• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.198-199
• /
• 2009

산업이 발달함에 따라 전기는 우리 일상 생활에 있어 없어서는 안 될 중요한 요소이나 그 사용에 따른 화재 위험성 또한 날로 증가하는 추세이다. 특히 전기 화재의 경우 전기용품 사용에 있어 그 사고를 미리 감지하기 어려워 사고 위험성에 대하여 무방비 상태가 된다. 특히 우리나라의 경우 전체 화재 건수 중 전기 화재가 차지하는 비율은 30%이상으로 일본, 미국 등 선진국에 비해 높아 화재 원으로서 전기 화재 예방에 대한 그 중요성 대두된다 본 논문에서는 전기화재 발화 원인 중 단자대 접촉부 접촉 불량으로 야기된 과열에 의한 화재를 예방하기 위하여 접촉부 접촉 저항을 검출 하는 시스템에 대하여 알고리즘 개발 및 설계 하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2086-2087
• /
• 2007

산업이 발달함에 따라 전기는 우리 일상 생활에 있어 없어서는 않 될 중요한 요소이나 그 사용에 따른 화재 위험성 또한 날로 증가하는 추세이다. 특히 전기 화재의 경우 전기는 시각적인 흐름을 볼 수가 없어 전기용품 사용에 있어 그 사고를 미리 감지하기 어려워 사고 위험성에 대하여 무방비 상태가 된다. 특히 우리나라의 경우 전체 화재 건수 중 전기 화재가 차지하는 비율은 30%이상으로 일본, 미국등 선진국에 비해 높아 화재원으로서 전기 화재예방에 대한 그 중요성 대두된다. 본 논문에서는 전기화재 발화 원인 중 단자대 접촉부 접촉 불량으로 야기된 과열에 의한 화재를 예방하기 위하여 접촉부 접촉 저항을 검출 하는 시스템에 대하여 알고리즘 개발 및 설계 하였다.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.122-129
• /
• 2018

Purpose : This study aims to seek out the risk of low-temperature burns and fire. Method : Hot vests are connected by higher voltage than walking voltage. Results : Accordingly, the possibility of low-temperature burns and fire was proved high. It was also shown that hot vests with relatively lower resistance on heat rays reached a higher temperature as the same voltage was applied. Conclusion : There are some problems with hot vests because they do not have any safety devices like a thermostat or a timer to prevent temperature increasing rapidly. For the purpose of reducing the risk of low-temperature burns and fire, setting the standard of the minimum resistance temperature and regulating the use of heat rays with lower resistance are necessary.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.455-464
• /
• 2005

Today the application of antiwashout underwater concrete to the construction sites is increasing steadily, while its reliability is in issue. Particularly, antiwashout underwater concrete is known to have very weak durability on frost attack, and hence Japan society of civil engineers(JSCE) regulated that not to use of antiwashout underwater concrete where the freezing and thawing is suspected. This study aims the improvement of the freezing and thawing resistance for antiwashout underwater concrete. From the results of fundamental test, FA20 and SG50 showed good performance in fluidity and long term compressive strength than control concrete. Meanwhile, MK10 marked the highest compressive strength through the whole curing age but a defect on fluidity was discovered. The results from the repeated freezing and thawing test show that the large volumes of air entrapped by cellulose based antiwashout underwater admixture gave bad effects to frost durability and hence not much benefits were confirmed from the use of mineral admixtures. However there were some increasing effects on frost durability of MK10 and SG50 by securing $6{\pm}0.5\%$ of entraining air. In the meantime, there was a increasing tendency of frost durability by increasing blame's fineness of ground granulated blast furnace slag.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.5
• /
• pp.303-314
• /
• 2021

With the high quality/high stiffness/high strength of segment lining, segment lining is increasingly used as the final lining of the tunnel. Precast concrete lining has higher quality and strength than field concrete. Paradoxically, this contributes to greater damage to concrete in the event of a fire in a tunnel. In this study, tests were conducted to determine the fire resistance performance of segment linings according to fiber content in fire resistance methods using synthetic fibers such as PP fibers. As a result, it was confirmed that fire resistance performance required by the relevant project can be secured when using 1.5 kg/m³ of PP fiber. In addition, comparison of the results of PP fibers with PET, a similar synthetic fiber, showed better fire resistance performance than when PP fibers were used.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.615-620
• /
• 2017

In this study, we have developed the resistive leakage current detecting and tripping circuit breaker based on a 32bit ARM processor. The developed leakage circuit breaker can be operated in a desired trip threshold within 0.03 seconds as specified in KS C 4613. This resistive leakage current breaker is expected to be applicable as a circuit breake for prevention of electric fires and electric shock in smart distribution panel.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.160-164
• /
• 2011

국내 건축법에서는 화재의 확산을 방지하기 위해 방화구획을 설치하여 인명피해와 재산피해를 최소화 하고 있다. 따라서 방화구획 개구부의 방화문, 방화셔터 등 각종 배관 관통부 시스템의 화재저항 성능이 중요하다. 이에 본 연구에서는 방화구획 중 넓은 면적에 사용되는 방화셔터를 각 종류별 내화성능실험을 통하여 방화셔터의 방화성능 확인과 더불어 실험시 방화셔터에서 발생하는 복사열의 측정을 통하여 화재가 확대될 수 있는 위험성을 예측하였다.

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.86-95
• /
• 2016

Weight-bearing building materials are substantially weakened under high temperatures, and this is evident through the collapse of structures once engulfed by fire. Currently, there is no scientific or technological process of evaluating the real-time structural stability of a building whcih is engulfed by flame. There are many building design specifications which aim to reduce the risk of fire, but little consideration given to fire officer safety while operating in a dangerous building. This paper aims to provide direction within building policy in order to ensure the safe evacuation of fire-fighters in case of an impending building collapse. This paper suggests evaluation criteria for buildings which are damaged due to fire, autilizing current information on fire-resistant building design and a fire-resistant capacity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.417-418
• /
• 2010

The purpose of this study is to investigate the fire resistance of high strength concrete with fiber after 3 hours unstressed fire test. Two types of fiber, polypropylene(PP) and Nylon(NY), were selected, and three cover thickness were selected, which were 40mm, 50mm, 60mm. The results indicate that the fire resistance will be achieved in suitable amount of fiber.

• Fire Science and Engineering
• /
• v.21 no.4
• /
• pp.65-71
• /
• 2007

This paper is studied on a protective control system for electrical fire and electrical faults by using electrical and thermal characteristics of PTC thermistor. The PTC thermistor has characteristic or positive resistivity temperature coefficient according to the temperature variation, which is construction of a regular square and cube demarcation with $BaTiO_3$ Ceramics of positive temperature coefficient. Also PTC thermistor shows the phenomenon which is rapidly increased in the resistivity if the temperature is increased over Curie temperature point. This paper is proposed on a protective control system used PTC thermistor which is protected from electrical fire due to electric short circuit faults or overload faults. Some experimental results of the proposed electric safety control apparatus are confirmed to the validity of the analytical results.