• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.440-440
• /
• 2018

홍수피해의 위험성이 증가하고, 발생 시기가 불규칙해짐에 따라 보다 효과적인 홍수위험관리가 요구되며, 최적의 홍수피해저감대책을 수립하기 위해서는 다양한 홍수피해저감 대책들에 대해서 비용대비 피해저감효과 분석이 필요하다(FLOODsite, 2007). 홍수피해저감효과를 분석하기 위해서는 수리 수문학적 분석을 통한 피해범위와 침수심 등 피해규모를 분석함과 함께 피해규모에 따른 홍수피해액 추정이 가능해야 하며, 이를 통해 홍수피해저감 대책에 대한 비용대비 효과분석 수행이 가능하다(Kim et al., 2014). 국내에서 많이 적용되고 있는 다차원법은 침수편입율을 산정하고 건물에 대해서 손상률에 해당하는 피해율이 제시되어 있으며, 이를 이용하여 구조물과 내용물에 대해 피해액을 추정할 수 있다(Choi et al., 2006a; Choi et al., 2006b; Yi et al., 2010). 그러나, 단독주택, 아파트, 연립주택 등 주택 이외 다른 용도의 건물에 대해서는 손상함수가 없어 우리나라 여건에 맞는 공공건물에 대한 손상함수 개발이 필요한 상황이다. 본 연구에서는 실제 피해지역의 자료들을 토대로 공공건물 용도별 침수심별 손상함수를 개발하고 적용하였다. 공공건물에 대한 손상함수 개발을 위해서는 많은 피해자료의 수집이 필요하나, 실제 공공건물의 경우 다양한 건물유형으로 인하여 유형별 침수사례가 많지 않은 상황이다. 이로 인하여 현장조사에 의한 침수현황 조사는 한계가 있기 때문에 보험가입자에게 사고로 인하여 손해가 발생했을 때 그 손해액을 결정하고 보험금을 산정하는 업무를 수행하는 손해사정사들을 통해 여러 가지 공공건물을 대상으로 침수심별 손상률에 대한 설문 조사를 실시하였다. 본 연구를 통해 공공건물에 대한 손상함수의 개발절차, 침수심별 손상함수의 개발결과, 보완과정 그리고 손상함수의 적용결과에 대한 국내외 기법과의 비교 결과를 제시하였다. 적용결과 본 연구에서 현장 조사 기반으로 개발한 손상률을 적용한 경우 국내 실제 피해액을 가장 잘 반영하는 것으로 분석되었는데, 다만 동일 건물용도(예컨대 공공업무시설)일지라도 바닥재 등 마감재 재질이 건물마다 다르며, 건물별로 공간 활용 여건이 다양하여 동일한 침수심에 대해서 피해액의 변동폭이 크게 발생 되어 동일한 침수심에 대한 피해내용이 달라져 변동폭이 크게 발생되는 한계가 발생하였다. 향후 보다 많은 피해사례를 지속적으로 조사할 필요가 있으며, 이를 통해 손상함수를 개선하기 위한 연구가 계속 진행되어야 할 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.493-500
• /
• 2017

Co-operative education and internships are generally treated as an alternative way to increase the employment rate by resolving the mismatch between college education and the industrial needs of the job specification. Based on a questionnaire survey on Korean universities, this study examined the current status of programs and the operating mechanism for co-operative education and internship to provide policy suggestions for promoting the depth and width of co-operative education in Korean universities. The results of the survey shows that the majority of students carry out internships on a short-term basis and the universities usually lack the capabilities for effectively running the programs of co-operative education and internships. In particular, as a part of the academic curriculum, co-operative education should be focused on the balance and effective linkage between the occupations given to students and the majors in university.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.343-356
• /
• 1994

