• Journal of Korean Society of Transportation
• /
• v.35 no.3
• /
• pp.220-233
• /
• 2017

Traffic volumes are fundamental data widely used in various traffic analysis, such as origin-and-destination establishment, total traveled kilometer distance calculation, congestion evaluation, and so on. The low number of links collecting the traffic-volume data in a large urban highway network has weakened the quality of the analyses in practice. This study proposes a method to estimate the traffic volume data on a highway link where no collection device is available by introducing a spatial statistic technique with (1) the traffic-volume data from TOPIS, and National Transport Information Center in the Ministry of Land, Infrastructure, and (2) the navigation data from private navigation. Two different component models were prepared for the interrupted and the uninterrupted flows respectively, due to their different traffic-flow characteristics: the piecewise constant function and the regression kriging. The comparison of the traffic volumes estimated by the proposed method against the ones counted in the field showed that the level of error includes 6.26% in MAPE and 5,410 in RMSE, and thus the prediction error is 20.3% in MAPE.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.7-18
• /
• 2006

Nowadays, the movement of commercial vehicles has caused severe congestion, environmental problems and damaged pavements in urban area. To solve the Problems, this research has proposed a methodology to build-up a freight network that is enable to manage the movement and demand of commercial vehicles. The network based on urban arterial network has developed according to freight traffic volume that is under the influence of road types among The in study area. Freight network has been developed by assignment method of 4-step transportation forecasting. Once, acceptable limits of freight traffic volume are decided, freight network can be developed using the capacity To confirm the application of the methodology, freight network of Seoul city has developed by the methodology.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.44-61
• /
• 2022

With the increase of truck traffic, roads are becoming more congested and the risk of accidents is also increasing. Since the fatality rate of traffic accidents caused by trucks is about 2 to 3 times higher than that of passenger cars and buses, it is urgent to prepare policies for truck traffic safety. While most of the previous studies focused on factor analysis that contributes to traffic accidents, this study presented traffic safety policies (4 major-criteria and 12 sub-criteria) for trucks through driver interviews and previous studies. Then, the priority of the policies was evaluated by using Fuzzy-AHP. As a result, the improvement of truck drivers' working environment was evaluated as the most important criteria, and followed by the improvement of road traffic conditions. In detail, there is an urgent need to improve the freight car fare system, ensure sufficient rest for drivers, and strengthen the crackdown of illegal parking and stopping along roads. This study is expected to be usefully utilized in preparing traffic flow safety policies in preparation for the continuous increase of truck traffic.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.74-83
• /
• 2011

The high-pass transportation information system directly collects section information by using probe cars and therefore can offer more reliable information to drivers. However, because the running condition and features of probe cars and statistical processing methods affect the reliability of the information and particularly because the section travel time is greatly influenced by whether there has been delay by signals on urban roads or not, there can be much deviation among the collected individual probe data. Accordingly, researches in multilateral directions are necessary in order to enhance the credibility of the section information. Yet, the precedent studies related to high-pass information provision have been conducted on the highway sections with the feature of continuous flow, which has a limit to be applied to the urban roads with the transportational feature of an interrupted flow. Therefore, this research aims at analyzing the features of high-pass transportation data on urban roads and finding a proper processing method. When the characteristics of the high-pass data on urban roads collected from RSE were analyzed by using a time-space diagram, the collected data was proved to have a certain pattern according to the arriving cars' waiting for signals with the period of the signaling cycle of the finish node. Moreover, the number of waiting for signals and the time of waiting caused the deviation in the collected data, and it was bigger in traffic jam. The analysis result showed that it was because the increased number of waiting for signals in traffic jam caused the deviation to be offset partially. The analysis result shows that it is appropriate to use the mean of this collected data of high-pass on urban roads as its representative value to reflect the transportational features by waiting for signals, and the standard of judgment of delay and congestion needs to be changed depending on the features of signals and roads. The results of this research are expected to be the foundation stone to improve the reliability of high-pass information on urban roads.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.3
• /
• pp.6-13
• /
• 2002

In this paper, we propose an image processing based method to measure red-time and green-time backward moving shockwave speed automatically at signalized intersections. Shockwave means the discontinuous boundary line between different vehicle traffic flows, and its moving speed is called shockwave speed which is obtain from the slope of boundary line. In this paper, we compose distance-time diagram for measuring shockwave speed automatically. By global vehicle tracking, we draw all of the vehicle moving path on distance-time diagram. We analyze the slope change pattern of curved moving path line, and compute red-time and green-time backward moving shockwave speed. We obtain the measurement result of shockwave speed, when applying above mentioned proposed method to experiment at signalized intersections, Once we can measure the shockwave speed, we could apply the result to highway ramp metering and automatic signal control at intersections effectively since we know the situation of frontal congestion easily.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.59-72
• /
• 2012

