• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.147-154
• /
• 2018

This study was aimed to improve the productivity and income of mushroom farming by developing a new casing material as a substitute for clay loam casing soil, which is becoming more difficult to acquire. When the new casing materials were used for the stable production of button mushroom (Agaricus bisporus), a 1:1 mixture of clay loam and button mushroom media obtained after harvest supported 13% greater mycelial growth ($32.0kg/3.3m^2$). This material was better than clay loam soil in preventing contamination with environmental compounds and pests. The use of an inexpensive 1:1 mixture of peat moss and coco peat resulted superior mycelial growth with 4% better yield ($32.9kg/3.3m^2$) compared with conventional clay loam soil. Advantages of these casing materials included ready availability and improved productivity. Mixtures of peat moss + coco peat + zeolite (50%:30%:20%) and coco peat + coal ash (75%:25%) could substitute for conventional casing soil. Additionally, the novel mixtures containing material obtained after cultivation might be used to produce organic fertilizer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.2
• /
• pp.45-55
• /
• 1990

This study describes on the erosion control effects of the several grasses and its mixtures for the man-made slopes. The grasses used for this experiment include cool-season grasses such as Festuca rubra L. (Creeping redfescue), Poa pratensis L. (Kentucky bluegrass), Lolium perenne L. (Perenial ryegrass), Lolium multiflorum LAM. (Italian ryegrass), Festuca arundinacea Schrel. (Tall fescue), and warm-season grasses such as Eragrostis curvula Schrad. (Weeping lovegrass), Zoysia japonica Steud. (Zoysiass) and native plants (Artemisia princeps var. orientalis Hara, Lespedeza cuneata G. Don, Arundinella hirta var. ciliata K.) This study was conducted at Dan-kook University from April, 1988 to Octover, 1989. The results are summurized as follows; 1.Cool-season grasses covered the ground quickly in early stage, and weekened slowly during sumer season. Warm-season grasses and native-plants covered the ground slowly in early stage, but during summer season they grew vigorously, so outweighed cool season grasses. 2. The amount of aboveground growth of weeping locearass and underground growth of Artemisia prinoepts are quite differant from others. Since Arumdinella hirta has deep root system, it is thought to very useful protection of unstable for hrdro-seeding. Because cool-season grasses are useful for quick coverage, and native plants or warm-season grow well during summer season with the better compatability to weeds. 3.Mixture III(cool-season and warm-season grasses), mixtureIV(native spp. and Italian ruegrass), and mixtureV(native spp.) resulted in better control of erosion control on man-made slopes. Native spp. has equivallent capacity of erosion control compared to several foreign grasses.

• Economic and Environmental Geology
• /
• v.34 no.4
• /
• pp.329-343
• /
• 2001

The deep environment and geochemical evolution of the Bugok geothennal waters, located in the Kyeongnam Province, was re-interpreted based on the hydrochemical and isotopic data published by Yun et al. (1998). The geothermal waters of the Bugok area is geochemically divided into three groups; Geothennal water I, II and III groups. Groups I and II are geochemically similar; high temperature (55.2-77.2$^{\circ}$C) and chemically belonging to Na-S04 types. However, pH and Eh values are a little different each other and Group II water is highly enriched in S04 compared to Group I water. Group III water, occurring from peripheral sites of the central part of the geothennal waters, shows temperature range of 29.3 to 47.0$^{\circ}$C and belongs to $Na-HCO_3-S0_4$ types. The deep environment and geochemical evolution of the Bugok geothennal waters, showing the diversity of geochemistry, can be interpreted as follows; I) Descending to great depth of meteoric waters that originated at high elevation and reacting with sediments and/or granites in depth. The $S0_4$ concentration of the waters has been increased by the dissolution of sulfate minerals in sediments. 2) During the continuous descending, the waters has met with the reduction environment, producing the $H_2S$ gas due to sulfate reduction. The waters has been heated up to 130$^{\circ}$C and the extent of water-rock reaction was increased. At this point, pH of waters are increased, S04 concentration decreased and calcite precipitated, therefore, the waters show the $Na-S0_4$ type. 3) Ascending of the geothennal waters along the flow path of fluids and mixing with less-deeply circulated waters. The $S0_4$ concentration is re-increased due to the oxidation of $H_2S$ gas and/or sulfide minerals in sediments. During continuous ascending, these geothennal waters are mixed with shallow groundwater.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.97-124
• /
• 1976

