• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.50-62
• /
• 1994

This paper presents the results of a comparative analysis of the model test results to investigate the effect of bulbous bow installed on a large full form ship to the ship resistance performance. Seven parameters related to the shape of bulbous bow were selected and varied systematically to inquire their effects experimentally. A total number of twenty-three ship models with different bulbous bow were manufactured, and resistance tests. flow visualization test, and wave profile measurement were carried out for each model. For the comparative analysis between the various bulb forms and their model test results, bulbous bow forms are classified into nine groups according to their form characteristics. From the analysis of the trend of the resistance components, it was verified that form resistance has dominant effect on the total resistance of a slow full form ship. The model test and its statistical analysis showed that the direction of streamlines around bulbous bow has close relationship with resistance components. especially with form resistance

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.137-137
• /
• 2019

돌출줄눈은 산지하천의 만곡부의 빠른 유속을 감소시키기 위하여 활용된다. 본 연구에서는 친환경 디자인의 나무줄기 돌출줄눈(Tree Trunk Rip, TTR)과 사다리꼴 돌출줄눈(Trapezoid Rip, TR)의 흐름저항을 비교 분석하기 위하여 개수로 수리실험을 수행하였다. 실험은 길이 9m, 폭이 0.6m이며 경사가 0.0035로 고정된 개수로의 한쪽 측벽에 돌출줄눈을 설치하여 진행하였다. 사다리 꼴 돌출줄눈의 형상은 밑변 각이 $63^{\circ}$이며 무차원 설치간격 ${\lambda}_{nv}$가 6, 9, 12인 경우이다. 나무줄기 돌출줄눈의 기본 형상은 사다리꼴이고 표면은 나무껍질 무늬이며 ${\lambda}_{nv}$가 약 10이다. 나무줄기 돌출줄눈의 간격은 사다리꼴 돌출줄눈의 최적 설치 간격 9~12배 범위에 해당되고 평균 마찰계수는 사다리꼴 돌출줄눈의 9~12배의 평균 마찰계수 범위에 포함되었다. 사다리꼴 돌출줄눈의 ${\lambda}_{nv}$가 9, 12일 때의 전체 저항에 대한 형상저항의 비는 평균 $69.4{\pm}5.8%$였으며 나무줄기 돌출줄눈은 $70.2{\pm}2.1%$로 사다리꼴 돌출줄눈과 유사하다. 산지하천 흐름저항을 위한 돌출줄눈 설치에 있어 친환경적 디자인을 고려한 나무줄기가 사다리꼴 돌출줄눈보다 활용도가 클 것으로 기대된다.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.169-174
• /
• 2013

The effect of modifying the shape of a high-performance EMU train on the aerodynamic drag is studied here using Computational Fluid Dynamics(CFD) based on three dimensional Steady-state Navier-Stokes equation and two equation turbulence modeling. FLUENT 12 and Gambit 2.4.6 are employed for a numerical simulation of the aerodynamic drag of a streamlined-shape train as well as a proto type train. The characteristics of the aerodynamic drag of trains in tunnels are analyzed in a comparison with these characteristics in an open space. The contribution of the aerodynamic drag of each case is also investigated to establish principal pertaining to drag reduction for urban trains in tunnels. The aerodynamic drag of a streamlined train was reduced to 9.8% relative to a proto-type train with a blunt nose and a protruding roof facility and underbody shape: the running resistance is expected to be reduced by as much as 4% at a running speed of 80km/h.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.11-18
• /
• 2000

This paper is concerned with the generation of an optimal forward hull form by a nonlinear programming method. A Rankine source panel method based on the inviscid and potential flow approximation is employed to calculate the wave-making resistance and SQP method is also used for the optimization. The hull form is represented by a spline function. The forward hull form of a minimum wave resistance with the given design constraints is generated. In addition, the forward hull form of a minimum total resistance by considering the frictional resistance together with an empirical form factor is produced and compared with the former result.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.279-288
• /
• 2015

Using the Vehicle Modeling Function, which can model various 3D nose shapes, nose shape optimization is performed to reduce the aerodynamic drag of the KTX Sancheon. 2D characteristic shapes of the KTX Sancheon nose were extracted and a base model of the KTX Sancheon was constructed for design optimization using the Vehicle Modeling Function. The design space was constructed with the base model and does not violate the shape constraints of commercial trains. Through nose shape optimization with the Broyden-Fletcher-Goldfarb-Shanno algorithm, the aerodynamic drag of the optimized shape was reduced by 6% compared to that of the base model. The longer nose and sharper edge of the optimized shape weaken the vortices behind the last car and can reduce the aerodynamic drag.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2011

In this study, we investigated the hydrodynamic and thermal performance of constructal architectures on the basis of the mass flow rates for a given pressure drop, and we determined the thermal resistance and flow uniformity. The five flow configuration used in this study were the first construct with optimized hydraulic diameter, the second construct with optimized hydraulic diameter, the first construct with non-optimized hydraulic diameter, second construct with non-optimized hydraulic diameter, and a serpentine configuration. The results of our study suggest that the best fluid-flow structure is the second constructal structure with optimized constructal configurations. We also found that in the case of the optimized structure of cooling plates, the heat transfer was remarkably higher and the pumping power was significantly lower than those of traditional channels.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.181-192
• /
• 2001

