• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.600-605
• /
• 1998

체내방사능 측정시스템의 교정인자는 측정결과에 주요한 요인으로 작용한다. 교정인자는 특정 집단으로부터 표준체위와 표준장기를 도출, 이를 기초로 하여 제작한 펜텀으로부터 구하는 것이 일반적인 방법이다. 그러나 팬텀의 기하학적 구조 및 내부장기의 형상은 특정 집단에 따라 다르므로 이로 인한 측정오차가 발생할 수 있다. 따라서 본 연구에서는 북아메리카 성인남성의 표준자료에 근거하여 제작된 LLNL 팬텀과 일본성인 남성의 표준자료에 근거하여 제작된 JAERI 팬텀을 한국원자럭연구소 폐 카운터를 이용하여 상호비교.분석하였다. 이와 함께 LLNL 팬텀으로 교정된 폐 카운터의 성능시험을 JAERI 팬텀으로 DOELAP 성능시험범주 I, II, III 및 IV에 대해 수행하여 편텀의 구조 및 형상으로부터 발생하는 측정오차를 분석하였다. 비교.분석결과 1.7 cm ~ 3.7 cm 근육등가 가슴벽두께 범위내에서 JAERI 팬텀에 의한 교정인자가 전반적으로 LLNL 팬텀의 것보다 다소 높은 수치를 보였으나 허용수준이었고, 성능시험결과 상대편중은 DOELAP 성능 용인 기준을 만족하였다. 결국 두 팬텀간의 측정오차는 측정 및 체내피폭선량 평가시 수반되는 오차와 비교해 보면 그다지 크지 않은 것으로 결론지울 수 있다. 따라서 LLNL 펜텀으로부터 구한 교정인자를 국내 성인남성의 일상 모니터링에 사용할 경우 측정결과가 다소 과대평가되기는 하나 허용수준으로서 큰 문제가 없는 것으로 나타났다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.170.2-170.2
• /
• 2012

위성의 열진공 환경 시험은 고진공 극저온의 우주 환경을 모사하여 열제어 기능 및 임무 수행 능력을 검증하는 시험이다. 이 시험에서는 위성 주위에 부착한 방열판으로 위성 외각 온도를 변화 시켜 위성의 태양 지향 자세 또는 심우주 지향 자세를 모사하며, 이에 따른 위성의 온도 변화에 따라 지상 시험 장비로 위성의 히터 설정, 유닛 전원 형상의 변경 등을 해야한다. 또한 극고온 또는 극저온의 환경에 장시간 연속적으로 노출된 상태에서 위성의 기본적인 기능부터 영상 미션까지 검토하는 CPT 시험을 수행하며, 이 CPT 시험은 극한의 위성 상태의 시험이기 때문에 온도를 고려한 전자 시험 설계 및 24시간 위성 모니터링 시스템, 위험상황 발생 시 대처 방안 등에 대한 준비가 필요하다. 본 논문에서는 열진공 시험 시의 전자시험의 형상과 설계에 대해서 설명하고, 시험 결과에 대해서 정리하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1074-1076
• /
• 2005

Magnetic Inductance Tomography System은 비투자율이 공기보다 큰 대상물체를 외부에서 자기장을 인가하여 자기장의 변화를 자기센서로 측정하여 대상물체의 형상, 위치, 비투자율을 측정하고 판단하는 시스템이다. Magnetic Inductance Tomog-raphy System은 비투자율이 공기보다 큰 대상물체를 외부에서 자기장을 인가하여 자기장의 변화를 자기센서로 측정하여 대상물체의 형상, 위치, 비투자율을 측정하고 판단하는 시스템이다. Magnetic Inductance To-mography System은 대상물체의 위치, 모양, 크기에 따라 자기장의 변화가 달라게 된다. 대상물체를 실시간으로 측정하기 위하여 Magnetic Inductance To-mography System을 자기장 발생부와 신호변환부, 모니터링 부로 구분하여 구축하였다. 또한 대상물체를 위치를 이동시키거나 크기를 변경하여 대상물체의 신호를 해석, 측정하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1089-1094
• /
• 2021

In order to support the restoration and construction work of port infrastructure facilities damaged or damaged due to disasters and disasters, it is linked with work equipment based on the performance of duties such as regular patrol in the port, monitoring the underwater environment, and acquisition of underwater configuration information in the port, Define content related to AUV platform analysis and design that can support construction.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.31-39
• /
• 2017

Research in the machine tool industry has focused on ICT-based smart machines rather than hardware technologies related to machine tools. Real-time tool-status monitoring is representative of this type of technology and has become important for measuring sensors during cutting processes. In this paper, we studied several research areas and used a round bar to conduct fundamental research into the axial displacement of the main spindle of a tool when it was subjected to a machining load. We were able to use the gap sensor to detect the axial displacement indirectly by using grooves with various shapes on the round bar and sensing the gaps between the grooves. We then determined the optimal groove shape for monitoring the tool state.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.333-333
• /
• 2017

