• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.295-295
• /
• 2010

생체 식립형 임플란트의 경우 성공도는 매식체의 골유착 정도에 크게 영향을 받는다. 골유착 시 임플란트의 표면 형상과 하중, 골질의 양 등 많은 요인에 영향을 받게 되므로, 임플란트의 안정성을 주기적으로 점검해야할 필요가 있다. 따라서 임플란트 안정성을 공진 주파수 분석법을 이용하여 측정하기 위해 압전소자 제작과 트랜스듀서의 구조를 설계하였다. 유한요소 해석을 통하여 압전소자와 트랜스듀서의 두께와 크기 변화를 통해 측정 주파수 범위를 10kHz대역으로 맞추었으며, 해석 결과를 토대로 샘플제작과 평가를 실시하였다. 평가 결과 시뮬레이션 해석결과와 유사한 10kHz의 주파수 대역을 가지는 것을 볼 수 있었고, 식립된 나사의 고정도가 증가할수록 주파수가 점차 증가하는 결과를 얻을 수 있었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.49-53
• /
• 2011

Diamond-like carbon (DLC) films is a metastable form of amorphous carbon containing a significant fraction of Sp3 bond. DLC films have been characterized by a range of attractive mechanical, chemical, tribological, as well as optical and electrical properties. In this study DLC films were prepared by the RF magnetron sputter system on $SiO_2$ substrates using graphite target. The effects of the post annealing temperature on the Property variation of the DLC films were examined. The DLC films were annealed at temperatures ranging from 300 to $500^{\circ}C$ using rapid thermal process equipment in vacuum. The variation of electrical property and surface morphology as a function of annealing treatment was investigated by using a Hall Effect measurement and atomic force microscopy. Raman and X-ray photoelectron spectroscopy analyses revealed a structural change in the DLC films.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.195-201
• /
• 2012

According to many customers' requests, optical measurement module (OMM) applications using automatic measuring devices to measure the machined part rapidly on a machine tool have increased steeply. Touch trigger probes are being used for job setup and feature inspection as automatic measuring devices, and this makes quality checking and machining compensation possible. Therefore, in this study, the use of touch trigger probes for accurate measurement of the machined part has been studied and a macro program for a hole measuring cycle has been developed. This hole is the most common feature to be measured, but conventional methods are still not free from measuring error. In addition, the eccentricity change of the least square circle was simulated according to the roundness error in a hole measurement. To evaluate the reliability of this study, the developed hole-measuring program was executed to measure the hole plate on the machine and verify the roundness error in the eccentricity simulation result.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.221-221
• /
• 2010

본 실험에서는 축전결합형 고주파 플라즈마와 $BCl_3$와 He의 혼합가스를 이용하여 화합물 반도체인 GaAs와 AlGaAs의 건식식각에 대해 연구하였다. 공정변수로는 첫째, BCl3와 He의 혼합가스 비율을 0%에서 100%까지 변화시켰다. 둘째, 고주파 파워를 50 W에서 200W 까지 변화를 주었고, 셋째, 공정압력을 120 mTorr~300 mTorr 까지 변화시켰다. 식각 실험을 마친 시료는 표면 단차 측정기와, 주사전자현미경을 이용하여 식각률과 선택비, 표면거칠기, 표면형상에 대하여 분석을 진행하였다. 또한, 광학발광분석계 (OES)를 이용하여 건식식각 실험 중 혼합가스에 의해 발생하는 플라즈마의 발광특성에 대한 실시간 분석을 하였다. 결과에 따르면, 1) 혼합가스에서 He의 비율이 20%일 때 GaAs와 AlGaAs 시료의 식각율이 $0.7\;{\mu}m/min$ 와 $0.6\;{\mu}m/min$ 로 가장 높게 나타났다. 2) 감광제에 대한 시료의 선택비 또한 동일 조건에서 GaAs의 경우 1 : 12, AlGaAs의 경우 1:8로 가장 높게 나타났다. 3)고주파 파워의 변화에 따른 식각률의 경우 100 W에서 GaAs 의 경우 $0.6\;{\mu}m/min$, AlGaAs의 경우 $0.5\;{\mu}m/min$ 이었고, 고주파 파워가 증가할수록 식각률은 감소하였다. 4) 감광제에 대한 시료의 식각 선택비의 경우 50 W에서 GaAs 시료가 1:14, AlGaAs 시료가 1:10으로 가장 높은 선택비를 보였고 고주파 전원이 증가할수록 선형적으로 감소하였다. 5) 표면거칠기는 50~100 W 구간에서는 1.0~1.5 nm 으로 큰 증가폭이 없다가 150 W 이상에서는 3.0~5.0 nm 으로 증가하였다. 반응기의 압력이 120 mTorr에서 300 mTorr로 변화할 때 식각률과 선택비는 비교적 선형적으로 감소하였으며, 표면거칠기 또한 증가하였다. 결론적으로 $BCl_3/He$ 고주파 플라즈마에서 약 20%의 He을 포함하고 있을 때 가장 우수한 건식 식각 결과를 얻었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.174-174
• /
• 2016

