• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.101-110
• /
• 2013

Due to the large specific surface area and great reactivity toward environmental contaminants, nanocrystalline mackinawite (FeS) has been widely applied for the remediation of contaminated groundwater and soil. Furthermore, nanocrystalline FeS is rather thermodynamically stable against anoxic corrosion, and its reactivity can be regenerated continuously by the activity of sulfate-reducing bacteria. However, nanocrystalline mackinawite is prone to either spread out along the groundwater flow or cause pore clogging in aquifers by particle aggregation. Accordingly, this mineral should be modified for the application of permeable reactive barriers (PRBs). In this study, coating methods were investigated by which mackinawite nanoparticles were deposited on the surface of alumina or activated alumina. The amount of FeS coating was found to significantly vary with pH, with the highest amount occurring at pH ~6.9 for both minerals. At this pH, the surfaces of mackinawite and alumina (or activated alumina) were oppositely charged, with the resultant electrostatic attraction making the coating highly effective. At this pH, the coating amounts by alumina and activated alumina were 0.038 and 0.114 $mmol{\cdot}FeS/g$, respectively. Under anoxic conditions, arsenite sorption experiments were conducted with uncoated alumina, uncoated activated alumina, and both minerals coated with FeS at the optimal pH for comparison of their reactivity. Uncoated activated alumina showed the higher arsenite removal compared to uncoated alumina. Notably, the arsenite sorption capacity of activated alumina was little changed by the coating with FeS. This might be attributed to the abundance of highly reactive hydroxyl functional groups (${\equiv}$AlOH) on the surface of activated alumina, making the arsenite sorption by the coated FeS unnoticeable. In contrast, the arsenite sorption capacity of alumina was found to increase substantially by the FeS coating. This was due to the consumption of the surface hydroxyl functional groups on the alumina surface and the subsequent occurrence of As(III) sorption by the coated FeS. Alumina, on the surface area basis, has about 8 times higher FeS coating amount and higher As(III) sorption capacity than silica. This study indicates that alumina is a better candidate than silica for the coating of nanocrystalline mackinawite.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.2
• /
• pp.107-121
• /
• 2010

We conducted a sensitivity test of Joint UK Land Environment Simulator (JULES), in which the influence of biophysical parameters on the simulation of gross primary productivity (GPP) and ecosystem respiration (RE) was investigated for two typical ecosystems in Korea. For this test, we employed the whole-year observation of eddy-covariance fluxes measured in 2006 at two KoFlux sites: (1) a deciduous forest in complex terrain in Gwangneung and (2) a farmland with heterogeneous mosaic patches in Haenam. Our analysis showed that the simulated GPP was most sensitive to the maximum rate of RuBP carboxylation and leaf nitrogen concentration for both ecosystems. RE was sensitive to wood biomass parameter for the deciduous forest in Gwangneung. For the mixed farmland in Haenam, however, RE was most sensitive to the maximum rate of RuBP carboxylation and leaf nitrogen concentration like the simulated GPP. For both sites, the JULES model overestimated both GPP and RE when the default values of input parameters were adopted. Considering the fact that the leaf nitrogen concentration observed at the deciduous forest site was only about 60% of its default value, the significant portion of the model's overestimation can be attributed to such a discrepancy in the input parameters. Our finding demonstrates that the abovementioned key biophysical parameters of the two ecosystems should be evaluated carefully prior to any simulation and interpretation of ecosystem carbon exchange in Korea.

• Microbiology and Biotechnology Letters
• /
• v.38 no.3
• /
• pp.295-301
• /
• 2010

Sheath rot and dry rot disease caused by Pseudomonas marginalis and Fusarium oxysporum were serious problems in garlic farmland. In this study, total of 160 indigenous antagonistic bacteria were isolated from 16 farmlands in Yeongcheon, Korea. Among these, 15 strains were able to inhibited P. marginalis and F. oxysporum. The 16s rDNA genes of the selected 15 strains were amplified and sequenced. The strains has strong antagonistic ability against garlic pathogens was achieved Bacillus subtilis YC82, B. vallismortis YC84, B. amyloliquefaciens YC240. The selected 3 strains tested for investigation of antifungal mechanisms further analyses; 3 strains of these validated for production of siderophore, ${\beta}$-glucanase and chitinase using CAS (chrome azurol S) blue agar, CMC-congo red agar and DNS method. The 3 strains were able to utilized insoluble phosphate as dertermined by vanado-molybdate method. The 3 strains verified for production of auxin and gibberellic acid using Salkowski test and holdbrook test. Also, 3 strains showed stimulation germination, stem growth promoting activity on the in vivo test. The 3 strains were able to effectively suppress P. marginalis and F. oxysporum causing sheath rot and dry rot diseases on the in vivo pot test.

