• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.151-152
• /
• 2010

극성 [0001] 방향으로 성장 된 질화물 기반의 LEDs (light emitting diodes) 는 분극현상에 의해 발생하는 강한 내부 전기장의 영향을 받게 된다. 이러한 내부 전기장은 양자우물 내의 전자와 정공의 공간적 분리를 야기하고 quantum confined Stark effect (QCSE) 에 의한 발광 파장의 적색 편이가 발생하며 양자효율의 저하를 가져오게 된다. 이러한 문제를 해결하기 위해 양자 우물구조를 GaN 의 m-plane (100) 이나 a-plane (110) 등 비극성면 위에 성장하려는 시도를 하고 있다. 그러나 비극성면의 비등방성 (anisotropy) 으로 인하여 결정성이 높은 비극성 GaN을 성장하는 데에는 많은 어려움이 있다. 비극성 a-plane GaN 의 결정성과 표면 거칠기의 향상을 위해 경사각을 가지는 r-plane 사파이어를 기판으로 이용하는 연구들이 많이 진행되어 있다 [1-4]. 그러나 r-plane 사파이어 기판의 경사각과 표면의 pit 형성에 관한 상관관계의 체계적인 연구는 상대적으로 많이 진행되지 않았다. 본 연구에서는 경사각을 가진 r-plane 사파이어 기판에 유기금속화학증착법을 (MOCVD) 이용하여 a-plane GaN 을 성장하였으며, 성장 시 기판의 경사각이 a-plane GaN의 성장 거동 및 표면형상에 미치는 영향을 분석하였다. 본 실험에서는r-plane에서 m-axis방향으로 0도에서 -0.65도의 경사각을 가지는 r-plane 사파이어 기판을 이용하였다. a-plane GaN 성장에는 고온 GaN 핵 형성층을 (nucleation layer) 이용하는 2단계 성장 법이 사용되었다 [5]. -0.37도 보다 크기가 큰 경사각을 가진 r-plane 사파이어에 성장된 a-plane GaN의 표면에는 수 ${\mu}m$ 크기의 삼각형 형태의 pit이 형성되었다. 사파이어의 경사각이 -0.37도에서 -0.65도로 증가하였을 경우에, GaN의 m방향 X-ray 록킹커브 반치폭은1763 arcsec에서 1515 arcsec로 감소하였으나 표면에 삼각형 pit의 밀도는 103 cm-2 이하에서 $2{\times}106$ cm-2으로 증가하였다. 이러한 r -plane 사파이어 기판의 경사각의 차이로 표면에 pit이 발생과 결정성변화의 원인을 확인하기 위해서, 여러가지 다른 경사각을 가진 사파이어 기판의 표면에 성장된 핵 형성층의 표면 양상을 확인하였다. 발표에서는 경사각의 차이에 따른 기판 표면에서의 원자 step 구조와 GaN 의 핵 형성 간의 상관관계에 대하여 구체적으로 논의할 것이다.

• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.279-288
• /
• 2001

Jointed rock mass can be analyzed by either continuum model or discontinuum model. Finite element method or finite difference method is mainly used for continuum modelling. Although discontinuum model is very attractive in analyzing the behavior of each block in jointed blocky rock masses, it has shortcomings such that it is difficult to investigate each joint exactly with the present technology and the amount of calculation in computer becomes trio excessive. Moreover, in case of the jointed blocky rock mass which has more than 2 dominant joint sets, it is impossible to model the behavior of each block. Therefore, a model such as ubiquitous joint model theory which assumes the rock mass as a continuum, is required. In the case of tunnels, unlike slopes, it is not easy to obtain safety factor by utilizing analysis method based on limit equilibrium method because it is difficult to assume the shape of failure surface in advance. For this reason, numerical analyses for tunnels have been limited to analyzing stability rather than in calculating the safety factor. In this study, the behavior of a tunnel excavated in jointed rock mass is analyzed numerically by using ubiquitous joint model which can incorporate 2 joint sets and a method to calculate safety factor of the tunnel numerically is presented. To this end, stress reduction technique is adopted.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.926-929
• /
• 2007

