• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.250.2-250.2
• /
• 2010

빛과 공기 중의 이산화탄소를 고정화하여 생성되는 바이오매스(biomass)로부터 다양한 에너지 및 물질을 생산하는 연구는 석유고갈과 환경문제 해결의 한 방안으로서 활발히 진행되어 왔으며, 앞으로도 그 지속 가능성과 환경 친화성에 의해 바이오에너지 이용 및 보급은 꾸준한 증가세를 보일 것으로 전망된다. 바이오디젤, 바이오에탄올의 경우는 미국, 브라질, EU, 한국 등에서 상용화되어 사용되고 있으며 그 생산량이 계속적으로 증가하고 있다. 하지만, 바이오연료의 보급 증가는 식량 자원과의 충돌과 열대우림 파괴 등의 부작용을 일으키고 있다. 이러한 문제 해결의 일환으로 단위면적당 생산성이 대두, 유채보다 월등한 것으로 보고되는 미세조류에 대한 관심이 증가하고 있으며 우수 미세조류종 개발, 미세조류 고속배양 및 수확, 미세조류로부터 에너지 및 유용물질, 소재 생산에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 미세조류로부터 바이오디젤 원료유를 생산하기 위해 Soxhlet을 이용한 추출 방법을 이용하였다. 추출되는 오일은 사용 용매의 극성에 따라 물성과 추출 효율에 차이가 큰 것으로 나타났다. 강한 극성의 용매일 경우, 엽록소와 단백질이 같이 추출되는 문제가 있으며 약한 극성 용매는 세포벽의 방해로 용매가 세포내부로 흡수되지 못하는 문제가 있다. 추출 효율이 높은 극성용매의 경우 불순물을 제거해야 고순도의 바이오디젤의 생산이 가능하고 비극성 용매는 추출 오일의 물성은 좋으나 수율이 매우 낮게 측정되었다. 이러한 동시추출을 방지함과 동시에 추출 효율을 높이기 위해 본 연구에서는 세포벽 파괴 후 용매추출하는 방법으로서 미세조류를 Microwave에 노출시켜 오일 추출율을 증가시키는 전처리 연구를 수행하였다. 전처리시, Microwave에 의한 열 발생은 미세조류를 탄화시키기 때문에 열매체로서 물을 혼합하여 탄화를 방지하고 세포벽 내외부의 가열효과로 세포벽을 파괴하고자 하였다. Microwave에 의한 에너지 손실을 줄이며 세포벽 파괴에 효과적인 수분혼합비를 조사하였으며 Microwave에 노출 후 잔류수분을 건조하고 효율적으로 용매를 접촉시키기 위해 분쇄를 수행하였다. 모든 전처리 반응을 거친 미세조류에서 약 2배 증가된 추출수율을 얻을 수 있었으며, SEM을 통해 전처리 미세조류와 미전처리 미세조류를 분석해본 결과 전처리 미세조류의 다공성이 증가함을 확인하였다. 또한, 90%의 메탄올에 미세조류를 녹여 엽록소 함유량을 측정한 결과, 전처리 미세조류의 엽록소가 미전처리 미세조류보다 약 7배가량 감소함을 확인할 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.385-386
• /
• 1973

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.253-261
• /
• 1991

Polyamic acids, precursor polymers of polyimides have been obtained by the solution polycondensation of benzophenone tetracarboxylic dianhydride (BTDA) with 4, 4'-diamino diphenyl methane (MDA) and/or 3, 3'-dimethyl benzidine (OTB). The reaction was carried in two solvent systems such as m-cresol and m-cresol/xylene mixture. The results of TGA analysis showed that the polyimide films had good thermal stability with the initial decomposition temperature ranging from $540^{\circ}$ to $590^{\circ}$. According to DSC analysis of polymers, the glass transition temperature was over $340^{\circ}$. Polyimide film samples, showed good mechanical and electrical properties, had over $16Kg/mm^2$ of tensile strength and about 200 KV/mm of dielectric breakdown voltage. The properties of the copolymer from MAD/OTB were better than those of the homopolymer from MDA. And the polymer synthesized in m-cresol had lower properties than that obtained in m-cresol/xylene.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.37-45
• /
• 2014

Solvent extraction experiments have been performed to separate Nd and Pr from chloride leaching solution of monazite sand using single Cyanex272 and mixed extractants as PC88A+Cyanex272 and PC88A+TBP. For this purpose, the effect of the concentration of extractants on the extraction and separation of the two metals were studied by varying the pH of aqueous solution. In the experimental ranges conducted in this study, the distribution coefficients of Nd were higher than those of Pr. In Cyanex272 system, our results indicated that concentration of extractant and initial pH did not affect distribution coefficients, but separation factor was increased with increasing initial pH. In binary extractant system, distribution coefficients were lower than those of single PC88A system, whereas separation factor was similar in both mixed and single extractant system.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.123-129
• /
• 1990

