• Journal of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.166-171
• /
• 1981

The reactions of trimethylbenzenes were investigated over dealuminated, cation-exchanged mordenite catalysts. Higher reaction temperature favored the formation of disproportionation products. In the reaction of 1,2,4-trimethylbenzene, the formation of 1,3,5-trimethylbenzene and the disproportionation products decreased sharply with reaction time. The product distribution, especially the distribution of trimethylbenzenes, suggests that the effective pore diameter of Ba-exchanged dealuminated mordenite catalysts lies somewhere between 8.1 and 8.6${\AA}$.

• Journal of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.265-268
• /
• 1984

Rates of reactions of nine m-or p-substituted phenacyl bromides with quinoline in methanol were measured by an electric conductivity method. These reactions were found to proceed through an $S_N2$ path and were accelerated by both electron-donating and electron-withdrawing substituents. A plausible reaction mechanism for this observation was proposed. Some activation parameters for these reactions were also calculated.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.158-164
• /
• 1991

The reduction mechanism at a mercury electrode of o-cresolphthalexon(OCP) in strongly alkaline supporting electrolytes has been investigated by several electrochemical techniques. The radical formed after first one electron reduction uptake, dimerizes. The result of cyclic voltammetric investigation demonstrated the reversible nature of the electron transfer and standard rate constant was $3.27{\times}10^{-2}$ cm/sec. The apparent irreversible behavior of the second wave is a result of the existence of a fast protonation following the second electron transfer. At low concentration of OCP(< $1{\times}10^{-4}$M), cathodic current were remarkably adsorptive properties. Prolonged electrolysis was carried out at controlled potential of -1.85V, original violet color of the solution becames progressively weaker, and then colorless solution. The final product of an exhaustive electrolysis is electro-inactive. The appearence of four steps may be explained by the fact that the reduction of OCP elucidated ECEC mechanism.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.885-888
• /
• 1999

This study was carried out to determine the reaction kinetic constant of the dehydration - thermal decomposition of $Na_2B_4O_7{\cdot}10H_2O/Na_2B_4O_7{\cdot}5H_2O$ and to investigate the durability during the repeated use of a chemical heat-storage material and the reproducibility of reaction system. The order of the dehydration reaction was 1st-order. The reaction rate was directly proportional to a partial pressure difference of water steam. The kinetic constant was 0.27 and the reproducibility of dehydration reaction for a kinetic constant and a reaction order was excellent. The activity variation in the durability test of a chemical heat-storage material was within range of ${\pm}5%$ during the repeatedly use in several times.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.2
• /
• pp.135-141
• /
• 2005

배경 및 목적 : Multidrug Resistance-1 (MDR1) 유전자는 다약제내성에 관여하는 P-glycoprotein을 암호화한다. MDR1 유전자의 다형성은 P-glycoprotein의 발현과 기능의 차이를 일으켜 항암화학요법 반응에 영향을 미칠 수 있을 것이다. 저자들은 소세포폐암 환자에서 MDR1 유전자의 다형성과 일배체형에 따른 항암화학요법에 대한 반응을 조사하였다. 대상 및 방법 : 경북대학병원에서 병리적으로 소세포폐암으로 진단받고 etoposide-cisplatin 항암화학요법을 받은 54명을 대상으로 하였다. 전혈 5cc에서 DNA를 추출하고 PCR-RFLP법을 통해 MDR1 유전자 엑손 21의 2677G>T 다형성과, 엑손 26의 3435C>T 다형성을 조사하고 다형성과 일배체형에 따른 항암화학요법의 반응을 조사하였다. 결 과 : 2677G>T 유전자형에 따른 항암화학요법의 반응은 유의한 차이가 없었다. 3435 CC 유전자형은 3435 CT+TT 형에 비해 치료 반응율이 유의하게 높았다 (P = 0.025). 유전자형 분석 결과와 일치되게 2677G/3435C 일배체형은 다른 일배체형에 비해 치료반응을 보이는 경우가 유의하게 많았다 (P = 0.015). 결 론 : 소세포폐암에서 MDR1 유전자의 2677G>T와 3435C>T 다형성 및 이들 다형성의 일배체형은 etoposide-cisplatin 항암화학요법의 반응을 예측할 수 있는 지표로 사용될 수 있을 것으로 생각된다.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.768-773
• /
• 2019

The Fenton reaction, which evaluates the electrochemical durability of polymer membranes of polymer electrolyte fuel cells (PEMFC), and the degradation of polymer membranes by OCV holding method are compared. The Fenton reaction is a method that can evaluate the chemical durability of the polymer membrane at outside the cell in a shorter time than the OCV Holding method. The Fenton reaction was carried out at 30% hydrogen peroxide, 10 ppm iron, and $80^{\circ}C$ for 24 hours. OCV Holding was driven at $90^{\circ}C$, 30% relative humidity and OCV for 168 hours. The Fenton reaction caused a lot of degradation inside the polymer membrane. On the other hand, in OCV Holding, the membrane thickness was thinned by the entire surface and internal degradation. The fluorine emission rate was more than 10 times higher than that of OCV Holding due to the Fenton reaction. The hydrogen permeation rate increased about 30% at 24 hours of Fenton reaction. At OCV Holding, hydrogen permeability decreased after 24 hours and then increased. As a whole, there was a difference in a membranes deteriorated by Fenton reaction and OCV Holding.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.1
• /
• pp.46-54
• /
• 2017

