• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.734-742
• /
• 2000

This paper presents a new volumetric approach to 3D object recognition by using PBSM (part-based superquadric model). The assembly part object can be constructed with the set of volumetric primitives and the relationships between them. We describe volumetric characteristics of the model object with superquadric parameters. In addition, our model base has the relationships between volumetric primitives as well as the surface information : the surface type, the junction type between neighboring surfaces. These surface properties and relationships between parts are effectively used in recognition process. Our integrated method is robust to recognition of the identity, position, and orientation of randomly oriented assembly parts. Furthermore, we can reduce the effects of self-occlusion and non-linear shape changes according to viewpoint. In this paper, we show that our integrated method is robust to recognition of the identity, position, and orientation of randomly oriented assembly parts through experimental results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4A
• /
• pp.303-309
• /
• 2011

Laminated rubber bearing is the most commonly used device for seismic base isolation of bridge structures. It is important to know performance and behavior characteristics of the laminated rubber bearings. The main evaluation factors of the rubber bearing are classified as compressive, shear and tensile behavior characteristics. The reference data of compressive and shear characteristics are rich, but the reference data of tensile characteristics is scarce. In this study, tensile test results of the rubber bearing with variation of shape factor and shear deformation are investigated for mechanical property. When tensile deformation in normal condition is increasing, tensile cycle behavior curve becomes non-linear and tensile breaking point is 300%. On the other hand, tensile breaking point is shear deformation condition is about 40%. Furthermore, when shape factor is lower, tensile breaking point is decrease. This results mean that tensile breaking point is decreased in triaxial tensile deformation because of cracks caused by internal void of the rubber bearings. This experimental data can be used as the reference data of tensile characteristics for designing seismic isolation of structures.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.80-91
• /
• 1999

We present various optimal grating structures which give the low threshold gain, good modulation characteristics, small effective linewidth enhancement factor, and large fabrication tolerance in complex-coupled MQW DFB lasers with absorptive gratings. To obtain these, we calculate the complex coupling coefficients using the extended additional layer method and the threshold gain including the modal loss in the absorptive grating region for rectangular and trapezoidal gratings. Based on the comparison of the results for various possible absorptive grating structures, the design guidelines are presented to obtain the low threshold gain or large fabrication tolerance. Among the grating structures studied, the double grating structure consisting of the absorptive grating on the index grating has the largest fabrication tolerance for the threshold gain and the coupling strength. The fabrication tolerance for the coupling ratio is very large for all the grating structures studied.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.19-27
• /
• 1993

Recent work in the mechanics of fracture points out the desirability of a knowledge of the elastic energy release rate, the crack extension force, and the character of the stress field surrounding a crack tip in analyzing the strength of cracked bodies. The objective of this work is to provide a discussion of the energy rates, stress fields and the like of various cases for anisotropic elastic bodies which might be of interest. Reinforced concrete, wood, laminates, and some special types of elastic bodies with controlled grain orientation are often orthotropic. In this paper, determination of the stress intensity factors(SIFs) of orthotropic plane elastic body using crack tip singular element and fine mesh in near the crack tip is performed. A numerical method in this paper was used by displacement correlation method. A numerical example problem of an orthotropic cantilevered single edge cracked elastic body subjected to shear loading was analyzed, and the results of this paper are in good agreement with those of the others.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1061-1071
• /
• 2015

In the present study, the Navier-Stokes (N-S) equations delineating water flows inside porous media were derived applying Reynolds transport theorem in order to provide a basis for analyzing water wave problems inside the porous media. Then, the derived N-S equations were compared with the same species of equations in existing researches. Based on the N-S equations, a set of Boussinesq equations was then derived in such a form that the dispersiveness and nonlinearity of water waves inside the porous media can be properly reproduced. Finally, numerical analyses were carried out to demonstrate the validity of the equations. The reflection and transmission coefficients of porous breakwaters were calculated and compared with the results of existing hydraulic experiments. The numerical results showed a rather sensitive dependency on the virtual mass coefficient of grains constituting the porous media. The selection of the coefficient with zero turned out to give nice agreements with numerical and experimental results.

