• The Journal of the Korea Contents Association
• /
• v.17 no.5
• /
• pp.491-498
• /
• 2017

This study is to determine the significant effect of white and pink noise on brain. The brain synchronization has been analyzed under the condition of non-noise, white nose and pink noise(male 10, female 10, mean age $23.3{\pm}2.14$). As a result of analysis, pink noise stimulus, alpha, low beta band, and high beta band were significantly decreased than non-noise and white noise. In addition, these brain response pattern significantly increased at frontal lobe and temporal lobe, and dominated on the right hemisphere. This result is considered to be useful of sound design in driving quality of human life on the basis of neuroscience.

• The Journal of the Acoustical Society of Korea
• /
• v.4 no.2
• /
• pp.26-35
• /
• 1985

본 논문에서는 시스템의 전달계에 있어서 추정임펄스응답신호의 정도평가법으로서 새로운 방법 을 제안한다. 이 방법의 효과에 대해서는 종래부터 이용되어온 방법들과의 논의와 컴퓨터 시뮬레이션실 험 결과를 비교하여 기술하고 있다. 추정임펄스응답의 정도는 다음의 절차에 의해 평가하고 있다. 전달 계의 입력신호는 컴퓨터가 발생하는 화이트노이즈로서 구동시키고, 그 전달계의 응답신호는 전달계를 통한 입력신호를 측정한다. 이 때 전달계에서 추정응답신호를 얻기 위하여 추정임펄스응답신호와 구동 입력신호인 화이트노이즈를 콘볼루션 계산을 행한다. 추정응답신호인 계산한 응답신호와 측정한 응답신 호는 각 샘플링 시간에 있어서 차의 신호의 파워의 합을 측정한 응답신호의 샘플값을 제곱한 신호의 합 에 대해 비를 계산한다. 이 비율이 음향전달계의 추정임펄스응답신호의 정도평가법에 사용된다.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.2
• /
• pp.63-72
• /
• 2008

One of the most important matters in keeping membrane structures in healthy condition is to maintain the proper tension distribution over the membrane. However, it is not easy to know the real stress level in the membrane quantitatively after completion of the structures. Authors suggested measurement method that can measure membrane stress using sound wave, and have been holding experimental tests of membrane stress measurement that used the sound external excitation with sine wave and white noise. The concept of the method is the fact that measurement of resonance frequency by vibrating membrane having rectangular boundary by audible frequency can measure membrane stress indirectly. In this paper, through the experimental tests it is proved that the equipment can be used for not only the membrane material of type A but also for types B and C. In addition, it is proved that the developed measurement equipment is available to stably measure the membrane stress which exists in the membrane material of the actual membrane structures.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.321-324
• /
• 2008

Type-2 퍼지 집합은 Type-1 퍼지 집합에서는 다루기 어려운 언어적인 불확실성을 더욱 효과적으로 다룰 수 있다. TSK 퍼지 로직 시스템(TSK Fuzzy Logic Systems; TSK FLS)은 Mamdani 모델과 함께 가장 널리 사용되는 FLS이다. 본 연구의 Interval Type-2 TSK FLS 모델은 전반부에서 Type-2 퍼지 집합을 이용하고 후반부는 계수가 상수인 1차식을 사용한다. 전반부의 파라미터는 오류역전파 방법(Back-propagation)을 통한 학습으로 결정되고, 후반부 파라미터(계수)들은 Least squre method(LSM)를 사용하여 결정된 값을 사용하여 모델을 구축한다. 본 논문에서는 Type-1 TSK FLS과 Type-2 TSK FLS의 성능을 가스로 공정 데이터를 적용하여 비교 분석한다. 또한 랜덤 화이트 가우시안 노이즈를 추가한 테스트 데이터를 사용하여 노이즈에 대한 성능을 분석한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.07a
• /
• pp.272-274
• /
• 2015

