• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.168-175
• /
• 2010

During feeding oxidizer to the engine, vortices are occurred at lower dome of oxidizer tank inside by various working environments and external forces for liquid propellant feeding system of space launch vehicle. To eliminate the vortices or swirls Anti-Vortex Devices(AVD) shall be installed at inside lower oxidizer tank. Using the numerical analysis, we have confirmed the performance of AVD and analyzed the mass flow rate by feeding time and magnitudes of swirls on the free surface of oxidizer or exit surface according to the AVD number and length. Then we could derive the optimal design of the AVD number and length.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.48-54
• /
• 1999

For the high speed linear motor and the transportation device at clean room, a magnetic levitation rail without contact using the repulsive force of permanent magnets was newly developed. The characteristics of repulsive and lateral forces of the magnetic levitating system using permanent magnet was studied and the devised magnetic levitating system was evaluated by analytical and experimental approaches. This system is composed of two fixed guide rails with the rare earth permanent magnet array and a moving unit which is attached two magnet pairs at each sides. Because this system was forcedly levitated by the face to face repulsive forces, levitating air gap length can be repulsive force of an auxiliary magnetic repulsion system on the center of moving unit.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.136-138
• /
• 2013

Current, standards light buoys as maritime traffic safety facilities have 10 different types of buoys and the smallest size of those is 4.4m. Therefore, making for easy replacement and repair parts for the type of small light buoys is proposed. Meanwhile, position reliability of floaters by external forces in the environment fall and stability examination should be considered for prohibiting accidents as loss. In this paper, a new light buoy is analyzed on Encounter Frequency types using commercial program and fluid forces is simulated on cross-sectional shape of the float using two-dimensional Boundary Element Method(BEM).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.17-17
• /
• 2015

세계적으로 최근 국지적 호우에 의한 홍수 및 토사재해가 빈번히 발생하여 인적피해 및 자산피해가 급증하고 있다. 일반적으로 강우에 의해 홍수가 발생되며 하안 및 하천 구조물에 피해를 주는 동시에 월파 및 제방이 붕괴되어 하천에서 제내지로 범람하여 범람피해가 발생된다. 하지만 도시지역에서 발생되는 강우는 불투수 면적비율이 비교적 커 다른 지역보다 최대 침수심이 발생되는 시간이 매우 빠르게 도달하는 환경적 특징이 있다. 또한 선상지 지역에 발달된 도시는 어느 동일한 강우사상에 의해 발생되는 내 외수 범람재해 및 토사재해가 동시에 발생되어 피해가 중첩될 가능성이 매우 크며 피해 리스크 또한 증가하고 있는 추세이다. 따라서 이상기후에 의해 발생되는 재해경감을 위해 기존의 대책 및 새롭게 구축되는 해저드 맵에 대해서 이와 같은 여러 재해 발생 가능성을 충분히 고려된 멀티 해저드 맵 구축이 필요하다. 본 연구에서는 일본 오노시의 지역방재계획을 위한 통합적인 해저드 맵 구축을 위해 내 외수 범람에 의한 피해 및 토석류 발생에 의한 영향평가를 실시하여 두 재해가 동시에 발생 가능한 지역을 대상으로 멀티 해저드 맵 구축 및 피난계획 수립을 목적으로 최근 발생되는 국지적 호우에 대한 예측을 위해 아직 검토대상 지역에 발생하진 않았지만 발생 가능한 강우사상을 추출하기 위해 DAD 분석을 실시하여 가능최대강우량을 산정하여 외력조건으로 사용하였다. 뿐만 아니라 토석류 모델의 현장 적용성 평가를 위해 2011년에 발생된 우면산 토석류 재해를 대상으로 비교 검토를 실시하였으며 본 논문의 주요한 결과를 아래와 같이 나타내었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.281-287
• /
• 2009

In this study, the behavior of breasting dolphin caused by the maximum wave height in the coastal area of Incheon has been investigated. The dynamic deflection, shear stress and moment of pile are analyzed using the coefficient of horizontal subgrade reaction resulted from loading tests for different DWT (Dead Weight Tonnage). The dynamic characteristics of pile in accumulated and dredged soils show almost the same pattern. It is shown that the resistance of dolphin to external load increases as the diameter of pile increases. The bettered pile dolphin is more than 10 times stable than the vertical pile type based on the study of dynamic characteristics of dolphin.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.33-44
• /
• 2014

