• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.173-180
• /
• 2006

An airborne radar is an essential aviation electronic system of the aircraft to perform various missions in all weather environments. This paper presents the design, development, and test results of the multi-mode pulsed Doppler radar system test model for helicopter-borne flight test. This radar system consists of 4 LRU units, which include ANTU(Antenna Unit), TRU(Tx Rx Unit), RSDU(Radar Signal & Data Processing Unit) and DISU(Display Unit). The developed technologies include the TACCAR processor, planar array antenna, TWTA transmitter, coherent I/Q detector, digital pulse compression, DSP based Doppler FFT filtering, adaptive CFAR, IMU, and tracking capability. The design performance of the developed radar system is verified through various helicopter-borne field tests including MTD (Moving Target Detector) capability for the Doppler compensation due to the moving platform motion.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.415-422
• /
• 2014

There has been a lot of discussion to revise military helicopter crashworthiness design criteria. In this paper, newly revised crashworthiness criteria is analyzed centering around the Crashworthiness Index which is the core content of revised criteria. The Crashworthiness Index(CI) was conceived as an adequate method to quantify the crashworthiness capabilities of a rotorcraft design. The index can rate how well a new or derivative design complies with design requirements. The CI rating is made up of seven assessment areas. While the Basic Airframe Crashworthiness(BAC) area tends to be an objective calculation, other areas of the CI tend to be more subjective. Therefore, in this paper, detail CI calculation process for the BAC area is analyzed to inspect the effectiveness of revised criteria.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.34-39
• /
• 2015

KCG, responsible Agency of maritime SAR operation has been known to address the marine casualties well, however, it was criticized because KCG failed to take prompt and effective response to the recent Ferry disaster at the very early stage. In this regards, the authors analyze the characteristics of marine incident with historical data, and also review and examine the national SAR system focusing on SAR coordination and human resources to make recommendation and suggestion in order to minimize the loss of lives to future marine incidents. As a result, KCG shall augment its capabilities, inter alia, fast libeboats and rescue helicopters for prompt response to marine incidents at the coastal waters, and KCG shall re-adjust the establishment of Rescue Coordination Center to improve operational problems of current system in accordance with IMO guidance, KCG is required to introduce mandatory training, qualification and certificate system to enhance the professionalism of SAR personnel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1808-1818
• /
• 2015

Recently, the wind power has experienced great attentions and growths among many renewable energy sources. To increase the power generation performance and economic feasibility, the size of wind turbine (WT) is getting bigger and most of wind power plants are being constructed on offshore. Therefore, the maintenance cost is relatively high because boats or helicopters are needed operators to reach the WT. In order to combat this kind of problem, remote monitoring and control system for the WT is needed. In this paper, the small-scale WT monitoring and control system is implemented using wireless sensor network technologies. To do this, sensor devices are installed to measure and send the WT status and control device is installed to receive control message for specific operation. The WT is managed by control center through graphic user interface (GUI) based monitoring and control software. Also, smart device based web-program is implemented to make the remote monitoring of the WT possible even though operators are not in control room.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.67-72
• /
• 2020

Life tests are essential in reducing the catastrophic damage caused by the accidents of large machinery such as aircraft and ships. However, life tests are challenging to implement due to the high costs and time required to test the life of large machinery parts. Therefore, it is advantageous and convenient to apply accelerated life test techniques for key components to reduce costs and time. In fact, extensive research has already been conducted on these techniques. However, recently, there have been cases in which an experimental value was applied to the shape parameter of the Weibull distribution used in the reliability test, but the test time was not significantly reduced. Therefore, in this paper, the shape parameters are estimated from the probability density function of the Weibull distribution for the analysis of an accelerated life test for bladder accumulators, which are core components of military helicopters. The test time was derived based on the number of samples and confidence level by substituting it into the test time equation. Next, the accelerated life test time was calculated using the steady-state test time with an acceleration factor obtained from the Arrhenius model. The steady-state life test required approximately 15,000 H, whereas the accelerated life test time for one sample at 100 ℃ was 34% shorter than that of the steady-state life test.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.28-34
• /
• 2010

The spatial distribution characteristics of damaged trees by the pine wilt disease appear scattered spots spreading from single dead trees. That is the reason why it is difficult to early detect damage and to prevent from extensive damage. Thus, it is very important to forecast and analyze the damage occurrences, to establish strategies for prevention, and to supervise them. However, conventional survey which observes around roads or residential areas by naked eyes was impossible to investigate completely, missing target areas and dangerous areas. Therefore, aerial forecasting techniques on the damaged area were developed using GIS, GPS, and helicopters for an accurate observation of systematic and scientific approach in this study. Moreover, advantages of the techniques application were confirmed to survey 972 dead tree samples at 349 position-coordinates in 32 cities (about $28,810km^2$), 2005. This study is expected to apply widely to find dead trees and the causes, particularly by pine wilt disease.