본 논문에서는 하천 인근의 재난 방지를 위한 효율적인 재난감지 알고리즘을 제안한다. 제안하는 알고리즘은 영상처리를 기반으로 임계값을 자동으로 변경시켜 물과 물이 아닌 영역을 분리한다. 수위감지 알고리즘을 단순 물의 색상 정보만을 이용해 분석한다면, 야간 저조도, 폭우와 같은 상황 등에서 알고리즘 성능이 저하될 우려가 있다, 이를 해결하기 위해서 물의 색상 정보뿐 아니라 물의 흔들림 정도도 함께 고려하여 물의 영역을 찾아낸다. 또한 보다 안정적인 수위 분포를 분석하기 위해서 시간과 공간에 대한 필터링을 추가하여 빗물, 물결, 카메라의 화이트 노이즈 등 다양한 노이즈에 보다 안정적으로 수위 분포를 분석한다. 본 논문에서 제안하는 수위감지 알고리즘을 적용한다면, 센서, 목자판 인식 등 이전의 수위계측 방식보다 성능, 비용 면에서 모두 우수할 것으로 예측된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.740-746
• /
• 2018

Up until now, attempts to produce computer instruments have been largely focused on two types of sampling methods and physical modeling. Since the sampling method removes much of the harmonics in the sampling process, the effect of exciter that emphasizing the harmonic of the strings are mini. However, the physical modeling method can produce a lot of harmonics, and by emphasizing the harmonics of a particular frequency band among these harmonics, it is possible to produce a sound more like a lively sound. In this paper, we propose a method of using white noise in realizing exciter emphasizing harmonics of pre - specified frequency band in prefectural physical modeling. And comparing the envelope and spectrum of the Gayageum sound, we confirmed that the physical modeling method with the exciter is more suitable for the actual Gayageum sound than the sampling method and the conventional physical modeling method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.969-979
• /
• 2002

This paper proposes an novel method of minimizing Interference which causes data decision error in digital wireless communications. In this method, in order to suppress ISI which is caused by the phase difference between the transmitted and received signal phases, the transmitted and received signals are always kept orthogonal by compensating the transmitted signal for detecting the phase noise and the delay of the received signal was implemented by MOS circuits. To delay the phase of the signal, additive white Gaussian noise (AWGN) environment was used. The phase and delay of the signal transmitted through AWGN channel were compensated in the modulator of the transmitter and the compensated signal was demodulated using quasi-direct conversion receiver and QPSK demodulator. ISI suppression was achieved by keeping the orthogonality between the compensated transmitted signal and the receive signal. The error probability of data decision was compared. By simulation the proposed system was proved to be effective in minimizing the ISI.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.384-387
• /
• 2016

본 논문에서는 4K UHD 방송장비 중 디스플레이기기와 인코더의 성능 시험을 위해 개발된 패턴 발생장비를 소개하고 있다. 패턴의 제작 및 재생 방법에 따라 표출되는 패턴의 종류를 그래픽/실사, 정지/동영상으로 구분할 수 있는데 본 논문에서는 모션블러, 모션져더, AV lip sync, 텍스트 주변 인코딩 화질 열화 확인, 화이트 노이즈, 프레임 누락, HDR 확인, 지연시간 측정, 계단현상 확인, 이미지 스티킹 등 그래픽 동영상 패턴에 대해 각각의 제작 의도를 설명하고 이를 통해 디스플레이기기와 인코더의 성능을 평가하는 방법에 대한 간략한 소개와 개발된 패턴발생장비의 입출력 사양을 제시하고 있다.

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.3
• /
• pp.67-74
• /
• 2014

The author has proposed and verified the accuracy through experiments on a method of measurement through the use of sound waves that not only can quantitatively measure each of the dual directions of the fiber axis with high accuracy of membrane tension created on the surface of the membrane structure, but also can be easily operated in the field of construction. This paper reports the solution for problems of variables caused in the process of downsizing of the measurement equipment in order for practical use, and verifies the correspondence possibility of various stress ratios.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.962-965
• /
• 2002

Full scale durability test in the laboratory is an essential of any fatigue life evaluation of components or structures of the automotive vehicle. Component testing is particularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, Hydraulic road simulator is used to carry out the fatigue test and the vibration test. In this paper, the algorithm and software to realize the real road profile are developed. The operation software for simultaneously controlled multi-axial simulator is developed and the input and output data are displayed window based PC controller in real time. The software to generate the real road profile are developed. This paper developed a road profile reappearance software and simultaneously apply 3-axial actuator to white noise, so we verified the propriety of reappearance software through accomplishes an real test.