• 한국해양학회지
• /
• v.22 no.3
• /
• pp.207-215
• /
• 1987

The Keum River Estuary was investigated two times in April and July, 1986, to study process controlling chlorophyll distribution in estuarine waters. During the surveys, distribution patterns were studied for chlorophyll-a, nutrients, ph, SPM (Suspended Particulate Matter), DO (Dissolved Oxygen), temperature, salinity, etc. During April survey(low-discharge period), sea water penetrated to Kangkyung, about 35km upstream from the constructing weir, while in July (high-discharge period) only to 3 km upstream from the weir,In April SPM showed very high concentrations (500mg/l)on the average. But very low concentrations(about10mg/l)were observed in July due to high discharge of fresh water.Chlorophyll-a concentrations showed large variations both in time and space :much higher concentraations in July than in April and sharp decrease in concentrations at the fresh water-sea water interface (April:$6.5\mu\textrm{g}/{\ell}$ for fresh waters and 41.4\mu\textrm{g}/{\ell}$ forestuarine waters). Differebce ub chlorophyll-a concentrations for these two surveys appear to be caused mainly by the difference in effectiveness of penetrating lights controlled by SPM in the waters. Sharp decrease in chlorophll-a at the fresh water-sea water interface is believed to be resulted from mass mortality of fresh water phytoplankton caused by changes in osmotic pressure in the region. Observations in the same regions such as increase in AOU(Apparent Oxygen Utilization)and ammonia, decrease in PH,probably resulted through decomposition processes of dead planktons,furtuer support the idea.

• Journal of Mushroom
• /
• v.9 no.2
• /
• pp.69-73
• /
• 2011

We have researched on methods which can reduce fruit-body malformations of king oyster mushroom(Pleurotus eryngii). We collected many pathogens from diseased fruit-body or malformated fruit-body and identified with chemicobiological test and microscope. The factors of fruit-body malformations and increment of contamination during the pin-heading induction time were researched with ventilation amounts in growing room. When the pathogens having high pathogenicity were inoculated in spawn running bottle and at pin-heading induction time, symptom appeared or not appeared in according to air ventilation amounts in growing room. During the pin-heading induction time, humidity degree in growing room have kept of high level and air ventilation amounts were so little that fruit-body malformations ratio was high. But, even though pathogens were inoculated at the surface of bottle factitiously, if air ventilation amounts were enough, fruit-body malformation ratio was low.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.430-439
• /
• 2020

This study focused on analyzing solid brown cosmetic residues that were excavated from the tomb of the Hwahyeop princess. The cosmetics had been buried in 1752 in Cheonghwa Baekja (small porcelain jars) within a Huigwakham (a stone box sealed with lime). A literature search and chemical analyses of the relics were conducted at the National Palace Museum of Korea. Based on the results of these analyses, raw materials and manufacturing methods for reproduction of the cosmetic were selected and then cream-form cosmetics were prepared. Aging tests using heat, ultraviolet (UV) radiation, and CO₂ were carried out to emulate the deterioration of the excavated cosmetics. Further chemical analyses and functionality tests were performed to evaluate changes from the tests and the effect as a cosmetic. As heat aging progressed, among the reproduced cosmetics, the one which has a high proposition of oil showed a color difference value of 32; the oxidation of oils involved chemical changes in O-H and C=C groups. As the cosmetic cream deteriorated under UV aging, the pH value became acidic. The result of the functional coverage test of the reproduced cosmetic cream was lower than the standard coverage ratio of modern cosmetics.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.122-134
• /
• 2002