• Journal of the Korean Geographical Society
• /
• v.37 no.5
• /
• pp.511-521
• /
• 2002

Coastal sand dunes in West coast of Korea are under stress. Due to the newly constructed Seohaean(West Coast) Highways, the number of visitors and the anthropogenic pressures will keep rising in near future. Sea level rise due to the global warming may cause a lot of damage to the natural resources and residents of coastal area. Therefore, many countries including United States are doing nationwide coastline survey using highly sophisticated methodology. In this study, high resolution IKONOS satellite images along with aerial photographs taken since 1960's have been sequentially analyzed using GIS software (Erdas Imagine 8.3). Onsite monitoring has been performed at the 31 measuring points in 10 beaches since the May of 2001 in order to measure the sand budget. Post-construction monitoring after installation of sand fences is also being done on sites regularly. Restoration works seem to be effective at this moment.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.2
• /
• pp.113-124
• /
• 2014

In developing an aircraft, configuration determination and requirement proofing depend on flight test results. Since the flight tests require much time and high cost, systematic flight test planning and analysis are needed to reduce cost and development time. This paper presents a desirability function approach to present an integrative measure of vibration levels at important positions and suggests a fractional factorial design which is one of the experimental design methods to help perform systematic flight tests. A method to perform flight tests in stages is also suggested to further reduce the number of flight tests.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.325-338
• /
• 2014

Purpose: The purpose of this study was to explain de-painting phenomenon of KUH-1 tail blade and to propose useful solution of it by test. The proposed solution was evaluated by real flight, and then it applied to mass product to improve the paint qual ity of KUH-1 tail blade. Methods: This study investigated an adhesive ability of primer following surface sanding condition. The cross cut and scratch test were conducted to evaluate the adhesive strength. And the water flow test was designed to simulate a real flight condition under rain. Through water flow test, an optimal condition of tail blade to prevent a de-painting phenomenon was deduced. Finally, the improvement method was evaluated by real flight under rain. Results: The results of this study are as follows; The sequential polishing was most excellent method in primer painting quality. The results of test including cross cut, scratch and water flow showed that MIL-DTL-53039 paint with epoxy primer has excellent adhesive ability. To proof the effect of improvement, a real flight during a rain condition was conducted. Finally, the comparison between original and improved configuration was conducted. Conclusion: The painting quality of KUH-1 tail blade was improved through deriving an optimal painting condition. In detail, a condition of optimal sanding and a sort of primer and paint was showed. Finally, the reliability of tail blade was guaranteed through improving the quality of painting.

• Journal of Trauma and Injury
• /
• v.28 no.3
• /
• pp.108-114
• /
• 2015

Purpose: To improve outcome of severe trauma patient, the shortening of transport time is needed. Although helicopter emergency medical services (HEMS) is still a subject of debate, it must also be considered for trauma system. The aim of this study is to assess whether transport method (HEMS versus ground EMS) is associated with outcome among inter-hospital transport. Methods: All trauma patients transported to regional emergency center by either HEMS or ground EMS from September 2011 to September 2014. We have classified patients according to two groups by transport method. Age younger than 15 years and self-discharged patients were excluded. Results: A total of 427 patients were available for analysis during this period. 60 patients were transported by HEMS and 367 patients were transported by ground EMS. HEMS group had higher mortality than ground EMS group (23.3% vs 3.5%; p<0.001), and included more patients with excess mortality ratio adjusted injury severity score (EMR-ISS) above 25 (91.7% vs 48.8%; p<0.001). In the multivariable regression analysis, HEMS was not associated with improved outcome compared with ground EMS, but only EMR-ISS was associated with a mortality of patients (odds ratio, 1.06; 95% confidence interval, 1.04-1.09). Conclusion: In this study, helicopter emergency medical services transport was not associated with a decreased of mortality among the trauma patients who inter-hospital transported to the regional emergency center.