• Communications of Mathematical Education
• /
• v.16
• /
• pp.217-218
• /
• 2003

제7차 교육과정의 기본방향인 '21세기의 세계화 정보화 시대를 주도할 자율적이고 창의적인 한국인 육성'에서 볼 수 있듯이, 새로운 교육과정에서는 학생들의 창의력을 신장시키기 위한 방안으로 교과별 교육과정이나 재량활동 운영 등을 제시한 바 있다. 수학교육에서도 이러한 시대적 흐름에 발맞추어 수학적 창의력의 신장이 강조되고 있는 상황이다. 그동안 이론적인 측면과 실제적인 측면에서 수학적 창의성에 대한 성과가 축적되었다. 이론적인 측면에서 볼 때, Haylock(1987)등에 의해 창의력과 수학적 창의력의 구분되었으며, 특히 '수학적' 창의력에 대한 다양한 정의가 제안되었다. 실제적인 측면에서도 수학적 창의력을 측정하려는 평가 도구들이 그 동안 여러 가지로 개발하였다. 그러나, 이러한 수학적 창의력에 관한 전반적인 연구는 종국적으로 교실 수학수업에 반영되어야 함에도 불구하고, 그리 만족스럽지 못한 상황이다. 특히, 교실에서 수학수업을 실제로 담당하는 교사들이 수학적 창의력을 위한 수업을 하고자 하더라도 당장 가까이에서 구할 수 있는 교수 학습 자료가 여전히 부족한 상황이다. 물론 그 동안 교실 수학수업에서 사용할 수 있는 창의력 개발 프로그램이 전무한 것은 아니다. 그런데 그들 대부분은 게임이나 퍼즐을 이용한 것으로 그 수준이 단순 흥미유발에 그치고 있거나 소수의 영재아를 위한 소재를 중심으로, 특히 수학적 사고 과정을 따르기보다는, 시행착오를 거쳐 원하는 결과를 얻을 가능성이 많으며, 수학과의 연계성이 불분명한 채로 단순놀이에 그치는 경우가 적지 않아, 수업과 연관되어 창의력의 신장이라는 측면에서 볼 때, 적용하기 어려운 사례가 많다. 이러한 상황을 개선하는 데 기여하고자, 현재 교과교육공동연구 지원사업의 하나로 한국 학술 진흥재단의 지원을 받아, '개방형 문제(open-ended problems)'를 중심 소재로 한 '수학적 창의성'을 신장하기 위한 교수학습 프로그램을 개발하여, 중학교 1학년을 대상으로 연구를 진행하고 있다. 개방형 문제라 함은 명백한 정의가 어렵지만 Pehkeon(1995)는 개방형문제의 정의를 명백히 하기위한 시도로서 그 반대로 닫힌 문제에 대한 정의로부터 시작하여, 어떤 문제가 닫혀있다고 하는 것은 그 문제의 출발 상황과 목표 상황이 닫혀 있는 것, 즉 명백히 설명되어있을 때라면 개방형 문제는 이와 반대의 개념임을 시사하였다. Silver(1995)는 개방형 문제를 문제 자체가 다른 해석이 가능하거나 서로 다를 인정할만한 답을 가질 수 있는 문제 또는 풀이과정이 다양한 문제, 자연스럽게 다른 문제들을 제안하거나 일반화를 제시할 수 있는 문제라고 정의하였다. 따라서 개방형 문제란 출발상황이나 목표 상황의 일부가 닫혀있지 않을 때를 말하고 문제의 조건을 만족하는 해답이 여러 가지로 존재하는 문제를 뜻한다. 수학적 창의력을 개발하는 데, 다른 문제 유형보다도, 개방형 문제가 유리하다는 점은 이미 여러 학자들에 의해 주장되어왔다. 미국 국립영재교육센터(NRCG/T)는 기존의 사지선다형이나 단답형 문제와 질문들은 학생들의 사고 능력에 관한 정보를 거의 알려주지 못하기 때문에 한 가지 이상의 답을 요구하는 ‘open-ended' 또는 ’open-response' 문제와 질문을 가지고 수학 분야에서의 창의적 사고 능력과 표현능력을 측정해야 한다고 하였고, 개방형 문제가 일반적으로 정답이 하나인 문제보다 고차원적인 사고를 요구하게 하는 문제 형태라고 하였다. 본 연구에서는 이러한 근거를 바탕으로 개방형 문제의 유형을 다양한 답이 존재하는 문제, 다양한 해결 전략이 가능한 문제, 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확산적 사고의 요소인 유창성, 독창성, 유연성 등에 각각 어떤 영향을 미치는지 20주의 프로그램을 개발, 진행하여 그 효과를 검증하고자 한다. 개방형 문제를 활용한 수학적 창의력 신장 프로그램을 개발하고 현장 학교에 실험 적용하여 그 효과를 분석하고자 하는 본 연구는 창의력 신장에 비중을 두는 수학과 교수-학습 과정에 실제적인 교수 학습 자료를 제공하는 것뿐만 아니라 교사들에게는 수학교실에서 사용 가능한 실제적인 활용방안을, 학생들에게는 주어진 문제를 여러 가지 각도에서 생각하면서 다양한 사고를 경험하는 기회를 가질 수 있어, 수학을 보는 학생들의 태도에도 긍정적인 변화를 가져올 수 있을 것이라 기대한다.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.4
• /
• pp.173-186
• /
• 2008

