• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.6
• /
• pp.748-753
• /
• 2012

In this paper, Face recognition algorithm is designed based on optimized pRBFNNs pattern classifier using three-dimensional scanner. Generally two-dimensional image-based face recognition system enables us to extract the facial features using gray-level of images. The environmental variation parameters such as natural sunlight, artificial light and face pose lead to the deterioration of the performance of the system. In this paper, the proposed face recognition algorithm is designed by using three-dimensional scanner to overcome the drawback of two-dimensional face recognition system. First face shape is scanned using three-dimensional scanner and then the pose of scanned face is converted to front image through pose compensation process. Secondly, data with face depth is extracted using point signature method. Finally, the recognition performance is confirmed by using the optimized pRBFNNs for solving high-dimensional pattern recognition problems.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.230-239
• /
• 2003

This paper presents face recognition algorithm using projection vector reflecting local feature for the area in contour lines. The outline shape of a face has many difficulties to distinguish people because human has similar face shape. For 3 dimensional(3D) face images include depth information, we can extract different face shapes from the nose tip using some depth values for a face image. In this thesis deals with 3D face image, because the extraction of contour lines from 2 dimensional face images is hard work. After finding nose tip, we extract two areas in the contour lilies from some depth values from 3D face image which is obtained by 3D laser scanner. And we propose a method of projection vector to localize the characteristics of image and reduce the number of index data in database. Euclidean distance is used to compare of similarity between two images. Proposed algorithm can be made recognition rate of 94.3% for face shapes using depth information.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.107-112
• /
• 1997

본 연구는 자유표면 인삭을 위한 실험 기법 개발에 관한 연구이다. 2차원 수중익에 의해 발생되는 자유표면파를 연구대상으로 삼았다. 실험은 회류수조에서 행하였다. NACA 0012 수중익을 여러가지 길이와 2가지양각에 대해서 실험한 결과 생기는 비선형 자유표면 파를 인식할 수 있도록 영상처리 기술을 도입하였다. 실헙결과 얻은 자유표면 형상을 다른 연구자의 결과와 비교하였다. 비교결과 영상처리의 기법이 자유표면을 인식하는데 대단히 유용한 도구임을 알 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.517-521
• /
• 2000

본 논문에서는 영상 처리 방법을 이용하여 주어진 객체의 실세계 좌표를 나타내는 특징점을 인식하는 한 방법을 제안한다. 제안된 방법에서는 육면체 형상의 객체를 대상으로 하며, 이러한 객체 영상의 주요한 특징점은 육면체를 결정짓는 꼭지점들로 이루어진다. 제안된 방법은 CCD 카메라로부터 영상을 획득하는 영상 획득 모듈, 획득된 영상에 대하여 관심 영역을 찾는 영상 분할 모듈, 분할된 관심 영역에 대하여 sobel operator등을 이용하여 경계 정보를 검출하는 영상 처리 모듈, 그리고 세선화, line fitting과정을 통하여 직선 벡터들을 검출한 후에 객체의 주요한 특징점을 인식하는 모듈로 구성된다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.355-358
• /
• 2003

대용량 데이터베이스를 기반으로 하는 지문인식 시스템에 있어서 전체적인 처리효율 증가를 위한 연구가 활발히 진행되고 있다 본 논문에서는 지문의 형상을 일정한 패턴을 기준으로 분류를 수행함에 있어서 영상의 Noise제거를 위해 하나의 영상에 크기가 서로 다른 2개의 블록으로 영상을 분할하여 공통적으로 추출해 내는 특이점의 Position과 개수에 따라 지문을 분류하여 대용량 지문인식 시스템의 처리 효율을 증가시키는데 있다 .

• Journal of Sasang Constitutional Medicine
• /
• v.11 no.1
• /
• pp.271-279
• /
• 1999

1. Purpose : From a viewpoint of Lee Je-ma, We consider the principle of shape(form) and image and try out a share of recognition about shape(form) and image in all its aspects. 2. Method : Especially we compared HeoJun's point of view with Lee Je-ma's point of view. 3. Result & Conclusion 1) The most important thing for an appearance of shape(form) and image is a differential Qi of sorrow- anger-joy-pleasure. 2) Lee Je-Ma chose a point of view from inside to outside in principle. 3) A method of materialism can be used when we give medical treatment. 4) Shape(form) and image is a method of constitutional diagnosis from a viewpoint of Lee Je-ma. 5) Shape(form) and image has a formal(typical) type, but the thing which is fixed do not exist, therefore partial shape(form) and image is possible. 6) We should observe a condition of mind, but objectivity and reappearance always remain.

• Journal of Korea Multimedia Society
• /
• v.7 no.3
• /
• pp.427-437
• /
• 2004

Shape comparison between 3D models is essential for shape recognition, retrieval, classification, etc. In this paper, we propose a method for comparing 3D shapes, which is invariant under translation, rotation and scaling of models and is robust to non-uniformly distributed and incomplete data sets. first, a modal model is constructed from input data using vibration modes and then shape similarity is evaluated with modal strain energy. The proposed method provides global-to-local ordering of shape deformation using vibration modes ordered by frequency Thus, we evaluated similarity in terms of global properties of shape without being affected localised shape features using ordered shape representation and modal strain one energy.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1966-1972
• /
• 2011

Optical flow estimation based on multi constraint approaches is frequently used for recognition of moving objects. This paper proposed the method to monitor passenger boarding using image processing when a train is operated based on Automatic Train Operation(ATO). The movement of passenger can be detected to compare two images, one is a basic image and another is immediately captured by CCTV. Optical Flow helps to find the movement of passenger when two images are compared. The movement of passenger is one of important informations for ATO system because it needs to decide door status.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.642-648
• /
• 2016

As 3D solid modeling prevails, a range of applications have become possible and intensive research on the integration of CAD/CAM has been conducted. As a consequence, methods to recognize the machining features from CAD models have been developed. On the other hand, generating a machining sequence using the machining features is still a problem due to a combinatorial problem with a large number of machining features. This paper proposes a new method that utilizes the precedence constraints through which the number of the combinations is reduced drastically. This method can automatically generate machining sequences requiring the lowest amount of machining time. An airplane part was used to test the usefulness of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1170-1175
• /
• 2014

The purpose of this study is to improve the interoperability of IFC for the basic data such as the size of member section, length, thickness, reference location, and eccentricity of the structural members. For this, the method to represent the basic data of structural member is proposed. In the proposed method, the most important criteria is the way that engineers recognize and treat the basic data of structural members. Then, in this study, an IFC file is generated based on the proposed method for a simple RC building composed of members and it is examined that the correct basic data can be derived from the IFC file in the way that engineers do in practice. From the results of the examination, the proposed method is expected to improve the interoperability of IFC for the basic data.