• Journal of the Korean association of regional geographers
• /
• v.8 no.4
• /
• pp.480-491
• /
• 2002

The purpose of this study is to construct interregional input-output table for multi-regions using non-survey methods. Despite of wide use of interregional input-output table, there have been continuing debates with respect to it's accuracy mostly when it is constructed by non-survey method. The best ideal one is to construct through real survey, while we must pay much time and cost. With regard to this concern, Hulu and Hewings developed a step by step method for the estimation of interregional input coefficients for the Indonesian economy which might be a challenge for the limitation of location quotient method, for which Round pointed out earlier. A five regions interregional input-output table for Korea is developed in this study by expanding Location Quotient method. Some development was made, however, according to the degree of collection of data and the assumption in treating the interregional flows. Finally, a comparison was made for the accuracy of input coefficients between the real surveyed and derived ones.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1229-1237
• /
• 2013

In this study, the theory of spherical indentation based on incremental plasticity is extended to an indentation method for evaluating creep properties. Through finite element analysis (FEA), the point where the elastic strain effect is negligible and the creep strain gradient constant is taken as the optimum point for obtaining the equivalent strain rate and stress. Based on FE results for spherical indentation with various values of creep exponent and creep coefficient, we derive by regression an equation to calculate creep properties using two normalized variables. Finally a program is generated to calculate creep exponent and creep coefficient. With this method, we obtain from the load-depth curve creep exponents with an average error of less than 1.5 % and creep coefficients with an average error of less than 1.0 %.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.2
• /
• pp.287-296
• /
• 2011

Thirty six female students participated in the experiment of the fat mass weight loss. they kept diary for foods they ate every day, took a picture of the foods, transmitted the picture to the experimenter by the camera phone, and consulted him about fat mass loss once a week for 8 weeks period. Fat mass weight and its related factors of the students had been measured repeatedly every week during 8 weeks, The repeated measurement data were used for applying various random coefficient models. And hence optimal random coefficient model was selected. From the optimal model, the baseline, body mass index, diastolic blood pressure, total cholesterol and time of the fixed factors were very significant. The fixed quadratic time effect existed. The variance components corresponding to the subject effect, linear time effect of the random coefficients were all positive. Thus random coefficients up to the linear terms were considered as the optimal model. The treatment effect reduced the weight loss to an average of 2.1kg at the end of the period.

• Journal of the Korean association of regional geographers
• /
• v.14 no.4
• /
• pp.367-381
• /
• 2008

The purpose of this paper is to analyze the change in the distribution and hierarchical structure of commercial land use. Tools for analyzing the spatial structure are index of concentration, coefficient of localization and location quotient. This research is applied to Daegu, focusing on the period 1985-2003. During the 1985-2003 period, the growth rate of commercial land use volume amounted to 330%, compared with a population growth rate of 118%. The biggest component of commercial land use is the retail sector. As the lodging, medical, transportation-warehouse and entertainment sectors have the propensity for concentration and comprise the specialized commercial areas in the suburbs, the other sectors arc evenly distributed. Jung-gu has functioned as a downtown core in the hierarchical structure of commercial areas. So, in the structure of commercial land use, Daegu has continued to be a single nuclear structure. But, Dongdaegu Station influence area has evolved into the second order center since 2000. This is the sign of change in spatial structure from single-nuclear pattern to multi nuclear pattern.

• Journal of Korea Water Resources Association
• /
• v.51 no.7
• /
• pp.575-584
• /
• 2018

An increase in heavy rainfall and floods have been observed over South Korea due to recent abnormal weather. In this perspective, the high-resolution weather forecasts have been widely used to facilitate flood management. However, these models are known to be biased due to initial conditions and topographical conditions in the process of model building. Theretofore, a bias correction scheme is largely applied for the practical use of the prediction to flood management. This study introduces a new mean field bias correction (MFBC) approach for the high-resolution numerical rainfall products, which is based on a Bayesian Kriging model to combine an interpolation technique and MFBC approach for spatial representation of the error. The results showed that the proposed method can reliably estimate the bias correction factor over ungauged area with an improvement in the reduction of errors. Moreover, it can be seen that the bias corrected rainfall forecasts could be used up to 72 hours ahead with a relatively high accuracy.