• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.59-65
• /
• 2012

In this paper, we proposed a method for automatic detection of a updating object from spatial data sets of different scale and updating cycle by using areal feature matching based on shape similarity. For this, we defined a updating object by analysing matching relationships between two different spatial data sets. Next, we firstly eliminated systematic errors in different scale by using affine transformation. Secondly, if any object is overlaid with several areal features of other data sets, we changed several areal features into a single areal feature. Finally, we detected the updating objects by applying areal feature matching based on shape similarity into the changed spatial data sets. After applying the proposed method into digital topographic map and a base map of Korean Address Information System in South Korea, we confirmed that F-measure is highly 0.958 in a statistical evaluation and that significant updating objects are detected from a visual evaluation.

• Journal of Korea Multimedia Society
• /
• v.14 no.6
• /
• pp.742-751
• /
• 2011

This paper presents a robust 3D model hashing dependent on key and parameter by using heat kernel signature (HKS), which is special shape feature descriptor, In the proposed hashing, we calculate HKS coefficients of local and global time scales from eigenvalue and eigenvector of Mesh Laplace operator and cluster pairs of HKS coefficients to 2D square cells and calculate feature coefficients by the distance weights of pairs of HKS coefficients on each cell. Then we generate the binary hash through binarizing the intermediate hash that is the combination of the feature coefficients and the random coefficients. In our experiment, we evaluated the robustness against geometrical and topological attacks and the uniqueness of key and model and also evaluated the model space by estimating the attack intensity that can authenticate 3D model. Experimental results verified that the proposed scheme has more the improved performance than the conventional hashing on the robustness, uniqueness, model space.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.2
• /
• pp.1-6
• /
• 2005

Ryu et al. proposed a multiple target DOA tracking algorithm using a linear sensor array. In Ryu's algorithm first, the signal subspace is estimated using sensor output and the angular innovations of targets are extracted from the estimated signal subspace. Next, the DOA's of targets are tracked using the angular innovations as the inputs of Kalman filters. Ryu's algorithm has good features that it has no data association problem and is efficient. However, Ryu's algorithm can't be a lied to an arbitrarily shaped array because it was proposed using linear sensor array. Actually, when the sensor array is used in the various application fields, sensors have a position error. Therefore, the sensor array can be an arbitrarily shaped array. In this paper, we propose a multiple target DOA tracking algorithm applicable to an arbitrarily shaped array, and it sustains the good features of Ryu's algorithm.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.1
• /
• pp.13-20
• /
• 2006

This study proposes a new concept of a tunnel central drainage system by using a drain board to make a breakthrough on difficulties in the installation of conventional drainage system and draw-down of its drain capacity especially in long tunnels. A fundamental study has been performed for evaluation of the drain capacity of the planar drainage system adopted in this study. In fact, the system proposed makes possible to omit the side, transverse as well as central drainage pipes required in the conventional system, even if its drain capacity and any guideline for design are not available to date. In this circumstance, it is carried out to investigate the correlation between drain capacities and, shapes and posit ions of the columns of the drain board in terms of a variety of water inflows through hydrological model tests. It is shown from the tests that a drain capacity is highly influenced by the shape and the distance between the columns of a drain board in flowing direction, and a round rectangular shape of the columns leads to the highest capacity of drainage. And also, the shorter distance between the columns in flowing direction, the higher drain capacity would be achieved.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.143-155
• /
• 2007

The earth pressure acting on a circular shaft wall is smaller than that acting on the wall in plane strain condition due to the three dimensional axi-symmetric arching effect. Accurate estimation of the earth pressure is required for the design of the shaft wall. In this study, the stress model considering the decrease of earth pressure due to the horizontal and vertical arching effect and the influence of shape ratio (shaft height/radius) is proposed. In addition, model test on the sandy soil is conducted and a comparison is made between the stress model and the test results. The comparison shows that the proposed stress model is in agreement with test results; decrease of shape ratio (increase of radius) leads to stress state equal to the plane strain condition and approximate stress distribution is found between stress model and model test results.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.61-68
• /
• 2009