To find out the most effective method of treatments for the induction of sprouting of dormant seed potato pieces for the fall crop production of Irish cobbler, this experiment was carried out with sprout inducing bed and field performance trial. In GA treatments, about 10 days were required to sprout and resulted uniform and thin 3-4 sprouts per tuber piece, but sprouts were slender and rooting was not observed. In Ethrel treatments, 20-25 days were required, and sprouts were inferior than that of GA treatment in uniformity of sprouting, and percentage of rotten pieces and of healthy sprouted tuber pieces, but number of sprouts per tuber pieces was low, being 1-2, and sprouts were short, thick, and healthy, and showed good rooting. In GA and Ethrel mixture treatments, 1-2 more days were required to sprout than GA treatments, but sprouts were relatively healthy, and other sprouting pattern were like that of GA treatments. In Ethylene chlorohydrin and 6-Benzyl-adenine treatments, sprouting was like that of Ethrel treatments, but much more days were required than Ethrel treatments and tendency of severe rotting was observed. Optimum treating methods of promising chemicals found to be 1-2 and 2-5 ppm GA solution, 500 and 1000-2000 ppm Ethrel solution, and 1-2＋250-500 and 5＋250-500 ppm GA and Ethrel mixture solution for 60 min. treatment of tuber piece and whole-tuber, respectively. Induction of sprouting in dry and hot time resulted severer rotting of tuber pieces during the induction of sprouting and with the advancement of dormancy, being delayed in date of treatment, tendency of promotion of sprouting and rooting was observed. When sprouted tuber piece was transplanted at the same date, yields were in order of Ethrel, GA and Ethrel mixture, and GA treatment, indicating the correlation between yield and healthiness of sprout and rooting status of sprouted tuber piece. In all treatments, earlier transplanting resulted higher yields.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.557-575
• /
• 2020

Plasma blasting which is generated by high voltage arc discharge of electricity is applied to soil mass to improve permeability of soil and cleaning efficiency of oil contamination. A new high voltage generator was manufactured and three types of soil including silty sand, silty sand mixed with lime and silty sand mixed with cement were prepared. Small and large soil columns were produced using these types of soil and plasma blasting was performed within soil columns to investigate the variation of soil volume penetrated by fluid and permeability. Soil volume penetrated by fluid increased by 11~71% when plasma blasting was applied in soil. Although plasma blasting with low electricity voltage induced horizontal fracture and fluid penetrated along this weak plane, plasma blasting with high voltage induced spherical penetration of fluid. Plasma blasting increased the permeability of soil. Permeabilty of soils mixed with lime and cement increased by 450~1,052% with plasma blasting. Permeability of soil increased as discharge voltage increased when plasma blasing was applied once. However, several blastings with the same discharge voltage increase or decrease permeability of soil. Oil contaminated soil was prepared by adding diesel into soil artificially and plasma blasting was performed in these oil contaminated soil. Cleaning efficiency increased by average of 393% for soil located nearby the blasting and by average of 239% for soil located far from the blasting. Cleaning efficiency did not show any correlation with discharge voltage. All these results indicated that plasma blasting might be used for in-situ cleaning of oil contaminated soil because plasma blasting increased permeability of soil and cleaning efficiency.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.44-51
• /
• 2022

In the steelmaking process using an electric arc furnace (EAF), light-burnt dolomite, which is a flux containing MgO, is used to protect refractory materials and improve desulfurization ability. Furthermore, a recarburizing agent is added to reduce energy consumption via slag foaming and to induce the deoxidation effect. Herein, a waste MgO-C based refractory material was used to achieve the aforementioned effects economically. The waste MgO-C refractory materials contain a significant amount of MgO and graphite components; however, most of these materials are currently discarded instead of being recycled. The mass recycling of waste MgO-C refractory materials would be achievable if their applicability as a flux for steelmaking is proven. Therefore, experiments were performed using a target composition range similar to the commercial EAF slag composition. A pre-melted base slag was prepared by mixing SiO₂, Al₂O₃, and FeO in an alumina crucible and heating at 1450℃ for 1 h or more. Subsequently, a mixed flux #2 (a mixture of light-burnt dolomite, waste MgO-C based refractory material, and limestone) was added to the prepared pre-melted base slag and a melting reaction test was performed. Injecting the pre-melted base slag with the flux facilitates the formation of the target EAF slag. These results were compared with that of mixed flux #1 (a mixture of light-burnt dolomite and limestone), which is a conventional steelmaking flux, and the possibility of replacement was evaluated. To obtain a reliable evaluation, characterization techniques like X-ray diffraction (XRD) analysis and X-ray fluorescence (XRF) spectrometry were used, and slag foam height, slag basicity, and Fe recovery were calculated.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.11
• /
• pp.497-508
• /
• 2008