Recently, long-lasting landscape of the Naesung Stream has been changed due to encroachment of vegetation. To analyze patterns and causes of these changes, Korea Institute of Civil Engineering and Building Technology (KICT) has been carried out long-term monitoring research for the 56.8 km long study reach of the Naeseong Stream. Using the consecutive airborne LiDAR survey data obtained from 2012~2016, changes of channel bed forms such as bars could be detected. For the last four years of monitoring, mid-channel bars has been formed along the straight reaches and the existing bars showed vertical accretion caused by deposition on the vegetated surfaces.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.30-37
• /
• 1996

On-line process control equipment for CO$_{2}$ laser cutting is not available for industrial applications. The major part of the industrial laser cutting machines are adjusted off-line by highly educated engineers. The quality inspection of the sample is visual and referred to different quality scales. Due to the lack of automation the potential laser users hesitate to implement the cutting method. The first step toward an automation of the process is the development of a process monitoring system and the research is cincentrated on the area of on-line quality monitoring during CO$_{2}$ laser cutting. The method is based on the detection of the emitted light from the cutting front by photo diode. The developed monitoring system consists of the OP Amplifier, A/D convertor, power supply and PC. The signal from the photo diode has been undertaken from Fourier analysis and statistical analysis with real time. The photograph of striation pattern was taken by metallurgical microscope. As a result, it is possible to predict the striation pattern according to the beam traveling speed.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.626-637
• /
• 2021

The tomb complex of the royal family from the period of the Ungjin Baekje Kingdom (475 to 538 AD) in Gongju, Korea, contains the tomb of King Muryeong and other royal tombs. After the excavation of the tomb of King Muryeong in 1971, these tombs were opened up to the public, without the establishment of systems for their safety, conservation and management. The tombs have consequently experienced rapid environmental changes and suffered various damages. In this study, specific vulnerable parts inside the tombs were selected for deviation analysis using 3D scanning, and 3D image models were constructed on this basis. Progressive displacement was identified in tomb No. 5, and basic data for future investigations was acquired from tomb No. 6 and the tomb of King Muryeong. In the deviation analysis for the southern plastered wall of tomb No. 5, the damage was not found to exceed the ranges of ±18 mm and ±2 mm. However, the lintel stone was found to be sagging by 0.32 mm on average, and the distance between the walls to have increased by 0.36 mm on average. Direct water seepage occurring in tomb No. 5 is considered to be increasing the damage within the tomb, such as the dropping and sagging of the lintel. The 3D image models constructed in this study will play an important role as baseline data for future research, and can be used to discuss a secure conservation scheme for the tombs through cross-validation with precise measurement monitoring.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.4
• /
• pp.263-269
• /
• 2013

In this study, the strain based monitoring method to evaluate the lateral structural response of buildings is presented and an applicability of the proposed method is confirmed through the numerical study. It is assumed that the fiber Bragg grating(FBG) strain sensor is employed to measure the strain response of members due to the excellent properties such as multiplexing, and higher sampling frequency. These properties of FBG sensors is proper for buildings the a lot of sensors are required to monitor the reponses of those. FBG sensors measure the strain response of vertical members and are employed to calculate the curvatures of members using the measured strain responses. Then the lateral displacement, and lateral acceleration is evaluated based on the curvatures of vertical members. Additionally, these dynamic responses of buildings are used to evaluate the dynamic properties of buildings such as the natural frequencies and mode shapes using the frequency domain decomposition(FDD) method. Through the application of nine-story steel moment frame example structure, it is confirmed that the proposed method is appropriate to evaluate the lateral structural responses and dynamic properties of buildings.

• KIEAE Journal
• /
• v.4 no.1
• /
• pp.11-20
• /
• 2004

Innovative daylighting systems in buildings in various climatic zones around the world have been developed under the IEA SHC Task21. The performance assessment were obtained by monitoring the most systems using full-scale test model rooms or actual buildings under real sky conditions. This study aims to analyze the configuration and monitoring system of the nine Mock-up models of the IEA SHC Task21 comparatively. For the purpose, the geometry of the test rooms (length, width, height, window area, glazed area and occupied), reflectance of walls, floor and ceiling, transmittance of glazing (transmittance for hemispherical irradiation, normal irradiation and U-value) were compared. And equipment for measurement (manufacturer, range, calibration, maximum calibration error, cosine response error, fatigue error), and data acquisition system (manufacturer, type, number of differential analogue input channels, A/D converter resolution in bits, data acquisition software) were also analyzed comparatively. Some findings of these experimental methodology of standard monitoring have been proven to be a valuable one for future assessment of advanced daylighting systems in our country.