In aspects of traffic operation, a climbing lane may cause traffic congestion if the volume of traffic (v/c) grows and the ratio of heavy vehicle increases. Conversely, it would be effective, if the climbing lane is dynamically operated according to changes in traffic flow. However, there are no guideline to effectively control this climbing lane in aspects of traffic operation. In this study, we examine the necessity of flexible traffic operation criteria and its process for dynamic traffic management and also establish and analyze the effect of flexible traffic operation criteria in accordance with traffic properties using an example of climbing lane. We selected the operation criteria (critical travel speed), which decides whether to operate or close the climbing lane when the average travel speed of climbing lane is 50km/h based on VISSM (microscopic traffic simulation) analysis of Nakdong junction towards Masan with the volume of traffic (v/c), ratio of heavy vehicle as the traffic operation parameters. Based on the simulation result in accordance with the volume of traffic by the operation mode of climbing lane, the analysis on the effect of dynamic traffic management of climbing lane showed that the dynamic traffic management provides more convenience compare to the operation and close of climbing lane. Thereby, we proved that the dynamic traffic management of climbing lane is more effective.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.407-414
• /
• 2010

The fairway within the area of Yul-do and Songdo located near the Myeongnyang-sudo approaches south of Mokpo harbor is well guided by traffic separation scheme and other navigational aids. However, that part of the waterways where Yul-do is located sits at the cross-roads of marine traffic and is subjected to some potential risks in the voyage navigation: the effect of climatic phenomenon, the disregard of most ships in using the western sector of the fairway creating a congestion in the eastern sector, and lastly, the disadvantageous erect of the location and height of Yul-do island that hinders good lookout. This study investigates the environmental conditions that prevailed in the area in the span of 5-year period and the marine traffic situation taken from the data within the 72-hour period The navigational hazards and marine casualties are also be presented. The results are analyzed and are made the basis of a proposal for an improved separation of traffic. Thereafter, an evaluation is carried out by using the components of marine traffic flow simulation and ES modeling index. It is evaluated through simulation by the use of full-mission ship handling simulator.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.121-138
• /
• 2011

More affordable and available cutting-edge technologies (e.g., wireless vehicle communication) are regarded as a possible alternative to the fixed infrastructure-based traffic information system requiring the expensive infrastructure investments and mostly implemented in the uninterrupted freeway network with limited spatial system expansion. This paper develops an advanced decentralized traveler information System (ATIS) using vehicle-to-vehicle (V2V) communication system whose performance (drivers' travel time savings) are enhanced by three complementary functions (autonomous automatic incident detection algorithm, reliable sample size function, and driver behavior model) and evaluates it in the typical $6{\times}6$ urban grid network with non-recurrent traffic state (traffic incident) with the varying key parameters (traffic flow, communication radio range, and penetration ratio), employing the off-the-shelf microscopic simulation model (VISSIM) under the ideal vehicle communication environment. Simulation outputs indicate that as the three key parameters are increased more participating vehicles are involved for traffic data propagation in the less communication groups at the faster data dissemination speed. Also, participating vehicles saved their travel time by dynamically updating the up-to-date traffic states and searching for the new route. Focusing on the travel time difference of (instant) re-routing vehicles, lower traffic flow cases saved more time than higher traffic flow ones. This is because a relatively small number of vehicles in 300vph case re-route during the most system-efficient time period (the early time of the traffic incident) but more vehicles in 514vph case re-route during less system-efficient time period, even after the incident is resolved. Also, normally re-routings on the network-entering links saved more travel time than any other places inside the network except the case where the direct effect of traffic incident triggers vehicle re-routings during the effective incident time period and the location and direction of the incident link determines the spatial distribution of re-routing vehicles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.131-138
• /
• 2009

The purpose of this paper is the development of an agent-based pedestrian simulation model. The simulation model is based on the Cellular Automata theory. The model consists of four components: initialization, pedestrian generation, lateral movement, and front movement components. We have applied this model for experiment about pedestrian facility. In particular, we have experimented how the installation of fence is effective to resolve conflict pedestrian movements in different directions. We have found that the installation of the fence as a pedestrian facility can divide conflict moving pedestrians effectively. We have also found that the effect of the fence is bigger in slightly congested pedestrian flows than in severely congested pedestrian flows.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.115-128
• /
• 2002

Traffic engineers have developed and implemented various microscopic simulation models to verify the traffic performance and to prevent the expected problems. The existing microscopic simulation models categorize drivers into several types to reflect various drivers' driving patterns but miss the dynamics of drivers' behavior changed based upon the traffic conditions. It was found from the field data collected from two different merging sections on an urban freeway in Seoul, Korea, that the drivers' critical gap distributions are changed based on (1) the traffic density on the adjacent lane to the acceleration lane and (2) the opportunities left to merge in terms of distance to the end of acceleration lane. It was also found from the study that the drivers' critical gap distributions follow the Normal distribution. and its mean and variance change while a vehicle progresses on an acceleration lane. This paper proposes a new gap-acceptance model developed based on a set of drivers' critical gap distributions from each segment on the acceleration lanes. Through the comparison study between the field data and the results from the simulation utilizing the proposed model, it was verified that (1) the distribution of merging points on an acceleration lane to the adjacent main lane at different density levels, (2) the size of the gap accepted for merging and (3) the speed difference between the merging vehicle and the trailing vehicle at the time of merging are statistically identical to the field data at 95% confidence level.