목적 : 근관 치료의 최종 목적인 근관계의 영구적인 충전을 위해 사용되는 근관 봉함제는 많은 연구와 개선을 거쳐서 현재는 다양한 성분의 봉함제가 시판되고 있다. 이중에서 레진이 주성분인 봉함제는 조작이 편리하고 흐름성이 좋으며 근관의 벽에 높은 밀폐성을 보이고 충분한 작업시간과 높은 방사선 불투과성을 가지는 장점을 가짐에도 불구하고 높은 초기 생체 독성을 나타내는 단점을 가지고 있다. 본 실험에서는 기존의 상용화된 제품 중 레진이 주성분인 두 종류의 봉함제(AH 26, AH plus)와 산화아연이 주성분인 봉함제(Pulp Canal Sealer EWT)와 국내에서 새로이 개발한 제품으로서 레진이 주성분인 두 종류의 봉함제(Adseal-1,2)를 생체조직에 매식하여 국소적인 반응을 비교하여 생체친화성을 알아보고자 하였다. 방법 : 수종 봉함제의 생체 친화성을 알아보기 위하여 64마리의 Sprague-Dawley rat을 사용하였다. 봉함제의 피하조직 매식을 위해 길이와 직경이 각각 5와 1.5mm인 폴리에틸렌 테프론 관을 사용하였으며 이를 에탄올과 증류수로 세척 한 후 고압증기멸균을 시행하였다. Rat에 대하여 케타민으로 복강내 마취를 시행한 후 배부를 면도하고 iodine으로 소독한 다음 네 곳에 절개를 시행하였으며 blunt dissection을 통해 깊이 10mm이상의 피하조직 pocket을 형성하였다. 각각의 봉함제를 제조사의 지시 에 따라 혼합 후 즉시 멸균된 테프론 관에 주사기를 이용하여 담은 다음에 봉함제가 흐르지 않게 유의하며 pocket내로 삽입하였으며 이때 16개의 관을 대조군으로 사용하기 위해 봉함제를 넣지 않은 상태로 삽입하였다. 이 후 절개 부위를 surgical gut suture로 봉합하였으며 1주일 후에 발사하였다. Rat을 1, 2, 4, 12주 후에 각 군 당 세 마리 씩 에테르 흡입을 통해 희생하였으며 이 때 한 마리씩의 대조군도 포함시켰다. 이 후 매식된 관을 주위 조직과 함께 제거하고 포르말린에서 48시간 고정시킨 후 파라핀에 포매한 다음에 micro-tome을 사용하여 6$\mu\textrm{m}$로 serial section을 시행하였다. 정중선 부위의 시편에 Hematoxylin-Eosin staining을 시행한 후 Olsson, Orstavik 그리고 Mjor 등의 방법에 따라 조직학적 변화를 관찰한 후 slight(1), moderate(2), severe inflammation(3)의 단계로 분류하였다. 얻어진 결과를 통계처리 프로그램인 Jandel사의 Sigmastat을 이용하여 Kruskal Wallis Test로 통계처리를 하였다. 결과 : (Table omitted) 결론 : 1) Pulp Canal Sealer를 제외한 모든 군에서 시간이 지남에 따라 유의성 있게 염증이 감소되는 양상을 보였다(p<0.05). 2) Pulp Canal Sealer는 1주, 2주, 12주에서 강한 염증반응을 보였다. 3) AH 26과 AH Plus에서는 1주, 2주에서 강한 염증반응을 보였으나 12주에서는 염증반응이 감소하였다. 4) 새로 개발된 봉함제 Adseal-1,2는 1주, 2주에서는 가장 약한 염증반응을 보이나 4주, 12주 후에는 AH Plus와 비슷한 수준의 염증 반응을 보였다. 5) Pulp Canal Sealer를 제외한 모든 군에서 인정할 만한 생체친화성을 보였다. 6) Adseal-2가 Adseal-1에 비하여 전반적으로 낮은 염증반응을 보였다. 7) 각 군간 결과의 차이에 통계적 유의성은 없었다(p>0.05).

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.361-367
• /
• 2004

The axial compressive strength, relative 3-D stability and osteoconductive shape design of an intervertebral fusion cage are important biomechanical factors for successful intervertebral fusion. Changes in the stress distribution of the vertebral end plate and in cage stability due to changes in the spike shape of a newly contrived box-shaped fusion cage are investigated. In this investigation, the initial contact of the cage's spikes with the end plate and the penetration of the cage's spikes into the end plate are considered. The finite element analysis is conducted to study the effects of the cage's spike height, tip width and angle on the stress distribution of the vertebral end plate, and the micromigration of the cage in the A-P direction. The stress distribution in the end plate is examined when a normal load of 1700N is applied to the vertebra after inserting 2 cages. The micromigration of the cage is examined when a pull out load of l00N is applied in the A-P direction. The analysis results reveal that the spike tip width significantly influences the stress concentration in the end plate, but the spike height and angle do not significantly influence the stress distribution in the end plate touching the cage's spikes. In addition, the analysis results show that the micromigration of the cage can be reduced by adjusting the spike angle and spike arrangement in the A-P direction. This study proposes the optimal shape of an intervertebral fusion cage, which promotes bone fusion, reduces the stress concentration in a vertebral end plate, and increases mechanical stability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.178-184
• /
• 2017

