• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2015

This study examined the relationship between the shape of the inside of the PRV and the cavitation of the water supply system of an apartment house. In this paper, nine types of PRV with different gaps and shapes were analyzed numerically using a 3D model embedded in the commercial code, ANSYS-CFX. The lowest pressure and the maximum velocity occurred at the narrow gap, which is located at the between the stem and the disk. When the gap size was increased, the vapor volume fraction was always greater than 0, but the vapor volume fraction of the type of expansion pipe approached 0. These results indicate that the cavitation of PRV can be reduced by a shape change to the type of expansion pipe.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.16-26
• /
• 2005

The aerodynamic design of a proprotor for the Smart UAV adopting tiltrotor aircraft concept is conducted in this study. Since proprotor of tiltrotor aircraft is operated at both rotary and fixed wing mode with single configuration rotor, the proprotor has to be designed to meet performance requirements for both flight modes. The aerodynamic design of proprotor is accomplished by combining three sources of data - the proprotor performance data, the aerodynamic data of vehicle, and the performance data of engine. The performance analysis code for proprotor is based on the combined momentum and blade element theory and validated by comparison with the TRAM data. In order to design configuration for a proprotor satisfying requirements for both rotary and fixed wing mode, various kind of performance maps are constructed for many performance and configuration parameters. From the analysis the twist angle of 38 degrees and the solidity of 0.118 are decided to be the optimal geometric parameters for both operating conditions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.459-469
• /
• 2011

There are various factors for determining object shape, such as size, slope and its direction, curvature, length, surface, angles between lines or planes, distribution of the model key points, and so on. Most of the object description and recognition methods are for the 2D space not for the 3D object space where the objects actually exist. In this study, 3D chain code operator, which is basically extension of 2D chain code, was proposed for object description and analysis in 3D space. Results show that the sequence of the 3D chain codes could be basis of a top-down approach for object recognition and modeling. In addition, the proposed method could be applicable to segment point cloud data such as LiDAR data.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.189-196
• /
• 2006

The ABS method which is modeling the shape-design helps designers concentrate upon the design intuitively, using the modeling method based on the geometrical characteristics, the property information (a point. a curve. slopes. etc.). For the multi-sided patches, the ABS Modeling attempts the modeling with the uniform domain like a right triangle and a regular square. The mentioned method can reduce the speed of modeling but it can cause the difference from a designer's intention in the process of interpolation between the attributes for object modeling. Therefore, in this paper. we propose ABS modeling based on the Chordlength domain method to minimize such differences. The Chordlength, one of the methods generating irregular domain. is the technique transforming the domain in accordance with the length and form of attributes which a shape consists of. The Chordlength domain method is performed using MEL.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.3 s.16
• /
• pp.54-59
• /
• 2002

A commercial CFD code is used to compute the 3-D viscous flow field within the inlet flow concentrator of the newly developed AHU (Air Handling Unit). To improve the performance of the AHU, the inlet air needs to be gradually accelerated to the fan's annular velocity without causing turbulence or flow separation. Three major geometric parameters were selected to specify the inlet shape of the AHU. The performance of the AHU could be measured by the inlet and outlet flow uniformity and the total pressure loss through the inlet flow concentrator. Several numerical calculations were carried out to determine the influence of the geometric parameters on the performance of the AHU. The best geometric values were decided to have efficient inlet shape with analyzing CFD calculation results.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.85-96
• /
• 2001

In this paper, part features are classified and then its coding system is constructed by the considered characteristics of features in assemble process. Analyzing the characteristics of features, code values about part features are determined. Assembly process is divided into five functions such as transporting, handing, approaching, alignment and joining, and then the detail parameters of each functions such as determined. Code values about assembly process are determined according to detail parameters. The detail parameters are kinds of available working method and assembly tools when each assembly function is going on. By the coding system, available assembly process can be grasped and perceived for the part that it is difficult to assemble.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.346-351
• /
• 1996

