• Journal of the Korean Chemical Society
• /
• v.47 no.3
• /
• pp.237-240
• /
• 2003

A synthetic method for the title compounds (2a-o) was carried out. The title compounds (2a-o)were prepared by the condensation of various thioureas and maleic anhydride. Anti-inflammatory activities in vivo were evaluated and compared with standard drug diclofenac sodium. Some compounds showed moderate activity. The structures of all the new compounds were established on the basis of $^1H$ NMR and IR spectral data.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.5 s.248
• /
• pp.405-412
• /
• 2006

In order to realize a stably propagating flame in a narrow channel, flame instabilities resulting from flame-wall interaction should be avoided. In particular flame quenching is a significant issue in micro combustion devices; quenching is caused either by excessive heat loss or by active radical adsorptions at the wall. In this paper, the relative significance of thermal and chemical effects on flame quenching is examined by means of quenching distance measurement. Emphasis is placed on the effects of surface defect density on flame quenching. To investigate chemical quenching phenomenon, thermally grown silicon oxide plates with well-defined defect distribution were prepared. ion implantation technique was used to control defect density, i.e. the number of oxygen vacancies. It has been found that when the surface temperature is under $300^{\circ}C$, the quenching distance is decreased on account of reduced heat loss; as the surface temperature is increased over $300^{\circ}C$, however, quenching distance is increased despite reduced heat loss effect. Such abberant behavior is caused by heterogeneous surface reactions between active radicals and surface defects. The higher defect density, the larger quenching distance. This result means that chemical quenching is governed by radical adsorption that can be parameterized by oxygen vacancy density on the surface.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.5 s.248
• /
• pp.397-404
• /
• 2006

Effects of surface defect distribution on flame instability during flame-surface interaction are experimentally investigated. To examine chemical quenching phenomenon which is caused by radical adsorption and recombination processes on the surface, thermally grown silicon oxide plates with well-defined defect density were prepared. ion implantation technique was used to control the number of defects, i.e. oxygen vacancies. In an attempt to preferentially remove oxygen atoms from silicon dioxide surface, argon ions with low energy level from 3keV to 5keV were irradiated at the incident angle of $60^{\circ}$. Compositional and structural modification of $SiO_2$ induced by low-energy $Ar^+$ ion irradiation has been characterized by Atomic Force Microscopy (AFM) and X-ray Photoelectron Spectroscopy (XPS). It has been found that as the ion energy is increased, the number of structural defect is also increased and non-stoichiometric condition of $SiO_x({\le}2)$ is enhanced.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.61-71
• /
• 1988

본 논문에서는 Laser Rayleigh Pyrometer에 의한 광학계의 개조와 측정기술을 발전시켜 지금까지의 측정이 불가능한 밀폐용기내에서 분출화염의 온도측정을 시도하여 분출화염에 의한 착화나 소염의 연구에 중요한 자료를 얻고자 하는데 있다. 밀폐용기내에서의 온도측정은 대기개방형에서와 같이 Laser의 에너지를 증대시키기 위해 이용한는 다중반사 Mirror가 사용될 수 없을 뿐만 아니라 약한 Rayleigh산란빛에 의하여 입사창이란 Laser Trap으로 발생하는 강한 배경광 및 분출화염 뿐만 아니고 착화된 화염에서 대량의 화학발광은 피할 수 없다. 본 논문은 이와 같은 영향을 제거하는데 노력하여 밀폐용기내의 연소장에서 온도를 측정하였으며 또 측정가능성을 시사하였다.

• Journal of the Korean Society of Combustion
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2005

Incomplete combustion due to quenching in a narrow confinement has been a major problem for realization of a reliable micro combustion device. In most micro combustors, effects of flows are absent in the quenching because the flow is laminar and no severe stretch is present. In such circumstance, quenching is caused either by heat loss or by removal of active radicals to the wall surface of the confinement. An experimental investigation was carried out to investigate the relative significance of these two causes of quenching of a premixed flame. A premixed jet burner with a rectangular cross section at the exit was built. At the burner exit, the flame stands between two walls with adjustable distance. The gap between the two walls at which quenching occurs was measured at different wall surface conditions. The results were analyzed to estimate the relative significance of heat loss to the wall and the removal of radicals at the surface. The measurements indicated that the quenching distance was independent of the wall surface characteristics such as oxygen vacancy, grain boundary, or impurities at low temperature. At high temperature, however, the surface characteristics strongly affect the quenching distance, implying that radical removal at the wall plays a significant role in the quenching process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.11
• /
• pp.1527-1537
• /
• 1997