This study was aimed to investigate the tensile behaviors of PE(Polyethylene) fiber-reinforced highly ductile cementitious composites with different combinations of micro silica sand and normal sand(river sand) with maximum particle size of 4.75 mm. Flow test result indicated the increase of flowability with higher replacement ratio of river sand. There was no noticeable difference in the mean compressive strength with different replacement ratio of river sand, but the variation in the compressive strength increased as higher amount of river sand was adopted for the replacement. The difference in the uniaxial tensile strength was negligible, but the tensile strain capacity was significantly influenced by the replacement ratio of river sand. It is thought that increased density of multiple cracks induced improved tensile strain capacity when higher percentage of river sand was adopted for fine aggregate. The deviation in the strain capacity increased as the replacement ratio of river sand was higher, as in the compressive strength. This study presented the feasibility of using normal sand instead of micro silica sand for highly ductile cementitious composites with equivalent or better uniaxial tensile performance, even though it might increase the deviation in the performance.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.270-277
• /
• 2002

Since founded in 1959, it's well known that the KAPD has pioneered in the researches and clinical aspects of pediatric dentistry in Korea. It's official journal, the Journal of the KAPD, was first published in 1974 and has pressed total 956 articles up to now(March, 2001). In this study, all the articles pressed in this journal have been surveyed, focussing in their main theme, their chronological and thematic distribution. The thematic classification was made with the reference of the previous studies and renowned textbooks in pediatric dentistry. And we obtained the results as follows: 1. The researches on dental materials and dental equipments have shown continuous increase throughout the period. 2. The researches on dental caries, caries prevention and systemic disorders have occupied relatively high proportion consistently. 3. The researches on malocclusions and cysts/minor surgery have shown increasing tendency in the second period, but are decreasing in the third period. 4. The researches on craniofacial growth/development, tooth development/eruption, developmental disorders of teeth, management of eruption space have shown decreasing tendency. 5. The researches on behavioral research, oral habits, occlusion of primary-mixed dentition have shown very low proportion, reaching no more than 1% throughout the period.

• Journal of Life Science
• /
• v.26 no.10
• /
• pp.1153-1162
• /
• 2016

Termitomyces albuminosus (Berk.) Heim is a well-known wild edible mushroom in the southern region of China. Novel cerebrosides, termed termitomycesphins, isolated from EtOH extract of T. albuminosus have shown significant neuritogenic activity. Neurotrophic factors have been targeted as potential therapeutic drugs for the treatment of neurodegenerative disorders. However, before expanding their applications to include food or therapeutic agents in Korea, a safety evaluation of T. albuminosus is needed. Herein, in a repeated-dose 90-day oral toxicity study, rats were exposed to a basal diet of powder ground from dried T. albuminosus at dose levels of 5%, 2.5%, 1.25%, and 0%. The following endpoints were evaluated: clinical observation, body weight, gross and microscopic pathology, clinical chemistry, and hematology. Significant dose-dependent increases in the weight of the left kidney were observed, possibly due to the test substance. Based on toxicity-decision criteria for minor compound-related changes (no observed adverse effect level [NOAEL] and no observed effect level [NOEL]), NOAEL was observed in male rats at a dose of 5% of dried T. albuminosus powder, and NOEl was observed in female rats at the same dose. The results point to the safety and potential use of T. albuminosus as a nontoxic neurotrophic factor.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.77-84
• /
• 2015

The key objective of this research is to review the effectiveness of spatial regression to identify the influencing factors of spatial distribution patterns of floating population. To this end, global and local spatial autocorrelation test were performed using seoul floating population survey(2014) data. The result of Moran's I and Getis-Ord $Gi^*$ as used in the analysis derived spatial heterogeneity and spatial similarities of floating population patterns in a statistically significant range. Accordingly, Geographically Weighted Regression was applied to identify the relationship between land use attributes and population floating. Urbanization area, green tract of land of micro land cover data were aggregated in to $400m{\times}400m$ grid boundary of Seoul. Additionally public transportation variables such as intersection density transit accessibility, road density and pedestrian passage density were adopted as transit environmental factors. As a result, the GWR model derived more improved results than Ordinary Least Square(OLS) regression model. Furthermore, the spatial variation of applied local effect of independent variables for the floating population distributions.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1994.10b
• /
• pp.15-15
• /
• 1994

