• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.12
• /
• pp.683-689
• /
• 2000

Two-dimensional(2-D) fiber-optic code-division multiple-access(FO-CDMA) system utilizes the optical orthogonal signature pattern code(OOSPC) to encode and decode 2-D data. Encoded 2-D data are spatially multiplexed and transmitted through an image fiber and receiver recovers the intended data by means of thresholding process. OOSPC's construction methods based on expansion of the optical orthogonal code, which is used in one-dimensional(1-D) FO-CDMA system, are introduced. Each OOSPC's performances are compared by using the bit error rate(BER) of interfering OOSPC's of other users. From the results we verify that a balanced incomplete block design(BIBD) construction has the best performance among other mehtods. We also propose a decomposed bit-plane method for parallel transmission and recovery of 256 gray-scale images using OOSPC's constructed by the BIBD method. The simulation result encourages the feasibility of parallel transmission and recovery of multiuser's images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1327-1332
• /
• 2015

In this paper, we studied several aspects that affect the quality of VoIP using WiFi network. It's clear that the background data traffic within an AP, the end-to-end delay and the traffic loss of TCP/IP network gives serious effects on the voice quality. A kind of access control for the VoIP connection within an AP should be done for the acceptable voice quality.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.24-30
• /
• 2009

In this paper, the FPGA modem platform complying with 3GPP Release 7 eHSPA specifications and its regularized verification flow are proposed. The FFGA platform consists of modem board supporting physical layer requirements, MCU and DSP core embedded control board to drive the modem board, and peripheral boards for RF interfacing and various equipment interfaces. On the other hand, the proposed verification flow has been regularized into three categories according to the correlation degrees of hardware-software inter-operation, such as simple function test, scenario test call processing and system-level performance test. When it comes to real implementations, the emulation verification strategy for low power mobile SoC is also introduced.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.5
• /
• pp.474-482
• /
• 2002

One dimensional Radiometric scanning system was fabricated and tested as a filmless radiographic inspection system, which could be applied to the evaluation of the corrosion and deposits in the pipeline. This system is composed of the single radioactive source of the collimated focusing beam, and single scintillation detector of BGO, and the mechanical scanning system to transport and align the source and detector, and the operating software to automatically control the mechanical scan system. The performance of the system was simulated using GEANT4 software. This system is applied to one specimen having an artificial falw(flat bottom hole) in the pipe and the other specimen with thickness variation. For the inspection by using the radioactive source in the pipeline, it is possible to evaluate the corrosion and deposits in real time and without film.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.941-950
• /
• 2001

In this paper, we present the integrated network architecture for supporting mobile IP in third generation mobile communication networks, and propose the end-to-end QoS control mechanisms of DiffServ and QoS control functions of each network element in the proposed network. First, the QoS supporting schemes of IMT-2000 are described. Second, the necessities of integrating the networks are discussed and the integrated architecture are proposed. Third, the mapping between wireless channels and DiffServ classes are presented. Finally, the end-to-end QoS control mechanisms are proposed. We also analyze the link level protocols with QoS provisioning for mobile multimedia assuming that the system support voice and data traffic simultaneously. In case of data traffic, the delay and throughput of SREJ ARQ and Type-1 Hybrid ARQ scheme are compared, and In case of voice traffic, the packet loss rate of BCH coding is analyzed according to the varying data traffic loads. The results indicate that the adaptive link level protocols are efficient to meet the QoS requirements while the complexities are increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2006-2013
• /
• 2015

In this paper we propose a multi-protocol gateway system based on low power wireless communications. The proposed multi-protocol gateway system was designed to allow real-time monitoring and control of the on-site situation through wired and wireless networks by gathering information for streetlight power control and environmental monitoring. The sensing data using multi-sensors with composite processing that selectively used wired or wireless communication (e.g., CDMA, Ethernet (TCP/IP), GPS, etc.) were designed to act as intermediaries that transmitted to the main server through ZigBee. Inaddition, they were designed by separating a CPU board and baseboard to ensure low maintenance cost and ease of hardware replacement. The proposed multi-protocol gateway system's power, impact, continuous operation stability, and immunity test results obtained a normal operation success rate of over 95% and normal continuous operation results. Moreover, in the voltage drop test, instantaneous immunity test, and conductive RF electromagnetic field immunity test, it obtained an average rating result of "A".

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1304-1314
• /
• 1993

During the last several years, the demand of mobile communication is increasing rapidly due to the convenience of usage. Therefore, the evoluation scenario toward the new cellular network is needed. In this paper, the future prospect of cellular network is considered, and movable-boundary TDMA/BTMA protocol is proposed as a new voice/data integrated multiple access protocol for the future cellular packet radio networks. Then, the performance of movable-bounary TDMA/BTMA protocol is analyzed and compared with that of PRMA protocol by computer simulation. In the proposed movable-boundary TDMA/BTMA protocol, the voice traffic sensitive to delay time is served by TDMA protocol and the data traffic sensitive to loss is served by BTMA protocol. Also, the boundary of voice and data can be moved adaptively by usign SYN character, control byte, voice call counter, ect. Therefore. it could be seen that the performance of movable-boundary TDMA/BTMA protocol is better than that of PRMA protocol with respect to delay and throughput.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.923-930
• /
• 2009

In this paper, we introduce a satellite conceptual design software which can be used for outlining a new satellite as well as for educational purpose. This software consists of three commercial tools: MATLAB, STK(Satellite Tool Kit), and Excel. The management of the design software is done by MATLAB which provides basic calculations, GUI(Graphical User Interface), Excel data base management, and STK control. STK, an orbital simulation software developed by AGI, takes a part of obtaining accurate orbital information of a satellite. Excel, a product of Microsoft, is used for the data base of previous satellites and for the saving place of temporary and final results of the software. The conceptual design of a satellite is to roughly estimate power system and mass. In the power system design, the sizes of solar array and battery are determined. Based on the database of existing satellites, we can estimate the subsystems's mass fraction of a target satellite. Design examples for Kompsat 1 and 2 are suggested for verification of the developed software.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.43-49
• /
• 2000

That modem society is an information society, information society has placed a high value on information and knowledge. Therefore, modem civilization depends largely on information and knowlege so the most valuable sources of all intelligence activities. This paper was studied on the new developmental direction for intelligent network service. The results of this study is as follow: first, intelligent network service must be systematic development. Second, intelligent network service must be promoted, presenting the development and establishment direction in future society. Third, intelligent network service must be able to unify ail the networks. Fourth, intelligent network service must be development for customers. Fifth, the cost of intelligent network service is determined by Telecommunication Reguration Commission. Sixth, the number system of intelligent network service must be accomplished by number system for future

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.457-465
• /
• 2014

This paper introduces a test bed for communication protocol schemes of underwater acoustic sensor network, and also shows experimental results obtained from the test bed. As a testing protocol, carrier sense multiple access/collision avoidance (CSMA/CA) is evaluated on underwater acoustic channel. A sensor node is equipped with a DSP control board of ATmega2560 and a commercial underwater modem produced by Benthos. The control board not only manipulates a GPS signal to acquire the information of location and time, but also controls the underwater modem to operate according to the procedure designed for a given testing protocol. Whenever any event takes place such as exchanging control/data packets between underwater modems and acquiring location and timing information, each sensor node reports them through radio frequency (RF) air interface to a central station located on the ground. The four kinds of packets for CSMA/CA, RTS(Request To Send), CTS(Clear to Send), DATA, ACK(Acknowledgement) are designed according to the underwater communication environment and are analyzed through the lake experiment from the point of feasibility of CSMA/CA in underwater acoustic communications.