방수로는 홍수 피해 경감을 사용되는 구조적 대책으로 최근 국내에서 널리 계획되고 있다. 이러한 방수로는 보통 횡월류위어 등으로 대표되는 유입부 구조물을 통하여 하천 본류와 연결되지만, 평상시에도 본류의 유량을 일부 분담하는 형태로 설계되는 젖은 하도(wet channel) 형태의 방수로는 별도의 유입부 구조물을 설치하지 않고 바로 본류에 연결되는 것이 일반적이다. 유입부 구조물을 통해 연결되는 방수로의 특성은 유입부 구조물의 수리학적인 특성에 의해서 많이 좌우된다. 이에 반해 젖은 하도 형태로 본류에서 바로 분기되는 방수로는 그 특성이 방수로의 폭(W), 방수로 분류각$(\theta)$등에 의해서 많이 좌우되며, 만약 설계된 방수로의 횡단면 형상이 사다리꼴 또는 직사각형 단면을 따른다면 이러한 흐름은 "제한 영마루고 횡월류위어 흐름(restricted zero-height side weir flow)"으로 분류할 수 있다. 이러한 조건에서의 흐름은 일반적인 횡월류위어 흐름과 많이 다른 것으로 알려져 있다. 본 연구에서는 이러한 방수로 폭 및 분류각을 변화시켜 방수로 분류 조건을 다양하게 구현하여 실험을 수행하였으며, 특히 분류각 변화에 따른 유량계수의 변화를 분석, 검토하였다. 또한 측정된 방류량을 기준으로 산정된 유량계수를 기존 연구자들이 제시한 영마루고(zero-height) 횡월류위어 유량계수 산정식에 의해 산정된 결과와 비교하여 분석하였다. 분석결과 분류각이 90도인 경우 본류 프루드수의 증가에 따라 유량계수가 점차 감소하였으나, 분류각이 90도 보다 작은 경우에는 본류 프루드수가 증가함에 따라 유량계수가 점차 증가하는 것으로 나타났다. 이러한 한계를 만족시킬 입체 영상) 입체영상은 영화에서 시작되었으나, 20c후반기에 들어서면서 애니메이션 분야와 모바일, 광고 패널, 텔레비전등의 매체를 이용한 입체 영상의 개발로 인하여 특정 분야에 한정 시킬 수 없으므로 영상으로 칭한다. 입체 영상은 21c에 들어서면서 영상매체의 한 분야로 급부상하고 있다. 1900년 무렵부터 연구된 입체영화(3-Dimensional motion Picture)는 In여 년이 지난 지금 대중화를 눈앞에 두고 있다. 국내에서는 놀이 동산이나 박물관등에서 흔히 볼 수 있다. 하지만 앞으로는 HDW등의 대중화로 화질의 발전을 이룬 텔레비전 분야 등에서 실용화 될 전망이다. 국제적인 흐름과 함께 국내에서도 입체 영화에 대한 연구가 활성화 되어 영상산업의 한 주류로서 대두되고 있다. 이러한 상황에서 입체영상에 대한 이해와 콘텐츠(Contents)의 개발은 기술적인 진보에 발맞추어 준비되어야 한다. 본 논문은 이러한 기술적인 계보에 발맞춘 영상 콘텐츠 개발에 박차를 가하고자 앞으로의 발전분야에 대한 기술적인 면과 기법적인 면을 제시하여 기술만 앞서고 내용은 수입하는 수입국이기 보다는 미리 준비하여 비전문가나 타국의 기술에 선점 당하지 않는 분야로 성장할 수 있는 진보적인 영상 인들의 관심과 지속적인 연구를 독려하고자 한다.시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.39-56
• /
• 2019

In this study, we analyzed the effect of the Eungam Loop Line of Seoul Subway Line 6 on the sale price of adjacent row and multi-family houses on the accessibility and structural characteristics of subway stations. This study empirically analyzed a total of 17,938 cases from 2006 to 2017 based on data on the sale price of row and multi-family houses. In summary, the results of this study using the Hedonic Price Model are as follows. First, this study confirms that the Eungam Loop Line characteristics have a positive effect on the sale price as it is adjacent to the subway station. It is noteworthy that the sale price of 100-200m segment has a positive effect, and the sale price of Bulgwang station, which has excellent mobility and connectivity with CBD, YBD and GBD, has a positive effect. Second, this study shows the locational characteristics such as distance to bus stop, distance to mart, and distance to school have influence on the sale price. Third, this study finds the land characteristics such as land area, land shape, land facing, and road width, have significant effects on the sale price. Fourth, this study discovers the sale price is also is also affected by building and floor characteristics such as the type of housing, building area, the number of households, building age, elevator, and floor level.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.345-352
• /
• 2020

To preserve and restore tidal flats and prevent safety accidents, it is necessary to construct tidal flat topographic information including the exact location and shape of tidal creeks. In the tidal flats where the field surveying is difficult to apply, airborne LiDAR surveying can provide accurate terrain data for a wide area. On the other hand, we can economically obtain relatively high-resolution data from UAV (Unmanned Aerial Vehicle) surveying. In this study, we proposed the methodology to generate high-resolution topographic information of tidal flats effectively by integrating airborne LiDAR and UAV point clouds. For the purpose, automatic ICP (Iterative Closest Points) registration between two different datasets was conducted and tidal creeks were extracted by applying CSF (Cloth Simulation Filtering) algorithm. Then, we integrated high-density UAV data for tidal creeks and airborne LiDAR data for flat grounds. DEM (Digital Elevation Model) and tidal flat area and depth were generated from the integrated data to construct high-resolution topographic information for large-scale tidal flat map creation. As a result, UAV data was registered without GCP (Ground Control Point), and integrated data including detailed topographic information of tidal creeks with a relatively small data size was generated.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.175-181
• /
• 2007

