• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1036-1042
• /
• 2005

The crosstalk between bent transmission lines and the effects of additional trace with the metal filled via holes on alleviating the crosstalk are investigated using the circuit concept approach for transmission line sections and impedance modeling for via hole sections. All sections are represented by ABCD matrices and then cascaded. Finally the calculated results by proposed method are confirmed that they agree with the measured results in less than 3 dB except a band of low frequency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1110-1115
• /
• 2006

Cold expansion of fastener holes has been successfully used for many years to impart beneficial compressive residual stresses. Beneficial compressive residual stress of fastener hole that has been cold expanded before is reduced by using of materials for a long time. As a result, fatigue life of material is reduced. So, compressive residual stresses of material have to regenerate by re-cold expansion method. In this paper, it was carried out a finite element analysis about variation of residual stress due to tensile stress and residual stress distribution that was regenerated by re-cold expansion method in the fastener hole. Here, a diversity tensile stress was used. Also, it was performed a finite element analysis according to cold expansion rate of re cold expansion in order to obtain a beneficial compressive residual stress.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2002

Black hole binary candidates are known to be composed of a black hole with 10 $M_{\odot}$ and a K or M type companion. Because the companion is believed to fill the Roche lobe that is very aspherical, the light curves of black hole binaries are characterized by an ellipsoidal variation. It has been known that the ellipsoidal light curves exhibit asymmetric maximum brightness at the orbital phases 0.25 and 0.75, which has been attributed to star spots or the hot impact points of the accretion flow on to the accretion disk around the black hole. In this paper, it is pointed out that the special relativistic beaming effect contributes to the asymmetry of several percent often observed in the light curves. The typical orbital velocity 400 km $s^{-1}$ observed in black hole binaries may induce the temperature difference $\DeltaT/T$ ~ 1/400 of the late type companion star in the observer`s rest frame, because of the special relativistic Doppler beaming effect. This difference in temperature can result in several per cent of brightness sensitively dependent on the wavelength band, which is comparable to what has been observed in most black hole binary candidates. Considering the significant contribution of the special relativistic Doppler beaming effect, we conclude that the estimation of the sizes and temperatures of the star spots or the hot impact point needs serious revision.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.1
• /
• pp.47-55
• /
• 2009

Bot is a kind of worm/virus that is remotely controlled by a herder. Bot can be used to launch distributed denial-of-service(DDoS) attacks or send spam e-mails etc. Launching cyber attacks using malicious Bots is motivated by increased monetary gain which is not the objective of worm/virus. However, it is very difficult for infected user to detect this infection of Botnet which becomes more serious problems. This is why botnet is a dangerous, malicious program. The Bot DNS Sinkhole is a domestic bot mitigation scheme which will be proved in this paper as one of an efficient ways to prevent malicious activities caused by bots and command/control servers. In this paper, we analysis botnet activities over more than one-year period, including Bot's lifetime, Bot command/control server's characterizing. And we analysis more efficient ways to prevent botnet activities. We have showed that DNS sinkhole scheme is one of the most effective Bot mitigation schemes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.857-864
• /
• 2013

A laser machining process has been applied in many manufacturing fields and it provides an excellent energy control for treating materials. However, a heat effect during laser machining can deteriorate material properties. Specifically, a thermally induced stress can be a problem in laser-machined structures on a metal surface. In this study, temperature and stress on cold-rolled carbon steel sheet machined with laser hole drilling were explored in an experimental approach and a numerical method. Stresses by temperature gradients inside the materials were generated in fast cooling. The stresses were measured by using a hole-drilling method and the material properties of carbon steel (SCP1-S) were obtained in the experiment. It was found that the stress predicted from the numerical analysis was in agreement with the stresses measured by using the hole-drilling method. The analysis can be applied for evaluating structure characteristics machined with a laser.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.29-36
• /
• 2007

Despite the role of tunnels in today's roadway environment, the study on tunnel lighting is still scant. Drivers passing through a tunnel face some difficulties caused by the visual differences between outside and inside of the tunnel. The whitehole phenomenon at a tunnel exit-zone severely decreases the driver's visibility in the daytime. A probeam lighting is generally recommended for the prevention of it. This paper simulates an exit-zone with a whitehole phenomenon to verify the effect of probeam lighting. Even though the tunnel lighting is important, it is not easy to consider enough number of lighting alternatives at the stage of tunnel design due to the complexity of tunnel conditions. This paper is expected to contribute improving the visibility in tunnels, especially at the exit-zone.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.11
• /
• pp.779-786
• /
• 2019

Effects of chamfered perforated plate on pressure loss characteristics were studied with CFD analysis. Both inlet chamfer angle and outlet chamfer angle were considered. Perforated patterns were compared by pressure loss coefficient in certain porosity and Reynolds number. Reynolds number effects were studied for several chamfer angles and plate thickness. As the inlet chamfer angle was increased, the pressure loss coefficient was decreased until the certain angle and reversed to increase. In the outlet chamfered shape cases, the pressure loss coefficient was increased with chamfer angle. Effects of pattern shapes and Reynolds number on pressure loss characteristics were negligible with different chamfer angles and thickness studied in this paper.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.165-174
• /
• 2010

This study was conducted to evaluate the feasibility of expedite repairing of concrete pavements using precast concrete pavement method and to investigate the effectiveness of slab connection methods. In the demonstration construction, four slabs of jointed concrete pavements were replaced with the precast slabs. First, precast concrete slabs were designed and fabricated, then existing slabs were cut and removed, and finally precast slabs were installed. The slabs were leveled and pockets, holes, and space between the slab bottom and the underlying layer were grouted. From the demonstration construction, details about the design and construction of the precast pavements for repairing of pavements were evaluated. In addition, the slab connection methods such as pocket and hole connection methods were applied in the construction and the slab curling behaviors at the joints that include those connection methods were compared. The results showed that both slab connection methods were applicable, and the hole connection method was superior.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.158-159
• /
• 2004

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.60-60
• /
• 1994