• Title/Summary/Keyword: 혼합열

Search Result 1,489, Processing Time 0.035 seconds

Kinetics of the Low-temperature Pyrolysis of Mixed Plastics in the Batch Reactor (회분식반응기에서의 혼합 플라스틱의 저온열분해 kinetics)

  • Cha, Wang Seog;Oh, Myung Seog;Jang, Hyun Tae;Tae, Beomseok
    • Korean Chemical Engineering Research
    • /
    • v.46 no.3
    • /
    • pp.540-544
    • /
    • 2008
  • Pyrolytic characteristics of mixed plastics containing 22 wt.% HDPE, 17 wt.% LDPE, 27 wt.% PP, 12 wt.% PS, 16 wt.% ABS, 6 wt.% PVC have been studied in the batch-type microreactor of stainless steel. Thermal degradation experiments were performed at temperature of $410{\sim}450^{\circ}C$. The yield of each pyrolytic products were obtained by the weight measurement and molecular weight distribution of pyrolytic liquid products determined by the GC-SIMDIS method. It was shown that the yield and molecular weight of pyrolytic liquid product were decreased with the increase of reaction temperature and time. It was know that 20wt% of PVC composing of the mixed plastics was converted to the gas products of chloride during the pyrolysis process. The chain-end scission rate parameter was determined to be 50.2 kcal/mole of mixed plastics by the Arrhenius plot.

A Model for Atomic Transport at Low Temperature Ion Mixing (저온에서 이온선 혼합시 야기되는 원자이동에 대한 모형)

  • 채근화;송종한;정성문;장홍규;주장헌;강석태;최범식;김상옥;황정남
    • Journal of the Korean Vacuum Society
    • /
    • v.2 no.1
    • /
    • pp.58-64
    • /
    • 1993
  • 이온선혼합의 열충격으로 야기되는 등방저기 또는 이방적 원자이동을 정량적으로 묘사하기 위한 모형을 제시하였다. 불순문 확산에서 원자들의 이동비는 구성원자들의 활성화에너지에 의존한다. 이 모형은 0에 가까운 혼합열과 비교적 높은 활성화에너지를 가진 이중층들의 실험결과들을 만족스럽게 예견한다. 불순물 확산에서 구성원자들의 활성화에너지가 크게 차이가 나는 계들은 이방적 원자이동을 보여주는 반면, 비슷한 활성화에너지를 가지는 계들은 등방적 원자이동을 나타낸다.

  • PDF

An Experimental Study on Thermal Efficiency Characteristics with Propane-DME Mixture Ratio for Residential Gas Range (Propane-DME 혼합비율에 따른 가정용 가스레인지의 열효율 특성에 관한 실험적 연구)

  • Ahn, Jae-Uk;Hwang, Hyun-Cheol;Kim, Young-Gyu;Kwon, Jeong-Rock
    • Journal of the Korean Institute of Gas
    • /
    • v.12 no.3
    • /
    • pp.81-84
    • /
    • 2008
  • In this paper, the research was applied the mixture gas of Propane-DME (dimethyl ether) for being commercialization to residential gas ranges. In order to examine a correspondence between Korean Standard and thermal efficiency characteristics at each burner, experiments were performed with 100% Propane and the mixture gas of 80% Propane-20% DME. The experimental results were shown that the higher a mixture ratio of DME was used, the lower a thermal efficiency was gained. Those were due to low caloric value of DME. With 80% Propane-20% DME mixture gas, one of residential gas ranges was not satisfied the condition for the thermal efficiency value, 40%, Korean Standard. Consequently, the research needs about the standard for being commercialization to the mixture gas of Propane-DME.

  • PDF

Pyrolytic Reaction Characteristics of a Mixed Fuel of Municipal Solid Wastes and Low-grade Anthracite (도시생활폐기물과 저품위 무연탄 혼합연료의 열분해 반응특성)

  • Oh, Kwang-Joong;Lee, Hyung-Don;Seo, Jong-Beom;Jeon, Soo-Bin;Cho, Sang-Won
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.32 no.11
    • /
    • pp.1046-1053
    • /
    • 2010
  • The objective of this study was to investigate the pyrolytic reaction characteristics of a mixed fuel of municipal solid wastes and low-grade anthracite. The reaction variables are pyrolysis condition of mixing ratio, reaction temperature, temperature increase rate. As a result, the optimum mixing ratio was 20 wt.% low-grade anthracite in MSW, which maintains for the low heating value over 3,500 kcal/kg on pyrolysis. The most high reaction velocity constant was shown at $700^{\circ}C$. Also, under the all experimental condition, the reaction velocity constant increased linearly as temperature rate increase, but pyrolysis has to be considered electric power cost and yield of char at lower temperature rate.