Design prototype is described from the stately aspect as a principle of formative art, and from the shapeable aspect of physical feature. The prototype can be a common denominator which is contained in one nation's culture, art and life, as the thing which corresponds to the daily industrial craft, architecture and art's production intention and activity with the thought and background of the culture. We have formed the design prototypes with time and space in the process which absorbs and integrates the new culture. Modern Korean design's prototype can be seen in the late Chosun. As the upper culture and sub-culture were combined, the active culture was developed. Nobody can deny that Chosun's culture and art becomes a basis of today's design and Korea's beauty. In creating the design prototype, the natural environmental factors such as topography and climate are the most important. Such natural environmental factor led the design recognition of art and craft art, as well as an architecture and indoor environment's form. Korea design produced the artisan sprite which is devoted to a moral duty and instinct as our nation's nature and emotion, and ensured the emotional process not the rational process. So, it created naturalism which accepted the material and shape. Our design prototype's path tracking as an energy of future society's new design identity, can be the important theme for our design development.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.91-102
• /
• 1999

It is known that the digital image enlargement technique which only uses spatially neighbored pixels information in a still image can increase the size of the image but the practical enhancement of resolution is small because the frequency bandwidth of the image is basically limited. To solve this problem, this paper proposes the digital image enlargement technique that improves the reconstruction of the edge components by selectively transposing the direction of the subwindows of pseudomedian filter according to the distribution of neighbored pixels to the interpolation point. The pseudomedian filter has the better performance in aspect of the reconstruction of edge information when the pixel values masked by two subwindows parallel to the interpolation point are very similar and the pixel values masked by another subwindow that is orthogonal to the above two subwindows are similar to each other. In this paper, the computer simulation for digital image enlargement was performed with consideration of these characteristics when selecting the subwindows of pseudomedina filter. Based on this simulation result, the performance of the proposed method was analysed and its effectiveness was assessed. According to the proposed method, visual artifacts that result from using the limited samples can be effectively suppressed, and most characteristics and shapes of the original image can be preserved as well.

• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.9-13
• /
• 2012

The present study has been carried out to diagnose the temperature safety of a boiler desuperheater which decreases abnormally higher temperature of superheated steam in a reheater of a power plant. The liquid water in the desuperheater stays in a closed space. It becomes heated by the high temperature superheated steam and boiling could occur. Boiling might increase internal pressure and it could destroy the desuperheater if the internal pressure exceeds the allowable pressure of the desuperheater. The present study modeled reasonably the desuperheater and four cases of heat transfer analysis are executed with the consideration of insulator and natural convective fluid flow of the inside cooling water. For the case excluded the natural convective fluid flow, the temperature exceeds the allowable temperature and pressure. On the other hand, for the real case included natural convective fluid flow and insulator, the active heat transfer from higher temperature region to lower temperature region occurs and it makes the temperature in the cooling water below the allowable temperature and pressure. From this fact, it could be thought that the desuperheater in the reheater is safe from destroy or back flow.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.6
• /
• pp.8-14
• /
• 2017

Gearboxes for power transmission of a rotorcraft transfer power generated by an engine to the fan and the pusher for up, down and forward flight. The gearboxes are divided into the main gearbox and the sub-gearbox. The main goal of the gearbox design is to design the weight as light as possible within a range that satisfies all given requirements (transmission power, mounting space, etc.). In particular, the initial conceptual design is very important to reduce the weight of the gearbox, since the weight can vary greatly depending on the system configuration, even if it has the same function. In this study, various conceptual designs of the gearbox according to the installation position of the engine were presented. Also, the element parts such as gears and bearings in each concept design were designed by sizing for their life, and the estimated weights of the conceptual system configuration were compared.

• Journal of the Korean Magnetics Society
• /
• v.24 no.2
• /
• pp.51-55
• /
• 2014

The $Fe_3O_4$ nanoparticle was synthesized by the hot-injection method while varying the injection time of the precursor solution. The crystal structure was determined to be cubic inverse spinel with space group of Fd-3m based on X-ray diffraction (XRD) measurements and the morphology of the prepared $Fe_3O_4$ nanoparticle was studied with a high-resolution transmission electron microscope (HR-TEM). When the precursor solution was injected for 0.5 min, the size of the $Fe_3O_4$ nanoparticle was 7.63 nm, while the size of the obtained particle was 21.27 nm with the injection time of 60 min. The magnetic properties of the prepared $Fe_3O_4$ nanoparticle were investigated by both vibrating sample magnetometer (VSM) and $^{57}Co$ M$\ddot{o}$ssbauer spectroscopy at various temperatures. From the hyperthermia measurement, we observed that the temperature of the $Fe_3O_4$ nanoparticle powder reached around $120^{\circ}C$ under 250 Oe at 50 kHz, when the injection time of the precursor solution was 60 min.