When most of the industry and social indirect facilities such as the large structure, power plant or road, rail-road are constructed, the new slope may lead to the slope failure. The failure models for slopes have been developed by using the results of in-situ and laboratory tests to investigate the mechanisms and types of the slope failure. The safety factor of a slope may be obtained based on the proposed model and the slope can be reinforced to meet the design criteria. The slope should be reinforced by using the optimum model that properly reflects the site condition, the method of reinforcement includes the increased safety factor either by decreasing a slope angle or by reinforcing the slope.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2014

In this study, TBM selection methods to meet soil and site conditions were presented. Factors and excavation equipment affecting TBM selection by soil and environmental condition were selected and classified. Weights between equipment and influencing factors selected were calculated by applying the AHP (Analytic Hierarchy Process) method. The results of the analysis influence factors, Ground condition was a major factor in objective factors and strength was a major factor in the hard condition of criteria factors and water pressure was a major factor in the soft ground condition of criteria factors. In Environment condition, existence of adjacent structures was evaluated more important than existence of feasible site. Lastly, Adequacy was verified through the deduction of results that coincide with input equipment by applying derived weights to actual site conditions.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.427-432
• /
• 2004

As it is keen competition of a construction market and the recognition that increases construction productivity for maintaining competitiveness, it is increased importance of an interest about productivity and efficiency in the construction industry. This study measures productivity through the instance of investigation that the existing productivity measurement method was utilized and presented a work improvement matter based on the measured contents. The proposed improvement matter is verified through a simulation technique. The purpose of this paper is for a field supervisor to have presented the way that a selection does the most suitable work method to be suitable for a situation, and can forecast production, though a simulation technique is not the most alternative that considered field condition in analyzing productivity measurement.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.137-147
• /
• 2008

This study has investigated fire safety rules related with traditional temples and main fire causes and cases to traditional temples among traditional wooden buildings so has analyzed fire vulnerability, and through a field probe of three traditional temples in Eunpyeonggu Seoul which have cultural properties, has analyzed geographical conditions, going out path spot reaching time required of a fire brigade, fire protection system, fire prevention administration and security system, factors of fire vulnerability, and has presented about fire safety plans of traditional temples.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.55-61
• /
• 2005

Dynamic compaction is a ground improvement technique which is particularly effective for loose granular soils. It has also been used successfully to the cohesive soils with high void ratio, and wastes and fills. For the design of dynamic compaction method, prediction of depth of improvement is very important. The depth of improvement is influenced not only by compaction energy but also by many parameters such as grid spacing, soil property, degree of saturation and site conditions. Based on the test results, the depth of improvement were evaluated with considering compaction energy, soil type and ground water level.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.9-11
• /
• 2014

As Daecheon beach, which is the study area, has problem of erosion and loss of most beach under the extraordinary wave during the typhoon event, it is necessary to apply erosion control measures for short term impact. Therefore, we analyzed the status and reason of the erosion by field survey, collection of hydraulic model test, and numerical model experiment. For the erosion control measure, we adopted beach feeding and submerged reef method available at that site among various counter measures. Numerical analyses were made for both beach feeding only and beach feeding with submerged reefs and these were compared with the present status to find out the optimum design and to contribute for preparing a long term plan of beach loss protection.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.1
• /
• pp.13-25
• /
• 2002

The construction method for Young Dong Tunnel has been chosen following detailed risk assessment. In this paper, the specific risks to the project programme, associated with adopting either mechanical excavation in the form of a shielded TBM, or drill and blast excavation methods, are assessed. From the risk assessment results, and taking other important factors into account, such as project sensitivity and local experience, the recommendation is made that the relatively low risk drill-and-blast method is the most appropriate for construction of Young Dong Tunnel.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.200-206
• /
• 2002

The construction method for the Young Dong Tunnel has been chosen following detailed risk assessment. In this paper, the specific risks to the project programme, associated with adopting either mechanical excavation in the form of a shielded TBM, or drill and blast excavation methods, are assessed. From the risk assessment results, and taking other important factors into account, such as project sensitivity and local experience, the recommendation is made that the relatively low risk drill-and-blast method is the most appropriate for construction of the Young Dong tunnel.