mn(II) leaching was enhanced as particle size decrease, we suggest <212 ${\mu}m$ as a proper size range since more grinding means more energy consumption The results would help for the improvement of bioleaching of manganese nodule as a less expensive, energy-efficient, and environment-friendly technology as compared to the existing physicochemical metal recovery technologies.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.593-602
• /
• 2006

Species composition, spatial distribution of major species, diameter and height classes distribution, and species diversity were .analyzed in the Korean red pine (Pinus densiflora, hereafter referred as pine) forest in the permanent quadrats, which were designed for Long Term Ecological Research (LTER). Collected data were compared with those from the other areas including urban center (Mt. Inwang and Hongneung) and boundary areas (Mts. Acha, Bukhan, Bulam, Cheonggye, Daemo, and Surak), and natural areas (Mts. Seolak, Songni, and Wolak) to clarify the ecological characteristics of pine forest on Mt. Nam. Species composition of pine forest on Mt. Nam showed a similarity with those of urban center but did a little and big differences with those on urban boundary and natural areas, respectively. Such differences that pine forest on Mt. Nam showed, were usually due to Styrax japonicus, Sorbus alnifolia, Oplismenus undulatifolius, Ailanthus altissima, Ageratina altissima and so on, which showed higher coverage there. Predicted from diameter and height classes distribution of tree species, pine forest on Mt. Nam showed a possibility to be replaced by a S. japonica. Considered that this replacer species is not only a sub-tree but also shade intolerant, such successional trend could be interpreted as a sort of retrogressive succession. Those on urban boundary and natural areas showed a difference by displaying probabilities to be maintained as themselves as an edaphic climax or succeeded to oak forests. Species diversity of pine forest on Mt. Nam was lower than those in urban boundary and natural areas due to excessive dominance of several species, which led to different species composition from the other areas. Plants, which produced the differences, were species that flourishes in the polluted industrial area (S. japonica and S. alnifolia), favors the disturbed site (O. undulatifolius), and exotic species (A. altissima and Eupatorium rugosum). Those results reflects that pine forest of Mt. Nam was exposed on severe environmental pollution and excessive human interferences.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.131-135
• /
• 2006

Oligopeptide is known to be an essential nitrogen nutrient for bacterial growth. Oligopeptide can be transported into cytoplasm by a specific transport system, Opp system. Opp system is composed of five proteins, which are transcribed by an operon. These are responsible for oligopeptide binding protein (OppA), permease (OppB and OppC) and energy generation system (OppD and OppF), respectively. Previously, we isolated the opp operon from Vibrio fluvialis and constructed the oppA mutant by allelic exchange method. In this study, we investigated the growth pattern and biofilm production under the different growth condition. When the cells were cultivated using brain heart infusion(BHI) medium, the wild type was faster than the mutant in growth during the exponential phase. However, it showed that the growth pattern of two strains in M9 medium is very similar. The growth of wild type showed better than that of the mutant grown at pH 8. At pH 7, there was no an obvious difference in growth. After 5 mM $H_2O_2$ was treated to the cells $(OD_{600}=1.2)$, the cell survival was examined. The oppA mutation did not affect in survivability. In the presence of $10{\mu}g/ml$ polymyxin B, the biofilm production of the oppA mutant was higher than that of the wild type.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Journal of Intelligence and Information Systems
• /
• v.26 no.3
• /
• pp.37-50
• /
• 2020

Information security has become an important issue in the world. Various information and communication technologies, such as the Internet of Things, big data, cloud, and artificial intelligence, are developing, and the need for information security is increasing. Although the necessity of information security is expanding according to the development of information and communication technology, interest in information security investment is insufficient. In general, measuring the effect of information security investment is difficult, so appropriate investment is not being practice, and organizations are decreasing their information security investment. In addition, since the types and specification of information security measures are diverse, it is difficult to compare and evaluate the information security countermeasures objectively, and there is a lack of decision-making methods about information security investment. To develop the organization, policies and decisions related to information security are essential, and measuring the effect of information security investment is necessary. Therefore, this study proposes a method of constructing an investment portfolio for information security measures using game theory and derives an optimal defence probability. Using the two-person game model, the information security manager and the attacker are assumed to be the game players, and the information security countermeasures and information security threats are assumed as the strategy of the players, respectively. A zero-sum game that the sum of the players' payoffs is zero is assumed, and we derive a solution of a mixed strategy game in which a strategy is selected according to probability distribution among strategies. In the real world, there are various types of information security threats exist, so multiple information security measures should be considered to maintain the appropriate information security level of information systems. We assume that the defence ratio of the information security countermeasures is known, and we derive the optimal solution of the mixed strategy game using linear programming. The contributions of this study are as follows. First, we conduct analysis using real performance data of information security measures. Information security managers of organizations can use the methodology suggested in this study to make practical decisions when establishing investment portfolio for information security countermeasures. Second, the investment weight of information security countermeasures is derived. Since we derive the weight of each information security measure, not just whether or not information security measures have been invested, it is easy to construct an information security investment portfolio in a situation where investment decisions need to be made in consideration of a number of information security countermeasures. Finally, it is possible to find the optimal defence probability after constructing an investment portfolio of information security countermeasures. The information security managers of organizations can measure the specific investment effect by drawing out information security countermeasures that fit the organization's information security investment budget. Also, numerical examples are presented and computational results are analyzed. Based on the performance of various information security countermeasures: Firewall, IPS, and Antivirus, data related to information security measures are collected to construct a portfolio of information security countermeasures. The defence ratio of the information security countermeasures is created using a uniform distribution, and a coverage of performance is derived based on the report of each information security countermeasure. According to numerical examples that considered Firewall, IPS, and Antivirus as information security countermeasures, the investment weights of Firewall, IPS, and Antivirus are optimized to 60.74%, 39.26%, and 0%, respectively. The result shows that the defence probability of the organization is maximized to 83.87%. When the methodology and examples of this study are used in practice, information security managers can consider various types of information security measures, and the appropriate investment level of each measure can be reflected in the organization's budget.