Marcel Pourbaix에 의해 만들어진 Eh-pH 도표는 화학적으로 안정한 상을 pH와 전위 (Potential or Eh)의 관점으로 도시한 것으로서 수용액 내에서 일어나는 화학반응을 부식-방식의 관점에서 이해하데 유용하게 사용되어 왔다. pH (potential of hydrogen)는 수소이온의 농도의 함수이며, Eh는 표준수소전극 (SHE, standard hydrogen electrode) 에 대한 전위를 나타낸다. 수용액에서의 도금 반응은 부식반응의 역반응이라 할 수 있으므로 도금반응도 이 도표를 이용하면 반응에 대한 열역학적 예측이 가능하다. 국내외 전기화학 및 표면공학 관련 교재들을 보면 Eh-pH 도표로 대표되는 열역학이나 분극곡선으로 대표되는 속도론에 대한 설명은 주로 부식의 관점에서 설명이 되어있어 도금을 공부하는 학생들에게는 직접적인 이해가 쉽지 않은 것이 사실이다. 저자는 출연연구소에 근무하면서 새로 들어오는 학연생(대학원생)들의 Eh-pH 도표에 대한 이해도를 알아보면 이 도표를 이해하고 이용할 줄 아는 학생이 거의 없다는 점을 안타깝게 여겨왔다. 최근에는 단순한 금속 도금이 아니라 나노 분말 합성, 반도체 물질 합성 등 여러 가지 공정기술과 응용기술이 수용액에서의 산화-환원 반응을 이용하고 있기 때문에 Eh-pH 도표의 중요성은 더해가고 있음을 느끼고 있었다. 그러던 중, 일본의 표면 처리 학술지인 표면기술(表面技術) (2013년, 64권 2호)에 'Eh-pH 도표의 표면기술에의 응용'이라는 제하의 소특집이 발간되었다. 이 소특집은 6편의 논문으로 되어 있었다. 저자는 이 소특집을 읽는 순간 이 논문들을 번역하여 표면공학회지에 소개를 하면 도금이나 전기화학을 공부하는 학생들에게 큰 도움이 될 것이라는 생각을 하였다. 본 기술해설 논문은 저자가 이 소특집에 게재된 논문을 번역하고 일부 내용은 저자의 의견으로 가감하여 표면공학회 학생 회원 및 기업의 연구원들에게 소개하기 위하여 저역을 한 것이다. 이 논문은 매 호 한편씩 소개할 예정이며, 원문을 읽고 싶다면 표면기술(表面技術)을 참조하길 바란다.

• The Korean Journal of Quaternary Research
• /
• v.23 no.1
• /
• pp.42-53
• /
• 2009

In response to the abrupt climate change in recent years, atmosphere, ocean and cryosphere are reported to be altered. In addition to these changes, the land surface is also gradually changing and its impact on the global climate may not be negligible. The land surface change impacts the global climate via two ways, the biogeochemical and biophysical feedbacks. The biogeochemcial change in the land surface modifies the atmospheric trace-gas concentrations through a change in photo synthesis, while biophycal changes of the land surface alters the surface albedo, which influences the amount of the short wave radiative heat fluxes. There are many examples in the past that the change in land surface greatly influences the global climate change. The recent IPCC report has suggested that the climate change will occur rather abrubtly in the near future. In order to predict the future climate accurately, the impact of the land surface change is fully considered.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2019

The reduction of nitrogen to produce ammonia has been attracting much attention as a renewable energy technology. Ammonia is the basis for many fertilizers and is also considered an energy carrier that can power internal combustion engines, diesel engines, gas turbines, and fuel cells. Traditionally, ammonia has been produced through the Haber-Bosch process, in which atmospheric nitrogen combines with hydrogen at high temperature ($350-550^{\circ}C$) and high pressure (150-300 bar). This process consumes 1-2% of current global energy production and relies on fossil fuels as an energy source. Reducing the energy input required for this process will reduce $CO_2$ emissions and the corresponding environmental impact. For this reason, developing electrochemical ammonia-production methods under ambient temperature and pressure conditions should significantly reduce the energy input required to produce ammonia. In this review, we introduce the electrochemical nitrogen reduction reaction at ambient condition. Numerical studies on the electrochemical nitrogen reduction mechanism have been carried out through the computation of density function theory. Electrodes such as nanowires and porous electrodes have been also actively studied for further participation in electrochemical reactions.

• 월간산업보건
• /
• s.344
• /
• pp.29-34
• /
• 2016