This study aimed to examine the operation of the Home Economics education courses in the graduate schools of education, and to find out how graduate students perceive them. Data were collected with the use of handbooks issued by 11 graduate schools of education located in Seoul, and through telephone conversations with the administrative staff. To determine how graduate students majoring in Home Economics perceive their Home Economics courses, a survey was conducted among the graduate students in 10 graduate schools of education, and a total of 131 accomplished questionnaires were used for data analysis. The results of the study are as follows. First, all 11 graduate schools aimed to retrain their teachers, enhance their professionalism, and produce home economics education experts. The Home Economics Education courses come in two strands; a teacher's course and a major course. Most of the schools require a total of 30 credits. All Schools lack professors. Only 3 graduate schools have a home Economics Department in the College of Education. All graduate schools are offering a teacher's course based on a teacher's certification system. In a major course, Home Economics education has the largest number of subjects, with Clothing and Textiles and Food and Nutrition being given greater emphasis, and Consumer Economics, Home Economics Management, Child Care, and Family and Housing Studies being given less emphasis. Second, they mostly regard the graduate school of education as producer of experts, followed by producers of teachers and teacher re-trainers. Those who were majoring in Home Economics Education in college, and the teachers, are more interested in teacher re-training, while the non-teachers and those who were not majoring in Home Economics Education are more interested in producing teachers. They are less satisfied with the operation of the graduate school of education. But they are generally satisfied with the Home Economics Education course. Graduate students registered the lowest satisfaction with a major course, especially experimental subjects. For a teacher's course, the graduate students who are not teachers exhibited higher satisfaction, whereas the teachers showed lower satisfaction. But teachers registered more satisfaction with the practical use of major subjects in the educational field, thinking that their major was a big help in their work at a school. As for what has to be improved with regard to the Home Economics Education course, many cited the necessity of securing a good faculty and expanding the major subjects.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.955-965
• /
• 2007

