• Korean Journal of Food Science and Technology
• /
• v.18 no.1
• /
• pp.61-65
• /
• 1986

This study was performed to examine the drying characteristics of apples at various drying conditions. Air velocity has no effect on the drying rate except the constant rate period. In this experiment the diffusion coefficients of moisture in the apple tissue were in the range of $1.1470-2.2148{\times}10cm^2/sec$. As a result of balance of heat and mass transfer during the falling rate period. an empirical equation based on Fick's law was obtained as follows; $log{\Delta}t\;=\;log\;t_o\;-\;D{\frac{{\pi}^2{\theta}}{4d.}}$ This equation can be used to calculate the temperature of apples during the falling rate period, provided the diffusion coefficients of apple are known. The experimental values of the internal moisture distribution during apple dehydration were nearly in accord with the theoretical values.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.153-161
• /
• 1997

In the concrete st~uctures exposed to the environmental condition, the water movement is occurred by thc moisture difilsion, and the rnoisturrt distribution in concwt.c is nonunifhrm. Such a non-unif'orm moisture distribution causes tht. diflbrent.ia1 drying shrinkage in concrete structures. From this typc. of' dif'fercntial drying shrinkagr' tensiit-1 stress is occurred in exposure surface of concrete structures. and may result in crack formation. This residual stress is significantly affected by the creep of concrete, and the differential creep is also occurred at the cross section of concrete structures due to moisture difference at each locations. In this study, based on the moisture diffusion theory, a finite element program which is capable of simulating the moisture distribution in concrete was developed. And the analysis method for the differential drying shrinkage was suggested, in which the differential creep was considered. The differential drying shrinkage strain was also measured at various positions of concrete. Finally the validity of analysis method was proved by comparing test results with analytical results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.380-385
• /
• 2006

In this paper, a program that can be utilized to measure and analyze radio propagation characteristics is developed. This program is able to control the measurement instruments including spectrum analyzer through GPIB interface and analyze the measured data to yield mean excess delay and RMS delay spread. The measured path loss can be compared with theoretical value in free space or inside a tunnel. The measured and analyzed results can also be presented in the forms of graphs. As these tasks can be conducted on the spot of the measurements, this program is very helpful in performing and verifying the measurements immediately. In this thesis radio propagation characteristics with frequency bands of 2.45 and 5.8GHz in subway tunnels are measured by using the program. Path loss and delay spread in subway tunnel is measured and compared according to the form of antenna beam and LOS(Line of Sight) and N-LOS(Non-Line of Sight).

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.543-548
• /
• 2002

It has been known that the DCMP(Directionally Constrained Minimization of Power) and the ZF(Zero Forcing) can improve the SINR performance of an array antenna system by using spatial signature of wireless channel. This paper analyzes the performance of DCMP and ZF in multiple scattering environments. To obtain the spatial signature of wireless channel. both DOA(Directional of Arrival) and AS(Angular spread) of the received signals were estimated by using ESPRIT. The performance of the DCMP and the ZF was analyzed theoretically. By computer simulation of SINR performance was evaluated.

• Journal of Energy Engineering
• /
• v.17 no.2
• /
• pp.100-106
• /
• 2008

Flameless fiber mat catalytic burners have been known as an effective heat source in industrial drying processes since heat obtained from combustion can be transferred to absorptive body by far-infrared radiation. In order to extend the application of fiber mat catalytic burner, novel fiber mat catalytic burners were manufactured and combustion characteristics of them were investigated. For diffusive catalytic burners, the efficiency of combustion was significantly affected by the installation direction and the temperature of catalytic bed perimeter influenced on the diffusion rate of oxygen which determined the combustion efficiency of catalytic burner. It was seen in premixed catalytic combustion that air content in premixed fuel gas was optimized at slightly higher than theoretical amount of air. Combustion heat released higher than 70% by radiant heat in premixed catalytic combustion likewise diffusive catalytic combustion.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.4
• /
• pp.158-167
• /
• 2007

Indirect illumination plays an important role for realistic image synthesis. We present a novel realtime indirect illumination rendering technique using image pyramids. Hundreds of thousands of indirect point light sources are stored into images, and then they hierarchically clustered into quad-tree image pyramids. We also introduce a GPU based top-down and breadth-first traversal of the quad-trees to approximate the illumination with clusters (set of lights). All steps entirely run on the GPU in real-time. Result images demonstrate that our method represents diffuse interreflection, especially a color bleeding effect well. We achieved interactive frame rates of tens to hundreads, without any preprocessing. We can avoid artifacts caused by sampling, and our method is seven times faster than a recently proposed sampling based method.

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.537-546
• /
• 2020

This study deals with the development and improvement of a particle dispersion model for quick response to water pollutant accidents. The developed model is based on the shear dispersion theory where vertical mixing is done by step by step mixing by vertical and molecular diffusion algorithm. For the quick response to chemical accidents, an algorithm for multi-core modeling for the particle dispersion model is applied. After the application of multi-core operation using OpenMP directives to the model, the relation for the calculation time and particle size were determined along with the number of cores used for parallel programming to determine the model time for chemical accident responses. The results showed the adequate conditions for the modeling of chemical accidents for quick response and to increase the applicability of the model.

• Journal of Industrial Convergence
• /
• v.20 no.7
• /
• pp.31-36
• /
• 2022

There is a growing perception that HR management that streamlines corporate resources is necessary to retain competitive advantage. In this study, data-based HR management is focused on the perception of HR job experts and data-based HR management execution and utilization prospects at corporate sites. The subjects of the study were three HR planning/management job experts of three firms specializing in IT services in Pangyo, and focused on identifying data-based HR management execution, measurement, analysis tools, and utilization level. As a research method, open coding, axis coding, selective coding procedure based on evidence theory was presented. As a result of in-depth interviews, corporate HR management measurement indicators were divided into three areas: employee, productivity, and culture. Through this study, it was possible to find the significance of perception of the company site as to what measurement tools and mechanisms the company implemented and measured the effectiveness and efficiency of HR management.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.4
• /
• pp.547-567
• /
• 2022

In this study, I focus on makerspaces, which have rapidly spread since the late 2000s in the world's major cities. Makerspaces, born amid great social change, reflect the core characteristics of industrial space. I analyze the makerspace based on the theoretical perspectives of urbanism in the macroscopic aspect and placeness in the microscopic aspect. The urbanism of makerspaces is manifested through entry into the inner cities and their connections with urban capabilities. This means that convergence with innovation factors is becoming more important than optimization of factor costs and agglomeration economies in the locational determinants of industrial space. The placeness of makerspaces is being re-formed through an emphasis on taste, the expansion of autonomy, and the strengthening of connections. This reveals how the value creation process within the industrial space is changing, from forming-placelessness through standardization, uniformity, and compartmentalization to forming-placeness through restoration of individual humanity and interaction. The results of the urbanism and placenesss analysis carry implications for the present moment, when it is necessary to diversify the spatial planning of industrial spaces.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.193-203
• /
• 2024

In a situation where news usage through YouTube is rapidly increasing, this study investigated which attributes of issues news producers prominently report on based on the two-stage agenda setting theory to empirically investigate the influence of various news producers on YouTube. Through the research results, we confirmed that broadcasters have the influence to set the agenda and form public opinion on YouTube, and discovered the possibility of a two-stage agenda setting effect occurring in the YouTube environment. We criticized whether news producers abuse emotional words due to their partisanship when reporting political issues, and discussed that an emotional approach to political issues can have a negative impact on news users' perception of reality.