이 논문은 샌드위치식 강-콘크리트 복합구조체에서 상하 강판과 격벽으로 구성되는 셀의 형상비가 거동과 성능에 미치는 영향을 다루었다. 이 구조체에서 셀 형상비는 하중전달 메카니즘과 하중분배능력을 변화시킨다. 따라서 셀 형상비에 따라 부재의 응력수준과 하중저항능력이 변화한다. 이 연구에서는 셀 형상비가 이 구조체의 거동과 성능에 미치는 영향을 규명하기 위해, 두 종류의 샌드위치식 복합구조체에 대해 다양한 셀 형상비를 설정하여 비선형 구조해석을 수행하였다. 해석결과로부터 셀 형상비에 따른 하중전달 메카니즘과 부채 응력에서의 차이점을 도출하였으며, 이들 차이점을 바탕으로 셀 형상비가 전단성능, 휨성능, 하중저항성능에 미치는 영향을 분석하였고, 파괴모드와 연성에 미치는 영향에 대해서도 간략히 언급하였다. 연구결과, 셀 형상비가 증가함에 따라 하부 강판과 콘크리트의 응력수준이 낮아지는 결과를 나타내었다. 이것은 각 부재의 유효휨강성과 유효전단강성 증가를 나타내며, 따라서 구조체의 하중저항성능도 향상되는 것으로 판단된다. 특히 셀 형상비의 증가에 따른 성능향상에서 전단성능이 휨성능에 비해 더 큰 효과를 나타내며, 이러한 차이는 파괴모드와 연성에도 영향을 미칠 것으로 판단된다. 즉, 셀 형상비가 증가함에 따라 구조물의 거동 및 파괴모드는 점차적으로 전단에서 휨으로 변화하고, 이에 따라 구조물의 연성도 점차적으로 향상될 것으로 판단된다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.101-120
• /
• 2023

Electrical resistivity survey have been widely conducted at diverse scales, from a few centimeters for laboratory tests to kilometers for field tests. It measures electrical resistance through relationship of electric potential difference and current between two electrodes penetrated on the surface of medium, and eventually quantifies electrical resistivity known as inherent properties of the medium. In field or full-scale test, it assumes the electrodes as equivalent half-sphere electrodes that have a same surface area with different electrodes for ease of calculation because the contact area between electrode and medium is small and sufficient distance between two electrodes. However, small-scale laboratory test is significantly affected by the electrode geometries (penetrated depth, height, radius of electrode and distance between electrodes), which change the equipotential surface and electric current flow. Indeed, the electrode geometries may eventually cause a difference of electrical resistivity value. This study reviews the theoretical electrical resistance derived with various electrode geometries (half-sphere, cylinder, cylindrical with half-spherical tip, cylindrical with conical tip) and verifies the developed numerical module by comparing results with the theoretical electrical resistance. The distributions of electrical resistance around electrodes and among electrodes are analyzed. In addition, it is discussed how the electrical characteristic of cylindrical electrode with conical tip widely used in field test has effect on the electric current flow.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1106-1111
• /
• 2014

This paper has a purpose to find out the characteristics of pressure distribution according to the POD shape installed in the Hydrofoil vessel, using the CFD. The results showed that as we cut the POD cross-section's basic shape along the x-axis from 0 to 8cm, the viscous resistance had decreased, but then the pressure resistance had increased modestly. However, the cutoff length of POD cross-section shape has close to 9cm, the viscous drag had increased and the pressure drag had decreased. As a result, we found out that the pressure resistance made more effects in POD shape than the viscous resistance, and the total resistance decreased near the 9cm of cutoff length.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.628-631
• /
• 2010

환경문제에 대한 관심으로 자동차에 대한 경량화가 요구되는 동시에 안전규제가 강화 되고 있어, 높은 인장강도를 가지는 고강도 강의 차체 적용 비율이 점차 증가하고 있다. 또한, 자동차 1대를 조립하기 위한 저항 점용접 횟수를 줄이고, 용접부에 충격안정성을 확보하기 위한 관심이 고조되고 있다. 따라서, 국내 자동차 산업에서 용접부의 신뢰성을 보장하기 다양한 비파괴 검사를 적용하고 있으며, 생산 공정에 적용하고 있다. 그중에서 용접 전극 사이에서 동저항(Dynamic resistance, 용접 공정중모재의 저항값의 변화)을 계측하여 용접성을 평가하는 방법이 제시되고, 차체 조립공정 중에 적용하려는 시도가 이루어지고 있다. 본 연구에서는 자동차 차체용 냉간 압연강판(590MPa dual-phase steel)을 인버터 DC 저항 점 용접하여, 용접전극 사이에서 동저항을 측정 하였다. 용접성은 인장전단 강도로 평가하였고, 용접 공정 변수는 용접 전류, 용접 시간, 가압력을 선정하였다. 동저항 그래프의 ${\alpha}$-peak와 ${\beta}$-peak값을 인장전단 강도에 따라 회귀 분석하여, 동저항에 따른 인장전단 강도를 예측하였다. 추가적으로, 용접부의 외관 형상 중에 압흔 깊이와 압흔자국 지름에 대한 회귀분석을 실시하였으며, 용접부 형상에 대한 신뢰성을 부여하였다.