This paper is concerned with the investigation of the structural behavior of waffle structure. Parametric variation on waffle floor thickness, main beam depth and column sizes are imposed to study the effects on mode shapes and natural frequencies of waffle structures. Comparisons between FEM models using shell and 3D-solid elements have also been made. The analysis result has shown that the mode frequencies increase with i) increase in main beam depth at level 2 and ii) decrease in waffle slab thickness at level 3. Both 3D and 2D model shown similar mode shapes. Besides, there is a consistent difference in mode frequencies between 3D and 2D model ranging from 25% to 36%.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.223-227
• /
• 1992

산업의 발전으로 정밀가공기술 및 측정기술 및 측정기술의 개발에 대한 요구가 급증하고 있으며, 특히 가공전 공작물의 장착정도, 팔레트 교환 위치정도와 가공후 가공정도 및 공작기계 자체의 정도 판별은 생산품의 정밀도와 직접 관계되는 중요한 요인이기 때문에 정확히 규명할 필요가 있다. 본 연구에서는 공작물의 장착오차와 기계오차가 존재하는 경우 Denavit-Hartenberg 접근법에 의하여 레퍼런스에 대한 공간상 linkage의 기하학적 표현을 Matrix Multiplication을 사용하여 Cutting Tool 과 Workpiece에 대한 공간상의 관계를 규명하였으며, 가공에 미치는 체적오차를 규명하고자 한다.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.291-300
• /
• 2000

암반은 여러 가지 지질학적 요인들에 의해 형성된 수많은 절리면들을 경계로 하는 다양한 크기와 형상의 암석블럭들이 맞물려 평행상태를 이루고 있는 불연속체이다. 불연속 암반의 거동은 암석블럭을 이루는 무결암의 역학적 특성뿐만 아니라 암석블럭의 경계를 이루는 절리면들의 공간적 분포특성과 역학적 특성에도 큰 영향을 받는다. 불연속 암반의 거동해석을 목적으로 개발되고 있는 최근의 수치해석 기법들도 대부분 절리면의 영향을 효과적으로 해석에 반영시킬 수 있는 방법을 찾는데 집중하고 있다.(중략)

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.16-21
• /
• 1999

본 연구에서는 컴퓨터 상에 제어기와 구동부 등으로 구성된 가상제조시스템(Virtual Manufacturing System)을 구축하고 시뮬레이션하는 방법론을 다룬다. 특히 설비들간의 이동시 발생할 수 있는 3차원 공간상의 충돌을 검출하는 이산사건 및 연속상태 혼합 시뮬레이션 방법론을 소개한다. 시뮬레이션 모델은 DEVS(discrete event system specification) 형식론(formalsim)에 기초한 형상기구학 정보를 갖는 이른바 GKDEVS(Geometrical Kinematic DEVS)을 이용하였고, 시뮬레이션 방법론은 DEVS의 추상화 시뮬레이션(abstract simulation)방법을 확장하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.887-889
• /
• 2003

사다리꼴-분할 방식은 로봇 경로 계획 알고리즘 중 완전 셀-분할 방식중의 하나로서 장애물과 떨어진 경로를 제공하므로 안정성을 제공하는 방식이다. 사다리꼴-분할 방식은 다각형 환경으로 이루어진 형상공간에서 정의되며 자유공간을 볼록 다각형으로 이루어진 셀(cell)로 나누어 로봇 운동을 계획하는데, 원과 같은 비다각형 장애물이 존재하는 경우에 대해서는 이 성질을 만족하는 분할 방법이 알려져 있지 않다. 본 논문에서는 기존의 다각형 환경에서 정의된 사다리꼴-분할 방식을 분할의 완전성을 잃지 않고 원의 호를 포함하는 환경으로 확장하는 알고리즘을 소개하고 구현한다.