M MA ODS 합금의 보다 폭넓용 실용확훌 위해 크게 요구되고 있는 적정 접합기술 개발의 한 방안￡로, 마찰압접(Friction Welding) 방법의 가능성옳 조사하기 위하여 마찰압력과 시간, 마 찰 후 접촉압력(Upset Pressure) 풍을 다양하게 변화시켜 접합체톨 제조한 후, 접합체 강도에 대한 인장시험과 접합계연의 결합 및 미세구조에 대한 현미경 관찰, EDS에 의한 원소분석, 접 합이옴부의 경도분포와 파단면 분석 풍율 행하였다. 실험에 사용된 모재는 기계적 합금법으로 제조된 Inca사의 Ni기 MA 754 합금이었으며, 직경 l 10 mm, 길이 50 mm로 가공한 후, 아세통￡로 초음파 세척하여 접합에 사용하였다. 접합온 브 레이크식 마찰압접기틀 사용하여 행하였으며, 회전시험편의 회전수는 2400 rpm이었A며, 다른 한쪽의 고정시험편과의 마찰압력 및 마찰시간온 각각 50 - 500 MPa과 1-5초로, 또한 업셋압 력도 50 - 600 MPa로 변화시켰다. 이때 업셋압력은 모든 시편에 대해 일정하게 6초동안 가하 였다. 얻어진 접합체는 각 압접조건 당 2개 이상의 접합시험편에 대해 상온 인장강도톨 측정하 였으며, 파단이 일어난 위치를 확인한 후 파면에 대한 분석율 주사전자현미경(SEM)과 에너지 분산형 분광분석기mDS)릎 사용하여 행하였다. 컵합이옴부의 첩합성올 확인하기 위하여, 접합 체를 접합변에 수직으로 절단, 연마한 후 광학현미경과 SEM, EDS 퉁으로 관찰, 분석하여 접 합부의 형상과 결합형성 여부, 접합계면의 미세조직 퉁옳 조사하였다. 또한 마찰압접에 따론 모재와 접합계연부의 경도분포훌 접합이옴부로부터 모재쪽으로 일정 간격율 두어 마이크로 비 커스 경도기로 측정, 조사하였다. 이상의 설험 결과, 다옴과 같온 결론옳 얻었다. ( (1) 접합체 강도가 모채 강도의 95% 이상이 되는 양호한 렵합체흩 얻기 위한 마찰압력 조건 온, 2400 rpm의 회전속도와 6초의 업셋압력 유지시간에서 마찰압력과 업셋압력, 그리고 마찰시 간이 각각 400 MPa 이상과 500 MPa 이상,2초입율 확인하였다. ( (2) 컵합이옴부의 관찰 결과, 모든 마찰압접 조건에서 컵합이옴부는, 기폰 모재의 texture 조직 을 유지하고 있는 모재부 영역(영역 ill)과 첩합계면부에 인접하여 업셋압력이 주어질 때 단조 효과에 의해 계연 외부로 metal flow가 일어나면서 형성된 영역 II, 매우 미세한 결정립으로 구성된 중앙부의 영역 1 로 이투어져 있옴융 확인하였다. ( (3) 최적접합조건이 충족되지 않온 경우, 접합부의 영역 I 에서 관찰된 void와 균열, 불균일한 접합계면 통의 접합결함에 Al과 Y. Ti 퉁￡로 구성된 산화물률이 용집되어 있옴을 확인하였 다-( (4) 접합체의 파단 양상온 크게 접합부 파단과 모재부 파단, 이률의 혼합형 파단i로 나눌수 있었다. 모재부 파단의 경우, 파단면이 매끄럽고 파변상의 결정립도 매우 미세하였으며, 산확물 의 용집도 찾아보기 어려웠 나, 접합부 파단의 경우에는 파변의 굴곡이 비교척 심하고 연성 입계파괴의 형태를 보였￡며, 결정립도 모채부 파단의 경우에 비해 조대하였다. 조대하였다.