• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.235-243
• /
• 2007

Nowadays, in our country, large vacuum chambers for huge experimental facilities such as the tokamak fusion device, high power neural beam test stand, and space simulator have been constructed. In such a vacuum chamber of very large size, it is quite complicate to check on leakage quantitatively, while the probability of a leak is relatively high. To investigate the feasibility of applying reliably a helium leak detection to the huge vacuum chambers, and to find a reasonable methodology of choosing an optimum set-up for leak detection, several virtual constructions of the leak detection system have been analyzed by calculating the pressure distribution in the system and the helium level in the sensor part.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.9-15
• /
• 2001

The total pressure and partial pressure of small cavity for flat panel display have been successfully measured by using an ultra-high vacuum chamber with mass spectrometer. The total pressure in the panel was in the range of $10^{-6}$ Torr and the major partial pressure affecting increase in total pressure were those of Ar, $CH_4$and He. The baking temperature during evacuation process was very important for high-vacuum package, the total pressure and partial pressure of $CH_4$ were decreased as the increase of baking temperature.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.133-137
• /
• 1996

본연구에서는 n-type 세라믹 초전도체인 Nd2-xCexCuO4상의 산소함량에 따른 \ulcorner기적저항의 변화를 고찰하고자 하였다. 일반적인 소결과 어닐링과정을 결쳐 제조된 Nd1.85Ce0.15CuO4-x 시편을 여러 온도와 산소분압의 분위기하에서 어닐링시킴으로써 산소의 함유량이 다른 시편들을 준비하였고 각각의 시편의 산소함량은 TGA(Thermogravimetric Analysis0에 의해 측정하였다. Nd1.85Ce0.15CuO4-x시편의 전기적 저항 측정은 표준 4-탐침방법을 이용하여 액체헬륨을 주입시켜 상온으로부터 4K까지 측정하였다. Nd1.85Ce0.15CuO4-x시편의 산소함량, 3.96$\leq$4-x$\leq$4.0의 범위에서 전기적저항을 측정한 결과 초전도특성이 나타나기 시작한 임계산소함량은 4-x=3.990이었고 이때의 임계온도 Tc=12K이었다. 또한 임계온도, Tc는 산소함량 4-x=3.96에서 24K로 측정되었다. 특이할 만한 현상은 CuO/Cu2O 열역학적 상전이가 일어나는 조건이 Nd1.85Ce0.15CuO4-x 시편의 초전도가 일어나는 임계와 일치하였다. 즉, Cu2O가 안정한 영역에서는 초전도특성이 나타났고 CuO가 안정한 영역에서는 초전도특성이 나타나지 않았다.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.2
• /
• pp.34-41
• /
• 2011

Wrought nickel-base superalloys are being considered as the structural materials in very-high temperature gas-cooled reactors. To understand the effects of impurities, especially oxygen, in helium coolant on the mechanical properties of Alloy 617, creep tests were performed in high temperature flowing He environments with varying $O_2$ contents at 800, 900, and $1000^{\circ}C$. Also, creep life in static He was measured to simulate the pseudo-inert environment. Creep life was the longest in static He, while the shortest in flowing helium. In static He, impurities like $O_2$ and moisture were quickly consumed by oxidation in the early stage of creep test, which prevented further oxidation during creep test. Without oxidation, microstructural change detrimental to creep such as decarburization and internal oxidation were prevented, which resulted in longer creep life. On the other hand, in flowing He environment, surface oxides were not stable enough to act as diffusion barriers for oxidation. Therefore, extensive decarburization and internal oxidation under tensile load contributed to premature failure resulting in short creep life. Limited test in flowing He+200ppm $O_2$ resulted in even shorter creep life. The oxidation samples showed extensive spallation which resulted in severe decarburization and internal oxidation in those environments. Further test and analysis are underway to clarify the relationship between oxidation and creep resistance.