• Elastomers and Composites
• /
• v.34 no.5
• /
• pp.391-398
• /
• 1999

Di-2-ethyl hexyl phthalate (DOP) and di-2-ethyl hexyl adiphate (DOA) were mixed with poly(vlnvl chlorides) [PVC] which have different degrees of polymerization (DP). Tensile strength, elongation, density, abrasion resistance, and hardness of these compounds were measured, High molecular weight PVC(DP 2500) was superior to that of DP 1300 for tensile strength, Hardness. But elongation and abrasion resistance of P1300 systems were better than those of P2500 systems. The densities of both systems were almost same. On the other hand, DOP Plasticized PVC was superior to DOA plasticized one for tensile strength, elongation, hardness. In cases of density, abrasion resistance, and flexual resistance, DOA systems were better than those of DOP systems.

• Journal of Korea Foundry Society
• /
• v.4 no.1
• /
• pp.12-20
• /
• 1984

In order to investigate the effect of size of sand grains, bentonite content and moisture on mixing power, standard mixing power, permeability, green compressive strength and green mold hardness were measured with mixing time, and also coated layer of mixed sand with time was observed by optical microscope and scanning electron microscope. From this experiment, the results were summarized as follows. 1. Mixing power increased as size of sand grains decreased. 2. Mixing power increased gradually as bentonite content increased and in particular, increased rapidly in 7-10% bentonite. 3. Mixing power increased as moisture content decreased. 4. The mixing time required to get the optimum mixing power decreased as moisture content and grain size increased, but increased as bentonite content increased.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.2
• /
• pp.83-101
• /
• 2000

In this experiment butadiene rubber(BR)/acrylonitrile butadiene rubber(NBR) blends was prepared and then the applicability of BR/NBR blends as printing rubber roller was examined. With the aid of open 2-roll mill, BR, NBR and another chemical additives were compounded. Then rubber vulcanizates were manufactured by hot press and maximum torque, Mooney viscosity, mechanical properties and oil resistance of the test specimens were measured. With prolonged oil aged treating time, BR/NBR blends became soft and so the hardness of blends decreased. It could be explained by the swelling of rubber matrix with oil penetration in to rubber molecules. The undesirable low value of oil resistance of BR was significantly improved by blending BR with NBR.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.6
• /
• pp.151-158
• /
• 1994

In this work, in order to inrprove the flexural strength of hardened portlarid cerncrit paste, mix ing water was reduced to water ccrnent ratio of 0.1 aid water soluble polymer such as hydroxy propyl methyl cellulose was adclelri to the paste to obtain a better dispersion. The paste was kneaded by the twin roll mill for cornpact and homogeneous mixing. The high strength mechanism of the hardened cement paste may be due to the removal of macropores larger than 100${\mu}m$, the reduction of capillary pores acting as the passage of crack propagation, the increase of Young's moculus with iticrease of unhytlratcci cenxxnt ard the incicasc of fracture toughnevs with the crack toughening mechanism (grain bridging, polymer fibril bridging and fritional inter-locking).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.653-657
• /
• 2000

The paper describes the contents and results of the national project named "Development of Computer Integrated Product Design for Automation Equipment". It is focussed on the real-time control '||'&'||' monitoring of manufacturing process for automobile rubber parts. Automobile rubber parts industy is one of the typical process that high11 depends upon manufacturing facilities and equipments. So. it requires high cost and engineering technolog) on plant implementation. But most companies of rubber parts industries are small or mid companies that habe weak abilities for plant implementation properly and systematically. Therefore, for upgrading the levelof automation. it is necessar). to dekelope the computer based management and monitoring slsteni that enables to build-up the common base of automation and systemization. 'Through this project. we developed low cost real-time monitoring system for banbun mixing process '||'&'||' mold injection process of rubbcr parts manufacturing, that is composed with DDCU(Distributed Digital Control Unit),signal interfaces to gathering mon~toring terms and speciall\ developed functional sofhare including some algorithm for management '||'&'||' process monitoring