Extinction characteristics and acoustic response of hydrogen-air diffusion flames at various pressures are numerically studied by employing counterflow diffusion flame as a model flamelet in turbulent flames in combustion chambers. The numerical results show that extinction strain rate increases linearly with pressure and then decreases, and increases again at high pressures. Thus, flames are classified into three pressure regimes. Such nonmonotonic behavior is caused by the change in chemical kinetic behavior as pressure rises. The investigation of acoustic-pressure response in each regime, for better understanding of combustion instability, shows different characteristics depending on pressure. At low pressures, pressure-rise causes the increase in flame temperature and chain branching/recombination reaction rates, resulting in increased heat release. Therefore, amplification in pressure oscillation is predicted. Similar phenomena are predicted at high pressures. At moderate pressures, weak amplification is predicted since flame temperature and chain branching reaction rate decreases as pressure rises. This acoustic response can be predicted properly only with detailed chemistry or proper reduced chemistry.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.11-18
• /
• 2011

The geometrically similar swiss roll reactors of different physical sizes were tested with the aim of independently determining the effects of Re and Da. It is found that the difference between catalytic and non-catalytic combustions extinction limits are narrowed as scale decreases. In addition to assess the importance of fuel chemistry, different families of fuels including alkanes and ethers were tested. From these results the effect of scale and fuel type on microscale reactor performance and implications for practical micro combustion devices are discussed.

• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.149-152
• /
• 1986

The effects of polyphosphates (STP, TSPP, SAPP and SHMP) and heart on phyrsicochemical properties of a restructured pork product were studied. Among phosphates studied, no significant differences were found in TBA value and WHC while STP and TSPP showed a significantly better effect on the reduction of cooking loss than SAPP and SHMP. When the products with beef heart (5%, 10%, and 15%) were compared with beef organoleptically, texture and color of the products showed no difference from those of beef regardless of levels of heart. Juiciness was better and cooking loss was lower in the products with heart than in beef. When pork heart was added, cooking loss and TBA value were not significantly different among products with different levels of heart (5%,7.5% and 10%). Color and juiciness were improved significantly with 7.5%, and 10% levels compared to 5% level. The measurements by a color difference meter showed that the improvement of color was mainly due to the increase in redness of tilt product.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.585-592
• /
• 2016

Visualization was done by using $CH^*$ chemiluminescence images and PMT measurements in order to understand the origin of fluctuating pressure and chemical luminosity at about 500 Hz frequency even in stable combustion, which was observed in recent experimental tests, and to find the physical correlation leading to Low Frequency Instability(LFI) in terms of phase angle. In stable combustion, chemical reactions are distributed along the shear layer flow showing a negative coupling(about 180 degree in phase angle) with combustion pressure. However, phase difference is shifted to a positive coupling showing less than 90 degree in unstable case. Also a periodic change in the distribution of chemical reactions is observed along with local flame extinction and the appearance of big scale vortex flow. In the transition to LFI, local flame extinction and small vortex flow start to appear in a row. As seen in the bluff body wake in reactive flow, the periodic appearance of vortex flow seems to share the same physical process of BVK(Bernard Von Karman) instability generation. Thus, the appearance of local extinction in 500 Hz fluctuations is gradually amplified to complete extinctions of about 20 Hz, and it leads into LFI.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.47-52
• /
• 2005

The wide use of metal dusts have been found in industrial field and many dust explosion accidents occur by fire spread of dust layer. In this study, we developed a new experimental device to examine fire and explosion characteristics of the dust layer. Aspects of the burning zone over metals(Mg, Zr, Ta, Ti, etc) and PMMA(Polymethyl methacrylate) dust layers have been investigated experimentally to clarify behaviors (Spread rate and quenching distance) and effects of $N_2$ surrounding gas on the fire spread over metal dust layers. From the experimental result, it was found that the spread rate of metal dusts is larger than PMMA, the dependability of spread rate over the thickness of dust layer is small, and the minimum oxygen concentration of spread flame over Mg dust layer is 3.6-3.7 vol%. Since high correlation between the spread rate and the reciprocal of quenching distance was seen, relative risk prediction in those inflammable parameters can be predicted.