본 논문은 다품종 소량생산에서 발생하기 쉬운 제품들의 유사성을 근간으로, 제품들의 공통적인 특성을 관리하기 위한 Famiiy BOM 체제를 구현하여 이를 제품의 설계정보관리에 이용할 수 있는 시스템 개발에 관한 것이다. 이 Family BOM을 통해 기존의 개별 제품별 BOM이 가지는 한계를 극복하고 유사 제품을 군으로 묶어 이들의 공통된 특성을 제품의 설계시에 활용할 수 있다. Family BOM은 부품을 군으로 분류하고 이 부품들의 구성을 공통 부분과 선택 부분으로 모듈화하여 표현하는 방법이다. 이 Family BOM을 통해 기존의 제품별 BOM을 별도로 관리하는데 따른 BOM 개수의 증가, 관리 및 변경의 복잡, 데이터의 정확성 부족 등과 같은 문제점을 해결할 수 있다. 본 연구에서는 먼저 부품을 형상 및 공정, 기능의 유사성에 따라 군별로 분류하기 위하여 부품의 특성을 코드화하여 이 코드의 유사성 정도에 따라 분류하는 Classification & Coding system을 개발하였다. 이 기법을 이용하여 유사한 부품을 군별로 관리할 수 있고 이를 통해 기존부품정보를 신제품 개발에 적 용하여 설계에서부터 공정계획 수립까지 시간을 단축할 수 있으며 체계적으로 도면을 관리 및 분석 할 수 있다. 또한 제품군별 BOM관리를 위한 Family BOM을 구현하였고, 이에 따라 도면 중심의 설계정보관리시스템을 개발 하였다.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.448-453
• /
• 2001

A commercial CFD code is used to compute the 3-D viscous flow field within the inlet flow concentrator of the newly developed AHU(Air Handling Unit). To improve the performance of the AHU, the inlet air needs to be gradually accelerated to the fan's annular velocity without causing turbulence or flow separation. Three major geometric parameters were selected to specify the inlet shape of the AHU. Several numerical calculations are carried out to determine the influence of the geometric parameters on the performance of the AHU. The performance of the AHU could be measured by the inlet and outlet flow uniformity and the total pressure loss through the inlet flow concentrator. The optimized nondimensionalized velocity profile through the inlet flow concentrator were used for the design of the AHU with the various volume flow rates.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.116-123
• /
• 2000

This paper presents an NC code post-processor that adjusts feedrates to keep the variation of metal removal rate along the tool paths minimum. Metal removal rate is estimated by virtually machining the part, whose surface model is built from a series of NC codes defined in operation plan, with cutting-tool-assembly models, whose geometry are defined in a machining database. The NC code post-processor modifies the feedrates by the adjustment rules, which are based on the machining knowledge for effective machining. This paper illustrates a procedure fur grouping machining conditions and we also show how to determine an adjustment rule for a machining-condition group. An example part was machined and it shows that the variation of cutting force was dramatically reduced after applying the NC code post-processor. The NC code post-processor is expected to increase productivity while maintaining the quality of the machined part.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.642-645
• /
• 2014

본 논문은 EAL6 수준의 공통평가기준 인증을 위해 ADV(개발) 클래스에서 ADV_INT에 대해 기술하였다. 특히, 테스트용 스마트 운영체제 소스코드 분석을 통해 구현된 내부 구조가 잘 구조화되었는지, 지나치게 복잡하지 않았는지 입증하기 위해 시도를 하였다. 다양한 소스코드 분석 도구를 통해 사이클로매틱복잡도(CyC), 정보흐름복잡도(IFC), Weighted IFC, fan-in, fan-out 등의 정보를 추출하였고, 추출된 정보를 기반으로 적용하여 수행하였다. 구조화된 정보 분석을 위해 객체지향 분석 도구를 사용한 재구조화 기법을 적용하여 수행하였다. 객체간 결합도, 팬아웃 등의 정보 등을 추출하였다. 추출된 정보를 기반으로 SW의 복잡도 및 구조적 정보를 분석한 결과 응집도 분석에 한계, TOE의 형상관리 정보 등의 부재에 따른 추출된 정보 분석의 한계, 활용된 도구의 분석 정보의 재반영 부재 및 구조적 분석 등의 한계점이 드러났다.