The rate constants for the solvolysis of $trans-[Cr(en)_2Br_2]^+$ ion were determined by the spectrophotometric method in methanol-, ethanol-, acetone-, and acetonitrile-water mixtures, at 20, 25, 30, and 35$^{\circ}C$, respectively. The rate constants increased with increasing co-solvent compositions. The rate constant did not show any relation with the reciprocal of dielectric constant of the solvent-mixtures. The m values of Grunwald-Winstein equation for methanol-, ethanol-, acetonitrile-, and acetone-water mixtures are 0.109, 0.103, 0.101, and 0.095, respectively. A free energy cycle for the process from the initial state to the transition state in water and water + co-solvent mixtures shows that the change in solvation at the transition state has a dominant effect on the rate. From the above results, it is believed that the mechanism for the aquation of this complex is the Id mechanism.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.169-172
• /
• 2000

A new gel polymer electrolyte based on the modified polyacrylonitrile (PAN), polyacrylonitrile-co-bis[2-(2-methoxyethoxy)ethyl]itaconate (abbreviated as PANI) copolymer was synthesized in expectation of enhanced trapping ability of liquid electrolytes. PAN and PANI blend was complexed with organic solvents, ethylene carbonate (EC) and dimethyl carbonate (DMC), and $LiClO_4$ salt. The highest room temperature conductivity of $2\times10^{-3}\;Scm^{-1}$ was found for a film of 25PAN+10PANl+50EC/DMC+$15LiClO_4$. The solvent-rich crystalline part decreases due to the blending of PANI and therefore number of charge carriers increases giving higher ionic conductivity. The addition of PAM as a host polymer in the PAN-based gels has beneficial effects such as higher ionic conductivity, better thermal characteristics, better miscibility with solvent, wider electrochemical stability, and better interfacial stability with lithium electrode, though it exhibits slightly less mechanical rigidity.

• Membrane Journal
• /
• v.15 no.1
• /
• pp.22-33
• /
• 2005

Asymmetric PVDF membranes were prepared by the phase inversion from casting solutions containing PVDF, NMP as solvent and 1,4-dioxane, DGDE, acetone, or GBL as additives by immersing them in water. The effects of various additives on the casting solution properties, permeation properties, and membrane structures were investigated. Low miscibility of 1,4-dioxane, DGDE and acetone with the coagulant (water) compared with NMP resulted in reducing the membrane pore size. When DGDE is used as an additive, the pore size was reduced because of its incipient sharp interface formation in the water. GBL increased membrane pore size because of its polarity compared to that of NMP. The PVDF membranes with various pore sizes could be obtained by controlling the amount of additive. The effect of mixed solvent (aqueous and non-aqueous solution) on permeation through membrane was investigated. Not only solution viscosity but surface tension affected solvent permeation.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.137-141
• /
• 1992

To investigate some factors on oleoresin extraction from red pepper, the content of yield, capsanthin and capsaicin in oleoresin extracted under various factors such as solvent, variety of materials, extraction time and temperature, storage condition of dried red pepper and its parts, particle size of raw material powder and the ratios of red pepper powder to extraction solvent were investigated. Ethyl alcohol and ethylene dichloride were effective in extracting capsanthin and capsaicin from red pepper, respectively. Mixed-solvent bore fruitful in increasing of oleoresin yield, but was fruitless in extracting capsanthin and capsaicin in comparison with single-solvent. In three varieties such as Juktoma, Jinsol and Dabok, Jinsol was excellent in oleoresin extraction. Optimum extracting temperature and time was $20^{\circ}C$ and three to five hours, respectively. Oleoresin quality from long-term storage and/or coarse red pepper were low in point of yield, capsanthin and capsaicin. Capsanthin and capsaicin were distributed into pericarp and seed in abundance, respectively. Optimum mixing ratio of red pepper powder to extracting solvent was suitable for one to three(1 : 3) or one to four(1 : 4) in oleoresin extraction.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.632-637
• /
• 2010

Liquid-liquid equilibrium data for the quaternary system water +tetrahydrofuran + butyl acetate + isoamyl alcohol mixture were measured at 298.15 K and atmospheric pressure. Binodal curves, tie-lines, distribution, and selectivity for the quaternary system have been determined in order to investigate the effect of using binary solvents, butyl acetate and isoamyl alcohol, on extracting tetrahydrofuran from aqueous solution. In addition, these experimental tie-line data were also compared with the values predicted by the UNIFAC model. For the quaternary system, an average root-mean-square deviation for the system in 75/25, 50/50, and 25/75 mass ratios as mixed solvents are(3.35, 5.21 and 5.65) %, respectively.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.391-395
• /
• 2007

This study investigated the feasibility of enhanced electrokinetic (EK) remediation of soil contaminated with approximately 20000 Pb-mg/kg. Enhanced EK remediation was evaluated by using mixed solution (0.3 M acetic acid and 0.03 M EDTA, EK-M) and by exchanging electrodes for preventing precipitation of metal hydrate. For the EK-M, the lead removal efficiency was only 2% lower than the case where 0.03 M EDTA was solely used (EK-Blank, EK-B). Considering the costly expense of EDTA, the application of EK-M would be economically viable. The efficiency of of EK-E was higher by 2% than the EK-B method. More impertantly, the pH values of entire soil packed column presented to be neutral (7~8) in the EK-E process. Unlike to EK-B and EK-M, the deposition of heavy metals to any specific area was avoided in the EK-E process.