하천은 침식작용과 퇴적작용에 의해 유사를 하류방향으로 이동시킨다. 하천의 침식작용은 하상을 변화시키고 교량, 보 등의 하천 구조물의 안전성을 저해하여 국민의 재산과 생명에 막대한 피해를 입힌다. 또한 퇴적작용은 상류로부터 이동한 유사를 하도 내에 퇴적시켜 하천의 형상을 변화시키고, 통수면적을 감소시켜 홍수기에 범람 빈도와 규모를 증가시킨다. 이처럼 부유사 자료는 하천 구조물의 설계, 수자원 개발 및 관리를 위한 하천계획의 전반에 있어 매우 중요한 자료이지만, 국내의 경우 유사량 측정방법에 대한 연구가 미비하여 대부분 유사량 채집기를 활용한 직접 측정이 이루어지고 있다. 하지만 유사량 채집기를 활용한 관측은 매우 제한된 지역에서 간헐적으로 실시되고 있어 측정 자료가 부족한 실정이다. 이러한 한계를 극복하고자 간접적인 측정 방식을 개발하였으나 우리나라의 강우 특성상 홍수기를 거치면서 하천의 수리학적 특성이 변화하여 관계식의 신뢰도가 떨어지며 자주 갱신해야 한다는 어려움이 있다. 본 연구에서는 횡방향 유속과 신호대잡음비(Signal to Noise Ratio, SNR)를 측정하는 H-ADCP(SonTek, SL-3000)와 레이저 회절을 이용하여 지점의 입도분포와 부유사 농도를 측정하는 레이저부유사측정기(LISST : Laser In-Situ Scattering and Transmissometry)를 이용하여 자료를 취득하였다. 그리고 취득된 신호대잡음비, 부유사 농도간의 관계분석을 통해 회귀식을 구축한 후, 초음파 산란도로 정의되는 신호대잡음비를 활용하여 실내 실험수로의 부유사량을 산정하였고 실측 부유사량과의 비교를 통해 오차 분석을 실시하였다. 오차 분석 결과 실측 부유사량은 138.15g/s, 추정 부유사량은 165.372g/s로 신호대잡음비를 이용하여 추정한 부유사량이 약 19% 과다산정 하는 것으로 나타났다. 본 연구의 결과는 현재 우리나라에 다수 설치되어 있는 수평초음파도플러유속계(H-ADCP)를 활용한 지속적인 부유사량 관측의 토대를 마련할 것으로 사료된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.549-564
• /
• 2008

In this paper, the plastic settlement of mortar is analyzed on the basis of the small strain consolidation theory, and the validity of the approach is verified through the comparison with experimental data. First, the amount of settlement caused by self-weight of bulk mortar is measured using a non-contact laser measurement device and the estimation of material parameters related to the settlement of mortar is followed. In advance, another experiment is also performed on mortar with embedded reinforcement to measure the settlement distribution, and the influence of mixture proportions and cover depth on unequal settlement is analyzed. Finally, correlation studies between experimental data and settlement distribution obtained by consolidation analysis represents that the application of consolidation theory to the analysis of plastic settlement of mortar is reasonable.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2006

