• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.74-79
• /
• 2010

We have designed a millimeter-wave passive imaging sensor with multi-horn antenna array. Six horn array antenna is suggested that it is integrated into one housing, and this antenna is effectively configurated m space to assemble with LNA of WR-10 structure. Antenna is designed to have the peak gain of 17.5dBi at the center frequency of 94GHz, and the return loss of less than -25dB in W-band, and the small aperture size of $6mm{\times}9mm$ for antenna configuration with high resolution. LNA is designed to have total gain of more than 55dB and noise figure of less than 5dB for good sensitivity. We made a detector for DC output translation of millimeter-wave signal with zero bias Schottky diode. It is shown that good sensitivity of more than 500mV/mW.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.515-521
• /
• 2014

In this paper, we designed axis-displaced Gregorian antenna by using Ray-tracing method. This antenna improves gain, VSWR by rotating the axis of the sub-reflector to get rid of E-field wave returned from sub-reflector to feed horn. Therefore it reduce the sub-reflector size and the volume of antenna. This method is used to track the propagation path for radiation pattern of feed horn from feed horn to sub-reflector, main-reflector and air. We get E-field distribution of this antenna aperture and calculate antenna radiation pattern and optimize the antenna performance. The Ray-tracing Method was verified because the gain, radiation patterns, side lobe level, beam width and return loss of the designed antenna are very similar to CST simulation result and a measured result of the fabricated antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.430-439
• /
• 2007

In this paper, we propose a broadband TEM horn antenna optimized using a genetic algorithm. The characteristics required for the TEM horn are the broad matching bandwidth from 2 GHz to 10 GHz and high gain in broadside with a small gain deviation within that bandwidth. In addition, a broadband balun is designed to improve the portability and to reduce the total size of the antenna. The measured return loss of the proposed TEM horn with the broadband balun is less than -10 dB(VSWR<2) from 2 GHz to 10 GHz. Compared to a conventional triangular type TEM horn, the proposed antenna shows about 80 % reduced volume and gives the broadside gain about 12 dBi with a gain deviation less than 6 dB from 2 GHz to 10 GHz. The time domain measurement shows less than 0.4 ns group delay and the pulse measurement using the transmitting signal with the rising time of 58.5 ps shows the received pulse with the rising time of 66.5 ps, which is less than 10 % rising time variation.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.79-79
• /
• 2009

Ultrasonic fine welding, cutting, cleaning, inspection and measurement is widely used in various fields over 20kHz. However, for High Frequency of 60kHz or more study areas is still insufficient, and the result is lacking. Therefore, this study used ultrasonic horn to the Bonding of Dissimilar Materials for effective design. Finite element analysis (FEA) is using the equations of motion to establish the model. The optimal design for the basic interpretation of vibration characteristics of the ultrasonic measures horn will examine the design.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.81-84
• /
• 2000

본 연구에서는 1000Hz 미만의 저주파 대역에서 음향방사 특성을 향상시키기 위한 새로운 형태의 음향 변환기를 연구하였다. 이 음향 변환기는 세 개의 혼을 직렬의 조합으로 연결한 형태를 띄고 있고 설계상에 필요한 계산을 위해 혼 방정식에 근거해 간단한 모델을 개발했다. 음향 발생을 위한 변환기로써 원형판에 얇은 압전체를 붙인 작동기를 사용하였다. 제안된 음향 변환기는 개발된 모델을 통해 설계되었고 실험을 위해 제작되었다. 제안된 음향 변환기의 성능은 실험과 수치해석을 통해 검증하였다 음향 해석 프로그램인 SYSNOISE를 이용한 수치해석과 실험에 근거한 결과는 제안된 음향변환기가 600Hz 미만의 주파수 대역에서 5-30dB의 음압을 발생시키는 것을 보여준다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.308-315
• /
• 2001

In this paper, a new power amplifier is proposed for reduction of amplified RX band noise signals as well as intermodulation distortion signals using feedforward technique. This power amplifier is implemented for IMT-2000 basestation TX frequency band. Both TX band intermodulation distortion signals and RX band noise signals are reduced by controlling variable attenuator, phase shifter and error amplifier. The proposed power amplifier, which contains two loops-intermodulation distortion signals cancellation loop and RX band noise signals cancellation loop, can provide duplexer with low TX path insertion loss for various wireless communication systems due to choice of loose RX attenuation characteristic. The principle of the proposed amplifier is described graphically based on the conceptual schematic diagram. A two-tone test for power amplifier is done at 2.14GHz with frequency spacing of 5MHz, and RX band rejection test is done over RX full band of 60MHz with 1.95GHz center frequency. Experimental results represent that the cancellation performance of intermodulation distortion signals and RX band noise signals are more than 3 1dB and 21dB, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.665-667
• /
• 2010

In this paper, the method to detect the IM(Inter Modulation) components of power amplifier is proposed by using frequency down-convertor. Output signals of power amplifier which is coupled by 20dB coupler and divided by power divider are applied to RF and LO of the frequency converter. It could be found the magnitude of IM components of power amplifier as a converted DC voltage which is come from the difference between 3th and 5th IM component. The detected DC voltage values are changed from 0.72V to 0.9V when 3rd IM component level changed from -26.4dBm to +2.15dBm and 5th IM component level changed from -34.2dBm to -12.89dBm as the Vgs of 3W power amplifier is changed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.279-280
• /
• 2010

• Journal of the KSME
• /
• v.53 no.5
• /
• pp.35-40
• /
• 2013

이 글에서는 최근 많은 연구가 수행되는 자연모사 기법 중 식물모사 기법을 소개하고자 한다. 식물의 유동 원리 및 중요성, 식물 유동원리를 이용한 식물모사 마이크로 디바이스의 설계, 식물의 진화혼적 최적화의 공학적 접근에 대해 논한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.592-593
• /
• 2010