• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.98-105
• /
• 2024

Due to the low accuracy of measured data obtained from low-cost GNSS and IMU devices, it was hard to secure the required accuracy of the measured position and heading angle for autonomous navigation which was conducted by a model-scale marine mobility. In this paper, a localization technique using the Extended Kalman Filter (EKF) is proposed for coping with the issue. First of all, a position and heading angle estimator is developed using EKF with the assumption of a point mass model. Second, the measured data from GNSS and IMU, including position, heading angle, and velocity are used for the estimator. In addition, the heading angle is additionally obtained by comparing the LiDAR point cloud with map information for a temporal water tank. The newly acquired heading angle is integrated into the estimator as an additional measurement to correct the inaccuracy in the heading angle measured from the IMU. The effectiveness of the proposed approach is investigated using data acquired from preliminary tests of the model-scale autonomous marine mobility.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.110-116
• /
• 2005

It is very important to reduce the computational processing time for the application of the vision system in real time such as inspection, the determination of object's dimension and welding etc, because the vision system model involves a lot of measurement data acquired by CCD camera. Also, a lot of computation time is required in estimating the parameters in the vision system model if the iterative batch estimation method such as Newton Raphson is used. Thus, the effective computation method such as the Extended Kalman Filtering(EKF) is required to solve the above problems. The EKF has much advantages in that it takes explicitly into account the measurement uncertainties, and is a simple and efficient recursive procedures. Thus, this study is to develop the EKF algorithm to compute the parameters in the vision system model in real time. This vision system model involves the six parameters to account for the cameras inner and outer parameters. Also the EKF is applied to estimate the object's dimension. Finally, practicality of the estimation scheme of the vision system based on the EKF is verified experimently by performing the estimation of object's dimension.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.7-14
• /
• 2008

Unmanned vehicle has a performance for finding the path and the way point by itself, so called orientation and direction. For the more precise navigation performance, Extended kalman filter, which is integrated with inertial navigation system and global positioning system is proposed in this paper. Extended kalman filter's performance is evaluated by the simulation and applied to the unmanned vehicle. The test result shows the effectiveness of Extended kalman filter for the navigation.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.244-245
• /
• 2012

본 논문에서는 이산 웨이블릿 변환(DWT;discrete wavelet transform)의 다해상도 분석(MRA;multi-resolution analysis)을 통해 분해된 배터리의 저주파 전압 성분(approximation;$A_n$) 기반 SOC(State-of-charge) 추정방법을 소개한다. 급격한 전압 변화의 특성을 나타내는 고주파 전압 성분(detail;$D_n$)이 제거되고 저주파 전압 성분만이 SOC 추정을 위해 사용된다. 이 경우 기존 확장 칼만필터(EKF;extended Kalman filter)에서 SOC 추정에러를 개선하기 위해 사용되었던 노이즈 모델의 생략이 가능하여 알고리즘의 복잡성이 개선된다. 개선된 확장 칼만필터 기반 SOC 추정 결과를 통해 제안된 방법을 검증하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.6
• /
• pp.829-836
• /
• 2006

The reaction rate of denitrification is primarily affected by the utilization of organics that are usually limited in the anoxic period in a sequencing batch reactor. It is necessary to add an extemal carbon source for sufficient denitrification. An adaptive model of state-space based on the extended Kalman filter is applied to manipulate the dosage rate of extemal carbon automatically. Control strategies for denitrification have been studied to improve control performance through simulations. The normal control strategy of the constant set-point results in the overdosage of external carbon and deterioration of water quality. To prevent the overdosage of external carbon, improved control strategies such as the constrained control action, variable set-point, and variable set-point after dissolved oxygen depletion are required. More stable control is obtained through the application of the variable set-point after dissolved oxygen depletion. The converging value of the estimated denitrification coefficient reflects conditions in the reactor.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.447-456
• /
• 2015

Continuous as well as discrete measurement of the track geometry based on a track trolley are investigated to enhance the efficiency of the trolley and to minimize the measurement errors. A new kinematic model based on the track coordinates involving transition and circular curves is developed to improve the accuracy of the measurement; a nonlinear Extended Kalman Filter (EKF) is employed to linearize the governing equations. The proposed model is verified with the ideal track geometry in terms of both discrete and continuous measurement. Comparison with the previous models is also made to prove the applicability of the kinematic model.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.219-230
• /
• 2017

This paper proposes a vehicle to road tracking algorithm based on vision sensor by using EKF(Extended Kalman Filter). The lateral offset, heading angle, and curvature which are obtained from vehicle to road tracking might be used as inputs to steering controller of LKAS(Lane Keeping Assist System) or for the warning decision logic of LDWS(Lane Departure Warning System). To the end, in this paper, the yaw rate, steering angle, and vehicle speed as well as lane raw points together with considering of vehicle lateral dynamics are utilized to improve the exactness and convergence of the vehicle to road tracking. The proposed algorithm has been tested at a proving ground that consists of straight and curve sections and compared with GPS datum using DGPS-RTK equipment to show the feasibility of the proposed algorithm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.659-666
• /
• 2016

Magnetic disturbance is one of the main factors that deteriorate the accuracy of orientation estimation methods based on inertial/magnetic sensor signals. This paper proposes a parallel Kalman filter(KF) that explicitly detects magnetic disturbances and thus can accurately estimate 3D orientation in magnetically disturbed environments. Due to the parallel nature of the proposed KF, even severe magnetic disturbances only affect yaw estimation, while roll and pitch values remain accurate. Consequently, the proposed KF can be effectively used in various applications that involve magnetically inhomogeneous environments, such as robots, ships, and planes.

• Journal of Korea Game Society
• /
• v.12 no.3
• /
• pp.87-96
• /
• 2012

This paper presents a novel EKF(Extended Kalman Filter) based SLAM(Simultaneous Localization And Mapping) system for stable camera tracking and re-localization. The obtained 3D points by SLAM are triangulated using Delaunay triangulation to establish a reference plane, and features are described by BRISK(Binary Robust Invariant Scalable Keypoints). The proposed method estimates the camera parameters from the homography of the reference plane when the tracking errors of EKF SLAM are much accumulated. Using the robust descriptors over sequence enables us to re-localize the camera position for matching over sequence even though the camera is moved abruptly.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.131-138
• /
• 2016

In order to improve the performance of an extended Kalman filter, a simplified indirect inference method (SIIM) fuzzy logic system (FLS) is proposed. The proposed FLS is composed of two fuzzy input variables, four fuzzy rules and one fuzzy output. Two normalized fuzzy input variables are the variance between the trace of a prior and a posterior covariance matrix, and the residual error of a Kalman algorithm. One fuzzy output variable is the weighting factor to adjust for the Kalman gain. There is no need to decide the number and the membership function of input variables, because we employ the normalized monotone increasing/decreasing function. The single parameter to be determined is the magnitude of a universe of discourse in the output variable. The structure of the proposed FLS is simple and easy to apply to various nonlinear state estimation problems. The simulation results show that the proposed FLS has strong adaptability to estimate the states of the incoming/outgoing moving objects, and outperforms the conventional extended Kalman filter algorithm by providing solutions that are more accurate.