• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1308-1314
• /
• 2018

$Er^{3+}$ and $Yb^{3+}$ co-doped $Y_3Ga_5O_{12}$ polycrystalline powders were prepared by using a solid-state reaction method, and their crystallinities were measured using X-ray diffraction. According to the results of X-ray diffraction, the powders showed a polycrystalline tetragonal structure. The photoluminescence and the upconversion luminescence properties of the $(Y_{0.85-x}Yb_{0.15})_3Ga_5O_{12}:Er^{3+}_x$ (x = 0.03, 0.06, 0.09, 0.12 and 0.15) phosphors were investigated in detail. Green and red upconversion emissions were observed for the phosphors excited by 980 nm radiation from a semiconductor laser. The powders exhibited strong green and weak red upconversion emission peaks at 553 and 660 nm, respectively. Also, their upconversion processes were explained using an energy-diagram analysis and the strongest upconversion intensity was emitted by the powder with a 0.12 mol $Er^{3+}$ ion concentration.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.317-324
• /
• 2007

Fluorescence measurements of dissolved organic matter(DOM) have the superior advantages over other analysis tools for applying to water quality management. A preliminary study was conducted to test the feasibility of applying synchronous fluorescence measurements for tracing and monitoring pollution sources in a small stream located in an upstream area of the Sooyoung watershed in Busan. The water quality of the small stream is affected by leachate from sawdust pile and discharge of untreated sewage. The sampling sites included an upstream site, two pipes discharging untreated sewage, leachate from sawdust, and a downstream site. Of the five field samples, the leachate was distinguished from the other samples by a high peak at a lower wavelength range and a blunt peak at 350nm, suggesting that synchronous fluorescence can be used as a discrimination tool for monitoring the pollution. The efficacy of various indices derived from the spectral features to discriminate the pollution source was tested for well-defined mixture of the sawdust leachate and the upstream stream by comparing (1)the difference between measured values and those predicted based on mass balance and the characteristics of the two samples and (2)the linear correlations between index values and mass ratios of the sample mixtures. Of various discrimination indices selected, fluorescence intensities at 276 nm$({\Delta}\lambda=30nm)$and 347 nm$({\Delta}\lambda=60nm)$ were suggested as promising potential discrimination indices for the sawdust pollution source. Despite the limited number of samples and the study area, this study illustrates the evaluation process that should be followed to develop rapid, low-cost discrimination indices to monitor pollution sources based on end member mixing analyses.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.173-178
• /
• 2022

A lateral flow immunoassay (LFIA) method using carbon nanodot@silica as a signaling material was developed for analyzing the concentration of retinol-binding protein 4 (RBP4), one of the lung cancer biomarkers. Instead of antibodies mainly used as bioreceptors in nitrocellulose membranes in LFIA for protein detection, aptamers that are more economical, easy to store for a long time, and have strong affinities toward specific target proteins were used. A 5' terminal of biotin-modified aptamer specific to RBP4 was first reacted with neutravidin followed by spraying the mixture on the membrane in order to immobilize the aptamer in a porous membrane by the strong binding affinity between biotin and neutravidin. Carbon nanodot@silica nanoparticles with blue fluorescent signal covalently conjugated to the RBP4 antibody, and RBP4 were injected in a lateral flow manner on to the surface bound aptamer to form a sandwich complex. Surfactant concentrations, ionic strength, and additional blocking reagents were added to the running buffer solution to optimize the fluorescent signal off from the sandwich complex which was correlated to the concentration of RBP4. A 10 mM Tris (pH 7.4) running buffer containing 150 mM NaCl and 0.05% Tween-20 with 0.6 M ethanolamine as a blocking agent showed the optimum assay condition for carbon nanodot@silica-based LFIA. The results indicate that an aptamer, more economical and easier to store for a long time can be used as an alternative immobilizing probe for antibody in a LFIA device which can be used as a point-of-care diagnosis kit for lung cancer diseases.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.183-190
• /
• 1994

To assess the effects of plant stress by light, temperature, NaCl and soil moisture on photosynthetic activity, the fluorescence method was used for Chinese cabbage(Brassica perkinensis Rupr.), strawberry(Fragaria grandiflora Ehrh.) and citrus tree(Citrus unshiu Marc.). With decreasing the light intensity, Fv/Fm ratios of intact leaves of Chinese cabbage and strawberry increased significantly, indicating lower photochemical efficiency in PS II system, resulting in an inverse relationship with the photosynthetic activity. Chinese cabbage and strawberry that were grown at higher temperature had higher Fv/Fm ratios and photosynthetic activities, while those given high concentration of NaCl and having low soil moisture had lower values. Chinese cabbage more resistant to salt stress and requiring more water had a greater Fv/Fm ratio than strawberry. In citrus tree, Fv/Fm ratio was lower in the non-irrigated group than the irrigated one. From these results, the fluorescence method was found to be a useful tool which can be used to assess the degree of in vivo stress induced by various environmental factors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.189-195
• /
• 2003