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.671-677
• /
• 1996

본 논문은 Sr 페라이트 플라스틱자석의 자기특성에 관하여 연구한 것이다. Sr 페라이트의 조성은 SrO5,9Fe2O3에 CaO, SiO2, Na2SiO3 및 AI2O3를 미량 첨가하고, PVA(polyvinylalchohol) 7%수용액을 가하여 질소분위기에서 120$0^{\circ}C$, 2시간 소성하였다. PVA를 이용한 탄소코팅법으로 분말제조시 분쇄효과를 얻었으며, 페라이트의 함량을 증가시켜서 자기특성을 향상시켰다. Sr 페라이트분말과 폴리아미드 6을 75-90wt%로 혼련한 수 0-10 kOe의 자장을 인가하여 이방성 Sr 페라이트 플라스틱 자석을 제조하였다. 자석제조시 사출온도 27$0^{\circ}C$, 사출압력 120kg/$\textrm{cm}^2$, 자장으 세기 8 kOe 및 자장인가시간 6초에서 최적의 사출성형조건을 얻었다. 실험결과 자장중 사출성형법을 이용하여 제조한 이방성 플라스틱자석에서 (BH)max=-2.0MGOe의 특성을 얻었다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.332-335
• /
• 2011

원적외선, 음이온 방출과 항균, 탈취, 난연등의 효과를 가지는 황토를 합성수지와 혼합하여 복합소재를 연구하여 환경 친화적인 특징과 원적외선, 음이온의 방출을 이룰 수 있는 복합소재 조성을 연구하였다. PP는 MI가 2~60이고, TPE로 Ethylene계을 사용하였으며, 황토와 PP의 혼련을 도와주기 위하여 MA-g-PP를 첨가하였고, 활제, 분산제 및 산화방지제를 첨가하여 compounding 하였다. 또한 황토의 종류에따라 적황토, 호황토, 홍토, 백토, 흑토등으로 구분되고, 각각의 황토 마다 다양한 종류의 입도를 가지고 있으며, 또한 환경 친화적이며 난연성을 부여하기 위하여 다양한 조성으로 compounding 하였다, 황토의 종류에 따른 복합재료의 물성으로부터 기계적 특성치, 원적외선 방사율, 난연성등을 확인하고, 친환경 난연 복합소재 기술을 연구하였다. 적황토의 경우 황토의 함량이 많을수록 인장강도는 작아지는 경향을 나타냈으며, 입도가 작을수록 인장강도가 커지는 경향을 나타냈다. 파단신율의 경우 적황토(#2000)에서 가장 양호하게 나타났으며, 굴곡강도, 충격강도의 경우 적황토(#5000)에서 MI 의 경우 적황토(#325)에서 양호하게 나타났다.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.233-239
• /
• 2001

The ethylene propylene diene terpolymer (EPDM) blends with acrylonitrile butadiene rubber (NBR) were prepared by mechanical mixing method. Mooney viscosity, cure behaviors, compression set and dynamic mechanical properties were subsequently examined. Dynamic characteristics of the entire blends determined from a Rheovibron generally showed two glass transitions (T'$_{g}$s), -43$^{\circ}C$ and -4$^{\circ}C$ for NBR and EPDM, respectively. The tan $\delta$ peak monotonically shifted toward the higher temperature with increasing NBR content. It was also found that the optimum cure time was significantly decreased with loading of NBR.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.86-93
• /
• 2001

For solving the environmental problem of the waste EPDM and for new TPE blend materials, we developed a new kind of TPE material using a co-rotating twin screw extruder. To improve the mechanical properties of TPE material such as tensile strength, elongation at break, and modulus of the blend, PP and waste EPDM powder were blended with different screw configurations. The mechanical properties of the blends and morphology of the TPE were investigated. As the number of kneading disc and left-handed screw element increased, dynamic vulcanization of the material was increased because the shear stress and residence time of blends increased.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.366-373
• /
• 2000

In this study, the PPS/ABS blend system was investigated in order to collectively identify the relationship among blend morphology, chemical compatibilization and thermal property. ABS resin was chemically modified by the incorporation of maleic anhydride through reactive extrusion for enhanced compatibilization, and PPS, ABS and the modified ABS were blend by a sing twin screw extruder. The effect of chemical modification of ABS on the morphological, mechanical, and thermal properities of the resulting blend was examined. A strong interaction was observed between PPS and MABS by optical microsopy as well as scanning electron microscopy, exhibiting a well-dispersed morphological feature. The PPS/MABS blend showing a single glass transition temperature was observed in dynamic mechanical analysis, demonstrating a pseudo-homogeneous phase morphology induced by chemical compatibilization. PPS/MABS blend also exhibited an enhanced thermal stability and heat distortion temperature compared with modified PPS/ABS blend.