Mobile Multimedia File System, MNFS, is a file system which extensively exploits NAND FLASH Memory, Since general Flash file systems does not precisely meet the criteria of mobile devices such as MP3 Player, PMP, Digital Camcorder, MNFS is designed to guarantee the optimal performance of FLASH Memory file system. Among many features MNFS provides, there are three distinguishable characteristics. MNFS guarantees, first, constant response time in sequential write requests of the file system, second, fast file system mounting time, and lastly least memory footprint. MNFS implements four schemes to provide such features, Hybrid mapping scheme to map file system metadata and user data, manipulation of user data allocation to fit allocation unit of file data into allocation unit of NAND FLASH Memory, iBAT (in core only Block Allocation Table) to minimize the metadata, and bottom-up representation of directory. Prototype implementation of MNFS was tested and measured its performance on ARM9 processor and 1Gbit NAND FLASH Memory environment. Its performance was compared with YAFFS, NAND FLASH File system, and FAT file system which use FTL. This enables to observe constant request time for sequential write request. It shows 30 times faster mounting time to YAFFS, and reduces 95% of HEAP memory consumption compared to YAFFS.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.136-144
• /
• 2013

In this study, in order to establish a plan that will enable safe use of renewable resources such as diverse industrial by-products and urban recycled materials, we conducted experiments that focused on flow, bleeding, compressive strength and environmental pollution evaluation to evaluate the material properties of low strength concrete using BFS and SS. In the case of low strength concrete using BFS and SS, blending of at least BFS 6000 within a 30% range regardless of the type of sand used was found to be the most effective approach for improving the workability by securing the minimum unit quantity of water, restraining the bleeding ratio and establishing compressive strength by taking account of the applicability at the work site. In particular, in view of the efficient use of SS, the optimal mixing condition was found to be the mixing of BFS 8000 with in the 30% range, not only for improving the workability restraining the bleeding ratio and establishing the compressive strength but also for application to the work site. Further, the results of tests on hazardous substance content and those of elution tests conducted on soil cement using SS indicated that all values satisfied the environmental standards without any harmful effects on the surrounding environment.

• Land and Housing Review
• /
• v.7 no.1
• /
• pp.53-63
• /
• 2016

This paper contains structural analysis and design regarding how three types of green roof load affect roof slab design of LH housing and facilities. Based on the Structural analysis, an appropriate Roof slab rebar guideline and roof slab thickness have been set up for the green roof load which takes effect on structural design of roof slab. Result of structural analysis and design has been made as follows. Roof slabs can arrange the slab rebar(D10) within the 200~250mm disregarding the types of the green roof load and the pattern of green roof load; also, slab thickness can be designed within 150mm. Moreover, even if the concrete design strength of roof slab changes to 24, 27, and 30MPa, D10 rebar can still be arranged within 200~250mm, and 150mm for slab thickness. Two-way slab of commercial building was appeared to be arranged by slab rebar(D10) within 200mm and 150mm for slab thickness disregarding the soil type or the soil thickness of green roof.

• Journal of Plant Biotechnology
• /
• v.39 no.2
• /
• pp.114-120
• /
• 2012

An efficient in vitro propagation was established by using axillary bud explants of roseroot (Rhodiola rosea L.), which has been known as a medicinal plant in East Asia. Among various media tested, MS medium supplemented with 1.0 mg/L BA and 1.0 mg/L $GA_3$ was found to be the best for multiple shoot formation (15 axillary shoots per axillary bud). In addition 1/2MS medium containing 50 g/L sucrose was best for shoot elongation (7.8 cm) and increasing total chlorophyll contents (8.64 mg/g) best. Maximum number of roots (17.7 roots per explant) was observed on the medium without plant growth regulators. Propagated plants were successfully acclimatized to ex vitro conditions, with a survival frequency of 97% after 12 weeks. Most rooted shoots grew well and produced viable seeds when grown in vitro culture conditions. Therefore, R. rosea can be effectively propagated in vitro by the system we developed in this study.