The Integrated Ballistics Identification Systems (IBIS) is widely used for bullet and casing signature identification. The IBIS obtains a pair of ballistic signatures from two bullets (or casings) using optical microscopy, and estimates a correlation score which can represent the degree of signature match. However, this method largely depends on lighting and surface conditions because optical image contrast is primarily a function of test surface's slope, shadowing, multiple reflections, optical properties, and illumination direction. Moreover, it can be affected with surface height variation. To overcome these problems and improve the identification system, we used well known surface topographic techniques, such as confocal microscopy and white-light scanning interferometry. The measuring instruments were calibrated by a NIST step height standard and verified by a NIST sinusoidal profile roughness standard and a commercial roughness standard. We also suggest a new analysis method for the ballistic identification. In this method, the maximum cross-correlation function CCFmax is used to quantify the degree of signature match. If the compared signatures were exactly the same, CCFmax would be $100\%$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.440-447
• /
• 2009

This study was performed to compare the wear resistance of sealant and flowable resins for analyzing the effect of flowable resin as a sealant in preventive resin restorations. Specimens were made and Vicker's hardness number and surface roughness were measured. SEM observations of the polished and abraded surfaces were established. Kruskal-Wallis rank test and Mann-Whitney U test at the significant level of ${\alpha}$=0.05 were used. The following results were obtained: 1. The microhardness was decreased among groups in following order: Z350 (3M ESPE, U.S.A), Estelite (Tokuyama Dental, Japan) and Ultraseal (Ultradent, U.S.A). There were significant differences in all groups (p<0.0001). 2. The surface roughness was decreased among groups in following order: Ultraseal XT plus, Palfique Estelite LV and Filtek Z350 flowable. However, there is no statistically significant differences in roughness among Estellite, Z350 and Ultraseal at the significance level of ${\alpha}$=0.05, with p=0.116 3. SEM observation of the unworn and worn surfaces revealed the qualitative differences in the wear appearance among groups. The results in this study indicate that flowable resin is better than sealant in aspect of physical properties.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.214-220
• /
• 2013

Hydrophobic coating on a silicate-based yellow phosphor ($Sr_2SiO_4:Eu^{2+}$) was carried out by using hexamethyldisiloxane (HMDSO) precursor in an atmospheric pressure dielectric barrier discharge plasma reactor, eventually to improve the long-term stability and reliability of the phosphor. The phosphor powder samples were characterized by a scanning electron microscope (SEM), a transmission electron microscope (TEM), a fluorescence spectrophotometer and a contact angle analyzer. After the coating was prepared, the contact angle of the phosphor powder increased to $133.0^{\circ}$ for water and to $140.5^{\circ}$ for glycerol, indicating that a hydrophobic layer was formed on its surface. The phosphor coated with HMDSO exhibited photoluminescence enhancement up to 7.8%. The SEM and TEM images of the phosphor powder revealed that the plasma coating led to a morphological change from grain-like structure to smooth surface with 31~46 nm thick hydrophobic layer. The light emitting diode (3528 1 chip LED) fabricated with the coated phosphor showed a substantial enhancement in the reliability under a special test condition at $85^{\circ}C$ and 85% relative humidity for 1,000 h (85/85 testing). The plasma-mediated method proposed in this work may be applicable to the formation of 3-dimensional coating layer on irregular-shaped phosphor powder, thereby improving the reliability.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.11-19
• /
• 2017

Since operation of railway trains is a major source of particle pollution in tunnel air, a particle removal device can be an effective measure to remove wear particles. To obtain design conditions of the particle removal device that will be installed underneath the railway trains, the wind speed and particle concentration underneath the trains were investigated using a three-dimensional ultrasonic anemometer and a DustTrak aerosol monitor, respectively. The measurements were made for the trains running on Seoul Metropolitan Subway Line 5 on February 10, 2015. The data were analyzed according to the track geometry (straight, curved) and train speed pattern (acceleration, cruising, and deceleration) between stations. Train speed was also analyzed. The average wind speed and $PM_{10}$ concentration underneath the trains were ~30% of the train speed and ${\sim}200{\mu}g/m^3$ for both straight and curved sections. Average $PM_{10}$ concentration for deceleration sections was higher than that for acceleration sections.