The preliminary design of suction pile as the supporting system for concrete floating structures was performed for the pilot project of the southwest coast area in Korea. Prior to starting design work, site conditions of the area including ground and hydraulic conditions, and a 100-year return period external force were throughly evaluated. The suction pile for mooring of the offshore floating structures has to satisfy the lateral resistance against external force as well as the penetration ability according to the soil conditions such as soil types, shear strengths, effective stresses, and seepage forces. In the design, the required penetration depths, which were stable for lateral resistance, were evaluated with the diameters of cylindrical suction pile as the final installing ones. And the design suction pressures at each penetrating depths, at which sand boiling did not occur, were assessed through the comparison of penetration and penetrationresistance forces. As a result, it was impossible for suction piles with the diameter range of 3.0~5.0 m to penetrate into required penetration depths. On the other hand, suction piles with the diameter range of 6.0 m and 7.0 m satisfied both the horizontal stability and the penetration ability by design suction pressures at the required penetration depths of 8.5 m and 8.0 m, respectively.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.3
• /
• pp.105-113
• /
• 2017

This paper presents a novel on-line trajectory optimization framework based on automatic time warping, which performs the time warping of a reference motion while optimizing character motion control. Unlike existing physics-based character animation methods where sampling times for a reference motion are uniform or fixed during optimization in general, our method considers the change of sampling times on top of the dynamics of character motion in the same optimization, which allows the character to effectively respond to external pushes with optimal time warping. In order to do so, we formulate an optimal control problem which takes into account both the full-body dynamics and the change of sampling time for a reference motion, and present a model predictive control framework that produces an optimal control policy for character motion and sampling time by repeatedly solving the problem for a fixed-span time window while shifting it along the time axis. Our experimental results show the robustness of our framework to external perturbations and the effectiveness on rhythmic motion synthesis in accordance with a given piece of background music.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.4
• /
• pp.335-343
• /
• 2016

The spatio-temporal distribution of jellyfish in Masan Bay was investigated in this study using a numerical model. First, a three-dimensional hydrodynamic model (POM) was constructed,taking into account residual flows, tides, temperature, salinity, and wind effects. A particle tracking model based on residual flow was then used to investigate the jellyfish present in Masan Port, referred to as the Heavy Industry and Gapo New Port in Masan. Jellyfish distribution was concentrated with maximum (2,533 individual) in the North Sea near Machang Bridge. Itcan be concluded that this concentration was due to multi-directional residual flows and topography effects. Residual flow currents are a dominant factor in understanding the aggregation of jellyfish, and this study used a numerical simulation of tide-induced residual currents, wind-driven currents and density currents in distinct cases to thoroughly address the topic. As a result, wind-driven currents (effect of the wind) was found to be superior to other components as an influence on the distribution of jellyfish near Machang Bridge and Modo in Masan Bay.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.303-307
• /
• 2008

The tug boat is restricted in her maneuvering ability due to the towed barge, and tug-barge has been strongly affected by the external forces, i.e. the wind, wave, currents, and so on. Therefore, it is difficult to get the safety of tug-barge operation. It is necessary for the captain of tug boat, VTS and operation department to develope the system which can keep observing the course, speed and position of the towed barge in actual sea and prevent the marine accidents in advance. In this study, we proposed the basic method to develope the safety towing system for barge using portable GPS which was easily movable and relatively inexpensive. Then we conducted the test on the real barge. As a result, we could obtain diverse navigation data to make a safety towing work. It was noted that these data could be used for carious purposes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.298-303
• /
• 2015

When a disabled ship is being towed in a seaway, the resistance increase of the towed ship caused by both the external conditions such as wave and wind and the hull conditions such as drifting angle, should be accurately predicted. Most of the disabled ships cannot be towed in the front direction of hull, but they are usually towed in drifted direction with some drifting angle. In this sense, the resistance increase caused by the drifting angle is not an element to be ignored. In this paper, various methods for prediction of the resistance increase caused by the drifting angle are studied. In addition, new prediction methods such as front-lateral projected ratio method and empirical formula method by multiple regression analysis have been derived. The front-lateral projected area ratio method has been applied to a computer program for prediction of the towing condition, and this method has been approved to be a useful method in practical situations.