The objective of this study is to improve the optical sensitivity of laser fluorescence for detection of incipient enamel caries. An incipient carious lesion was formed in various stages by placing an enamel specimen of a bovine tooth in STPP demineralization solution. After measuring the optical density of the lesion surface by laser fluorescence induced by argon laser and various alter of yellow(500-520nm), amber(520-540nm), orange(540-560nm), and red(560-580nm), the specimen was cut vertically to measure the depth of the lesion using a polarizing microscope. SAS statistical program was used to analyze the relationship between the optical density of the lesion suface and the depth of the lesion. The results were as follows: 1. The optical density of early carious lesion, measured by laser fluorescence with amber and orange filter, and lesion depth observed by polarizing microscope, were increased as demineralization time increased. 2. The correlation coefficient between optical density of the lesion surface and the histological depth of the lesion was the highest in orange filter(r=0.49), followed by amber(r=0.32), yellow(r=0.13) and red(0.01). 3. Regression analysis showed that the most linear relationship between the optical density and the lesion depth was existed in orange filter group. In regard above results, laser fluorescence could be considered to be reliable for optical diagnosis of dental caries.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.422-431
• /
• 2009

The analytical results of wear metals such as Na, Mg, Al, Si, P, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Mo, Ag, Cd, Sn, Ba, Pb in oil samples are compared by portable and bench-top XRF methods as a basic study for the development of portable X-ray fluorescence spectrometer. The instrumental parameters such as measurement time of portable and bench-top XRF were optimized using certified reference materials of hydrocarbon oil with 20 wear metals in concentration range from 10 to 900 mg/kg. The analytical results of 20 wear metals in certified reference materials and new/used engine oil samples were compared by empirical and fundamental parameter methods.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.5
• /
• pp.193-200
• /
• 2016

Characteristics of $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphorescent phosphors synthesized by solid state reaction and polymerized complex method were comparatively analyzed. In order to evaluate thermal stability of $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphorescent phosphors at high temperature, phosphorescent properties of $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ were investigated with thermal treatment at $1250^{\circ}C$ under reducing atmosphere, which was the general heat treatment conditions for ceramic manufacturing process. The phosphorescent properties of thermally treated $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphors synthesized by solid state reaction and polymerized complex method were investigated. The crystal structure and crystallite size were observed through XRD analysis. Microstructure and particle size of thermally treated $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphors were analyzed by SEM and PSA. Photoluminescence and afterglow characteristics of thermally treated $SrAl_2O_4:Eu^{2+}$, $Dy^{3+}$ phosphorescent phosphors were measured by spectrofluorometer.

• Analytical Science and Technology
• /
• v.27 no.4
• /
• pp.187-195
• /
• 2014

It is very important to minimize the damage of latent fingerprints at enhancing the contrast. This study proves the enhancement effects of cyanoacrylate-fumed latent fingerprints using p-dimethylaminobenzealdehyde (DMAB) on semi-porous surfaces and the influence factors. The latent fingerprints in experiment were developed for cyanoacrylate treatment in a vacuum chamber and used after drying at room temperature for 24 hours. For fluorescence staining, the cyanoacrylate-developed marks using DMAB were sublimated during 48 hours under the different conditions of surface area, temperature, atmospheric pressure. First experiment showed how surface area effects on the sublimation rate and fluorescence intensity by DMAB of particle size and container size. In addition, the fluorescence staining using DMAB with solvent-free contact method had the greatest fluorescence intensity after 36 hours and a low fluorescence intensity over a certain size of surface area. Second experiment showed that the evaporation of DMAB solid crystals got a satisfying result in a temperature of $20^{\circ}C$ and reduced time to get the greatest fluorescence intensity. It took a long time to get a optimum level of fluorescence intensity at $30^{\circ}C$ or more and it was less effective in fluorescence intensity. Third experiment on the pressure indicated that the fluorescence intensity of vacuum was weaker than nonvacuum but it was inapplicable to very high variations in pressure.

• YAKHAK HOEJI
• /
• v.22 no.1
• /
• pp.15-21
• /
• 1978

Gentamicin sulfate reacted with pyridoxal and zinc (II) ion in pyridine-methanol solution to yield highly fluorescent zinc(II) chelates of N-pyridoxylidene derivatives. This fluorescence reaction was sensitive and showed excitation maximum at 398nm, and emission maximum at 482nm. The effects of reagent concentration, reaction time and temperature, standing time and temperature were studied. And a new fluorophotometric method for the determination of gentamicin sulfate was developed. A good result was obtained and this method was applied to various preparations.

• Journal of Plant Biology
• /
• v.21 no.1_4
• /
• pp.39-44
• /
• 1978

Acid phosphatase activities were analyzed in $\mu\textrm{g}$ tissue samples from an angiosperm parasite (Cuscuta cephalanthi) and its host plant (Hedera helix) by a fluorometric microtechnique. The apex and the coiling portion of the parasite axis exhibited greater enzyme activies than other portions of the hypha. Acid phosphatase activity in the haustorium was 2-3 times that in the hyphal axis. The vascular bundles of the normal host exhibited the greatest enzyme activity. The acid phosphatase activity in the host infected by the parasite decreased to the activity level of the haustorium.