Predictions of Heat and Mass Transfer Rates to a Spray Droplet Experiencing Condensation (응축을 수반하는 분무수적으로의 열 및 질량전달률 예측)

  • 이상균;조종철;신원기;조진호;서정일
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.15 no.5
    • /
    • pp.1763-1773
    • /
    • 1991
  • 본 연구에서는 포화수증기와 공기의 혼합기내에서 분무수적으로의 열 및 질량 전달률을 계산하기 위하여 수적의 부분혼합모형과 비혼합모형에 대하여 수적내 과도온 도분포의 해석해를 적용성이 보장되면서도 계산상의 어려움이 수반되지 않는 형태로 구하기 위하여 수적내부의 열전도해석에 있어서 적분법을 적용하였다. 적분법으로 얻어지는 과도온도분포의 해는 유한차의 다항식으로 표시되어 비혼합모형인 경우 각시 간 구간의 경계에서의 온도분포가 연속성을 유지하면서 물성치들의 온도에 대한 종속 성이 쉽게 고려되고 계산도 용이한 형태이다. 본 보에서 제시하는 해석결과의 적용 성을 조사하기 위하여 완전혼합모형을 포함하는 세가지 수적모형들에 대한 계산결과들 로부터 얻어진 시간변화에 따른 수적의 무차원 체적평균온도변동을 유효한 실험결과들 과 비교, 검토하였으며, 부분혼합모형에 대하여 혼합기의 압력, 수적의 초기온도, 혼 합기 속에 포함되어 있는 수증기의 체적분율, 수적의 초기크기, 수적의 초기속도 및 분사각도가 주위혼합기로부터 수적으로 전달되는 열 및 질량전달에 미치는 영향을 조] 사하고 도출된 대표적인 검토 결과를 제시하였다.

Separation of wasted plastics by thermal adhesion (열 점착을 이용한 혼합 폐 플라스틱의 선택적 분리)

  • Lim Seok ki;Cho Hee chan
    • Resources Recycling
    • /
    • v.12 no.4
    • /
    • pp.44-50
    • /
    • 2003
  • Separation of mixed plastics is not a simple task due to similarities of specific gravity and limitations of sizes, etc. In this study, a new technique was developed to separate plastics selectively by a thermal adhesion method using the different softening or melting temperatures of various types of plastics. Tests were conducted to investigate softening or melting temperatures and adhesion probabilities of plastics with change in temperature. Tests also were conducted to analyze the operating variables, including contact times, size and color pigment. It was founded that LDPE, HDPE and PVC, PET, etc among mixed plastics could be separated selectively according to the change of temperature.

The Effect of Solvent and Solvent-Additives of Polymeric Dope Solutions on Membrane Morphology (용매와 용매 첨가제가 고분자 막 구조에 미치는 영향 연구)

  • 원종옥;박철민;강용수;박현채;김은영
    • Membrane Journal
    • /
    • v.7 no.4
    • /
    • pp.191-198
    • /
    • 1997
  • Membrane formation mechanism by the phase inversion has been investigated in order to control the membrane morphology. It was found that finger-like structures were obtained when the heat of mixing between the solvent and non-solvent is exothermic, while sponge-like structures were obtained when they are endothermic in polystyrenes as well as in polyimides (Torlon and polyimide made frorn 3,3'4,4'-benzophenontetracarboxylic diahmydride and 1,4-phenylene diarnine) membranes. This concept was applied to control the morphology of polysulfone membranes simply by adding a solvent additive by adjusting the heat of mixing. A crude, but simple, relationship between the heat of mixing and the exchange rate of the solvent with non-solvent has been also developed.

  • PDF

Occurrence and Mineralogical Properties of Clay Minerals in the Gosari Pottery Stones Mine in Taebek, Kangweon-do (강원도 태백시 고사리도석광산에 산출하는 점토광물의 산상 및 특성)

  • 황진연;정윤영
    • Journal of the Mineralogical Society of Korea
    • /
    • v.7 no.2
    • /
    • pp.97-110
    • /
    • 1994
  • 고사리광산의 도석에는 다량의 석영과 함께 녹니석/스멕타이트 혼합층광물, 운도/스멕타이트 혼합층광물, 카오리나이트와 같은 점토광물이 산출한다. 이들 점토광물에 대해 주로 X-선회전분석과 화학분석 등을 이용하여 광물학적 특성을 검토하였다. 이 광산의 도석은 녹니석/스멕타이트 혼합층광물을 다량 함유하는 것이 특징으로 나타났다. 이 녹니석/스멕타이트 혼합층광물은 Li을 함유하는 돈바싸이트로 된 녹니석층과 바이델라이트에 가까운 스apr타이트층으로 구성된 혼합층구조를 이룬다. 이 곳에 산출하는 운모/스멕타이트 혼합층광물은 모두 약 15% 이하의 팽윤층을 포함하는 것으로 되어 있다.이 광산의 도석은 백악기의 유문암 및 유문암질 응회암이 열수변질작용을 받아 형성된 것으로 나타났다. 점토광물조합의 분포상태에 의해 대략적인 변질분대가 나누어진다. 중심부인 강변질대에서는 다량의 녹니석/스텍타이트 혼합층광물이 나타나며 카오리나이트가 수받되기도 한다. 그 외곽지역의 약변질대에서는 점토광물로서 운모/스멕타이트 혼합층광물이 주로 나타난다. 카오리나이트는 주로 열극이나 그 주위에 국부적으로 산출되는 경향이 있다. 이와 같은 변질광물의 산출상태로 볼 때 변질작용의 진행에 따라 운모/스멕타이트 혼합층광물이 먼저 형성된 후 이것의 일부가 녹니석/스맥타이트 혼합층광물 및 카오리나이트로 변화된 것으로 생각된다. 도 카오리나이트는 열수의 공급이 많은 열극부에서 녹니석/스멕타이트 혼합층 광물과 거의 동시기에 침전된 것으로 생각된다. 이 광산에서 산출하는 일부 운모/스멕타이트 혼합층광물은 후기의 변질작용에 의해 형성된 것도 포함된다.

  • PDF