Safety helmets are used widely in various industries by workers since they are legally required to wear them. However, thermal discomfort is one of the major complaints from helmet users. To relieve this problem, frozen gelled packs can be considered for use inside the helmets. In this paper, tests were performed on humans to evaluate the physiological strains of wearing safety helmets and to investigate the effects of using frozen gelled packs inside the helmets. Experiments were conducted in a climatic chamber of WBGT $33{\pm}1^{\circ}C$ under four differed experimental conditions: 1) not wearing a safety helmet(NH); 2) wearing a safety helmet with frozen gelled pack A(HA); 3) wearing a safety helmet with frozen gelled pack B(HB); and 4) wearing only a safety helmet(OH). The results were as follows. First, when comparing NH with OH, physiological responses such as $\bar{T}_{sk},\;T_r$, HR and sweat rate were significantly higher in OH and subjective sensations were reported as less hot and more comfortable than NH(p<.05). Second, in regard to the frozen gelled packs inserted inside the safety helmets, some physiological responses in HA were different from those in HB, according to the two different types of packs. HA was hotter, more uncomfortable and less exhausted than HB. However, result from both HA and HB were lower than those from OH in terms of temperature and humidity inside safety helmet, sweat rate, $T_r$ increase, heat storage(p<.05). When wearing safety helmets with frozen gelled packs, it was shown that heat strain can be alleviated. These results are expected to help millions of workers who complain that wearing safety helmets is uncomfortable and messy.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.496-513
• /
• 2004

This study was carried out to evaluate the performance of sampling and analytical methodology used for the measurement of toxic volatile organic compounds (VOCs) in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/MSD analysis. Target analytes were 33 compounds including major aromatic compounds such as BTEX, and halogenated compounds. The methodology was investigated with a wide range of different adsorbents which are commercially available and have been frequently adopted for the VOC measurement. A total of 10 adsorbents were tested in this study: 6 carbon-based adsorbents such as Carbotrap, Carbopack B, Carbosieve S-III, Carboxen 1000, Carbotrap C, Activated Charcoal; and 4 polymer-based adsorbents including Tenax, Porapak Q, Chromosorb 102, and Chromosorb 106. The sampling performance was evaluated with respect to the sampling capacity of VOCs with single-adsorbent and multiple-adsorbents methods for standard samples and field samples. As a result, the best adsorbents for single-adsorbent method in the sampling of toxic organic compounds (including benzene, toluene, xylenes etc.) appeared to be Carbotrap, Carbopack B and Tenax TA. On the other hand, Chromosorb 102, Chromosorb 106 and Porapak Q were found to be unsuitable adsorbents for VOC measurement based on thermal desorption method. Multi-adsorbent packings were evaluated with 4 carbon-based adsorbents, which classified by 3 combination sets of double adsorbents and 2 combination sets of triple adsorbents. The results indicated that the most suitable combination for toixc VOC measurements is Carbotrap C with Carbotrap. Multi-sorbents tubes packed with a strong adsorbent such as Carbosieve S-III or Carboxen 1000 were found to be relatively unsuitable for several compounds, not only owing to the effect of migration of adsorbed compounds from weaker adsorbent to stronger adsorbent, but to hydrophobic nature of the adsorbents. Therefore, it should be addressed that selection of a proper adsorbent (or combination of multi sorbents) is extremely important to obtain reliable data for the concentrations of toxic VOCs in indoor and outdoor environments.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.420-426
• /
• 2012

The purpose of this study was to identify control points through microbiological hazard analysis in the manufacturing processes of starch noodles. Samples were collected from the ingredients, manufacturing processes, equipment and environment. Microbiological hazard assessments were performed using aerobic plate counts (APC), Enterobacteriaceae (EB), E. coli and five pathogens including B. cereus, E. coli O157:H7, L. monocytogenes, Salmonella spp., and S. aureus. The APC levels in raw materials were from 2.12 to 3.83 log CFU/g. The contamination levels after kneading were 4.31 log CFU/g for APCs and 2.88 log CFU/g for EB counts. APCs decreased to 1.63 log CFU/g and EB were not detected after gelatinization, but their levels slightly increased upon cooling, cutting, ripening, freezing, thawing, and separating. The reuse of cooling and coating water would be a critical source of microbial increase after cooling. After drying, APCs and EB counts decreased to 5.05 log CFU/g and 2.74 log CFU/g, respectively, and the levels were maintained to final products. These results suggest that the cooling process is a critical control point for microbiological safety, and the cooling water should be treated and controlled to prevent cross contamination by pre-requisite program.